参数资料
型号: MB90F584CAPF
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 20 MM, 3.35 MM HEIGHT, 0.65 MM PITCH, PLASTIC, QFP-100
文件页数: 26/112页
文件大小: 2251K
代理商: MB90F584CAPF
MB90580C Series
20
DS07-13710-7E
It is recommended to provide a bypass capacitor of around 0.1
μF between VCC and VSS pin near the device.
6.
Crystal Oscillator Circuit
Noises around X0 or X1 pins may be possible causes of abnormal operations. Make sure to provide bypass
capacitors via shortest distance from X0, X1 pins, crystal oscillator (or ceramic resonator) and ground lines, and
make sure, to the utmost effort, that lines of oscillation circuit not cross the lines of other circuits.
It is highly recommended to provide a printed circuit board art work surrounding X0 and X1 pins with an grand
area for stabilizing the operation.
7.
Turning-on Sequence of Power Supply to A/D Converter and Analog Inputs
Make sure to turn on the A/D converter power supply (AVCC, AVSS, AVRH, AVRL) and analog inputs (AN0 to
AN7) after turning-on the digital power supply (VCC).
Turn-off the digital power after turning off the A/D converter supply and analog inputs. In this case, make sure
that the voltage of AVRH dose not exceed AVCC (turning on/off the analog and digital power supplies simulta-
neously is acceptable).
8.
Connection of Unused Pins of A/D Converter
Connect unused pin of A/D converter to AVCC = VCC, AVSS = AVRH = AVRL = VSS.
9.
Connection of Unused Pins of D/A Converter
Connect unused pin of D/A converter to DVRH = VSS, DVSS = VSS.
10. N.C. Pin
The N.C. (internally connected) pin must be opened for use.
11. Notes on Energization
To prevent the internal regulator circuit from malfunctioning, set the voltage rise time during energization at 50
μs or more (0.2 V to 2.7 V).
12. Use of the sub-clock
Use the one clock system parts when the sub-clock is not used. Connected the oscillator under 32 kHz to the
both terminals XA0 and X1A for the two clocks system parts. Pull-down the terminal X0A and leave the terminal
X0A open for the one clock system parts.
VCC
VSS
MB90580C
Series
相关PDF资料
PDF描述
M37542F8HP 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQCC36
M38037M6H-XXXSP 8-BIT, MROM, 8.4 MHz, MICROCONTROLLER, PDIP64
M38513E4FP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDSO42
M37225M8-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37272EFFP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDSO42
相关代理商/技术参数
参数描述
MB90F591GPFR-GE1 制造商:FUJITSU 功能描述:
MB90F594APFR-GE1 制造商:FUJITSU 功能描述:
MB90F594GPFR-GE1 制造商:FUJITSU 功能描述:
MB90F598GPFR-GE1 制造商:FUJITSU 功能描述:
MB90F598GPFR-GSE1 功能描述:IC MCU 16BIT 制造商:cypress semiconductor corp 系列:F2MC-16LX MB90595G 包装:托盘 零件状态:在售 核心处理器:F2MC-16LX 核心尺寸:16-位 速度:16MHz 连接性:CAN,EBI/EMI,SCI,串行输入/输出,UART/USART 外设:POR,PWM,WDT I/O 数:78 程序存储容量:128KB(128K x 8) 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:4K x 8 电压 - 电源(Vcc/Vdd):3 V ~ 5.5 V 数据转换器:A/D 8x8/10b 振荡器类型:外部 工作温度:-40°C ~ 85°C(TA) 封装/外壳:100-BQFP 供应商器件封装:100-PQFP(20x14) 标准包装:66