参数资料
型号: MB91133PMT2-XXX
厂商: FUJITSU LTD
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 33 MHz, RISC MICROCONTROLLER, PQFP144
封装: PLASTIC, LQFP-144
文件页数: 90/112页
文件大小: 508K
代理商: MB91133PMT2-XXX
MB91133/MB91F133A
79
14. UART
UART is the general-purpose serial data communications interface to carry out synchronous or asynchronous
communication (start-stop synchronization) with external systems. It has a master/slave-type communications
function (multiprocessor mode: supporting only master side) as well as normal bi-directional communications
function (normal mode).
UART Functions
UART is the general-purpose serial data communications interface that sends and receives serial data to/from
other CPUs and peripheral equipment, and has functions shown in “UART Functions Table”.
UART Functions Table
Note : Start
/ stop bits are not added by UART and only data is transferred.
UART Operations Mode Table
: Setting is impossible
*1 : “
+ 1” is address / data selection bit (A/D) to be used to control communications.
*2 : 1-bit only can be detected for stop bit in case of reception.
Operations mode
Data length
Synchronization
method
Stop bit length
Without parity
With parity
0
Normal mode
7-bit or 8-bit
Asynchronous
1-bit or 2-bit *2
1
Multiprocessor mode
8
+ 1*1
Asynchronous
2Normal mode
8
Synchronous
N/A
Functions
Data buffer
Full-duplex double buffer
Transfer mode
Clock synchronous (without start-stop bit)
Clock asynchronous (start-stop cycle)
Baud rate
Dedicated baud rate generator is available. Can be selected from 8 types.
External clock input is possible.
Internal clock (Internal clocks that are provided from 16-bit reload timer support-
ing each channel can be used.)
Data length
7-bit (in case of asynchronous normal mode only)
8-bit
Signal method
Non Return to Zero (NRZ) method
Reception error detection
Framing error
Overrun error
Parity error (impossible in case of multiprocessor mode)
Interruption request
Reception interruption (reception completion, reception error detection)
Transmission interruption (transmission completion)
Master/slave-type
communications function
(Multiprocessor mode)
Communication between 1 (master) and n (slaves) is possible
(Only supports master side)
相关PDF资料
PDF描述
MB91F133APMT2 32-BIT, FLASH, 33 MHz, RISC MICROCONTROLLER, PBGA144
MB91233LLGA-G-XXX-BNDE1 32-BIT, MROM, 33.6 MHz, RISC MICROCONTROLLER, PBGA128
MB91263BPF-G-XXX-BND 32-BIT, MROM, 33 MHz, RISC MICROCONTROLLER, PQFP100
MB91F264BPFV-G-E1 32-BIT, FLASH, 33 MHz, RISC MICROCONTROLLER, PQFP100
MB91264BPFV-G-XXX 32-BIT, MROM, 33 MHz, RISC MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
MB91150 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91151A 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91151APMT2-G 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91154 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers
MB91154PFV-G 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Proprietary Microcontrollers