参数资料
型号: MB91F478PMC1-GE1
厂商: Fujitsu Semiconductor America Inc
文件页数: 92/94页
文件大小: 0K
描述: IC MCU 384KB FLASH 144LFQFP
标准包装: 1
系列: FR MB91470
核心处理器: FR60 RISC
芯体尺寸: 32-位
速度: 80MHz
连通性: EBI/EMI,I²C,FIFO,SIO
外围设备: DMA,PWM,WDT
输入/输出数: 113
程序存储器容量: 384KB(384K x 8)
程序存储器类型: 闪存
RAM 容量: 24K x 8
电压 - 电源 (Vcc/Vdd): 4 V ~ 5.5 V
数据转换器: A/D 12x8/10b,4x12b
振荡器型: 外部
工作温度: -40°C ~ 85°C
封装/外壳: 144-LQFP
包装: 托盘
其它名称: 865-1094
94
32015G–AVR32–09/09
AT32AP7001
99. The oscillator has a rather long start-up time of 32768 clock cycles, and no clocks will be
generated in the device during this start-up time.
Note that in static sleep mode the startup counter will start at the negedge of reset and not at the
posedge.
Pulling OSCEN_N high will also disable the 32 KHz oscillator, and a 32 KHz clock must be
applied on the XIN32 pin. No start-up time applies to this clock.
11.5.3
PLL operation
The device contains two PLL’s, PLL0 and PLL1. These are disabled by default, but can be
enabled to provide high frequency source clocks for synchronous or generic clocks. The PLL’s
can take either Oscillator 0 or 1 as clock source. Each PLL has an input divider, which divides
the source clock, creating the reference clock for the PLL. The PLL output is divided by a user-
defined factor, and the PLL compares the resulting clock to the reference clock. The PLL will
adjust its output frequency until the two compared clocks are equal, thus locking the output fre-
quency to a multiple of the reference clock frequency.
When the PLL is switched on, or when changing the clock source or multiplication or division
factor for the PLL, the PLL is unlocked and the output frequency is undefined. The PLL clock for
the digital logic is automatically masked when the PLL is unlocked, to prevent connected digital
logic from receiving a too high frequency and thus become unstable.
相关PDF资料
PDF描述
MB91F662PMC-GE1 IC MCU 512KB FLASH FR80 120-LQFP
MB95F108AJWPMC-GE1 IC MCU 60K FLASH 64-LQFP
MB95F118JWPMC-GE1 IC MCU 60K FLASH 2KB RAM 52LQFP
MB95F128DPMC-GE1 IC MCU FLASH 60K ROM 100LQFP
MB95F128JBPF-GE1 IC MCU 60KB FLASH 100QFP
相关代理商/技术参数
参数描述
MB91F479 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Microcontrollers
MB91F479BGL-GE1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:32-bit Microcontrollers
MB91F479PM1RGE1 制造商:FUJITSU 功能描述:Pb Free
MB91F479PM1R-GE1 制造商:FUJITSU 功能描述: 制造商:FUJITSU 功能描述:MCU 32BIT FR 512K FLASH 144QFP
MB91F479PMC1-GE1 功能描述:IC MCU 512KB FLASH 144-LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:FR MB91470 标准包装:38 系列:Encore!® XP® 核心处理器:eZ8 芯体尺寸:8-位 速度:5MHz 连通性:IrDA,UART/USART 外围设备:欠压检测/复位,LED,POR,PWM,WDT 输入/输出数:16 程序存储器容量:4KB(4K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):2.7 V ~ 3.6 V 数据转换器:- 振荡器型:内部 工作温度:-40°C ~ 105°C 封装/外壳:20-SOIC(0.295",7.50mm 宽) 包装:管件 其它名称:269-4116Z8F0413SH005EG-ND