参数资料
型号: MB95F168MPMC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQFP64
封装: 12 X 12 MM, 1.70 MM HEIGHT, 0.65 MM PITCH, PLASTIC, LFQFP-64
文件页数: 7/76页
文件大小: 1492K
代理商: MB95F168MPMC
MB95160M Series
15
Mode Pin (MOD)
Connect the MOD pin directly to VCC or VSS.
To prevent the device unintentionally entering test mode due to noise, lay out the printed circuit board so as to
minimize the distance from the MOD pin to VCC or VSS and to provide a low-impedance connection.
Use a ceramic capacitor or a capacitor with equivalent frequency characteristics. A bypass capacitor of VCC pin
must have a capacitance value higher than CS. For connection of smoothing capacitor CS, refer to the diagram
below.
Analog Power Supply
Always set the same potential to AVCC and VCC pins. When VCC
> AVCC, the current may flow through the AN00
to AN07 pins.
Treatment of Power Supply Pins on A/D Converter
Connect to be AVCC
= VCC and AVSS = AVR = VSS even if the A/D converter is not in use.
Noise riding on the AVCC pin may cause accuracy degradation. So, connect approx. 0.1
F ceramic capacitor
as a bypass capacitor between AVCC and AVSS pins in the vicinity of this device.
C
CS
C pin connection diagram
相关PDF资料
PDF描述
MC9S12XEQ512CAGR 32-BIT, FLASH, 50 MHz, RISC MICROCONTROLLER, PQFP144
MC9S08RC16DWE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDSO28
MC9S08RE8FDE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, QCC48
MPC8270VVTPEX 32-BIT, 400 MHz, RISC PROCESSOR, PBGA480
M38D59FFFP 8-BIT, FLASH, 6.25 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
MB95F168MPMC1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Microcontroller
MB95F168N 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Microcontroller
MB95F168NPMC 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Microcontroller
MB95F168NPMC1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Microcontroller
MB95F202HP-G-SH-SNE2 制造商:FUJITSU 功能描述:8-bit Microcontroller