参数资料
型号: MB95F562KPFT-G-JNE2
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PDSO20
封装: 4.40 X 6.50 MM, 1.20 MM HEIGHT, 0.65 MM PITCH, PLASTIC, TSSOP-20
文件页数: 23/84页
文件大小: 3941K
代理商: MB95F562KPFT-G-JNE2
MB95560H/570H/580H Series
DS702-00010-2v0-E
3
■ PRODUCT LINE-UP
MB95560H Series
(Continued)
Part number
Parameter
MB95F562H
MB95F563H
MB95F564H
MB95F562K
MB95F563K
MB95F564K
Type
Flash memory product
Clock
supervisor
counter
It supervises the main clock oscillation.
Flash memory
capacity
8 Kbyte
12 Kbyte
20 Kbyte
8 Kbyte
12 Kbyte
20 Kbyte
RAM capacity
240 bytes
496 bytes
240 bytes
496 bytes
Power-on reset
Yes
Low-voltage
detection reset
No
Yes
Reset input
Dedicated
Selected through software
CPU functions
Number of basic instructions
: 136
Instruction bit length
: 8 bits
Instruction length
: 1 to 3 bytes
Data bit length
: 1, 8 and 16 bits
Minimum instruction execution time : 61.5 ns (machine clock frequency = 16.25 MHz)
Interrupt processing time
: 0.6 s (machine clock frequency = 16.25 MHz)
General-
purpose I/O
I/O ports (Max) : 16
CMOS I/O
: 15
N-ch open drain: 1
I/O ports (Max) : 17
CMOS I/O
: 15
N-ch open drain: 2
Time-base timer Interval time: 0.256 ms to 8.3 s (external clock frequency = 4 MHz)
Hardware/
software
watchdog timer
Reset generation cycle
Main oscillation clock at 10 MHz: 105 ms (Min)
The sub-CR clock can be used as the source clock of the hardware watchdog timer.
Wild register
It can be used to replace 3 bytes of data.
LIN-UART
A wide range of communication speed can be selected by a dedicated reload timer.
It has a full duplex double buffer.
Clock-synchronized serial data transfer and clock-asynchronized serial data transfer is en-
abled.
The LIN function can be used as a LIN master or a LIN slave.
8/10-bit A/D
converter
6 channels
8-bit or 10-bit resolution can be selected.
8/16-bit
composite timer
2 channels
The timer can be configured as an "8-bit timer
× 2 channels" or a "16-bit timer × 1 channel".
It has built-in timer function, PWC function, PWM function and input capture function.
Count clock: it can be selected from internal clocks (seven types) and external clocks.
It can output square wave.
External
interrupt
6 channels
Interrupt by edge detection (The rising edge, falling edge, or both edges can be selected.)
It can be used to wake up the device from the standby mode.
On-chip debug
1-wire serial control
It supports serial writing (asynchronous mode).
相关PDF资料
PDF描述
MB95F582KPF-G-JNE2 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PDSO16
MB9BF404RAPMC 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP120
MSP430FR5729IRHA 16-BIT, 24 MHz, RISC MICROCONTROLLER, PQCC40
MSM80C154-GS-VIK 8-BIT, 12 MHz, MICROCONTROLLER, PQFP44
MSM83C154-1JS 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
相关代理商/技术参数
参数描述
MB95F563HWQN-G-JNERE1 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:8-bit Microcontrollers
MB95F564KPF-G-JNE2 功能描述:IC MCU 8BIT 20KB FLASH 20TSSOP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:8FX MB95560H 标准包装:60 系列:PSOC® 3 CY8C38xx 核心处理器:8051 芯体尺寸:8-位 速度:67MHz 连通性:EBI/EMI,I²C,LIN,SPI,UART/USART 外围设备:电容感应,DMA,LCD,POR,PWM,WDT 输入/输出数:25 程序存储器容量:64KB(64K x 8) 程序存储器类型:闪存 EEPROM 大小:2K x 8 RAM 容量:8K x 8 电压 - 电源 (Vcc/Vdd):1.71 V ~ 5.5 V 数据转换器:A/D 2x20b,D/A 4x8b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:48-VFQFN 裸露焊盘 包装:托盘
MB95F636HP-ES-SH-SNE2 制造商:FUJITSU 功能描述:8-bit MCU
MB95F636HPMC-ES-SNE2 制造商:FUJITSU 功能描述:8-bit FX series microcontroller
MB95F636HWQN-ES-SNE1 制造商:FUJITSU 功能描述:8-bit MCU