- 您现在的位置：买卖IC网 > PDF目录262951 > MC03S6NZQF (ITT CANNON) ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED PDF资料下载
参数资料
| 型号： | MC03S6NZQF |
| 厂商： | ITT CANNON |
| 元件分类： | 开关 |
| 英文描述： | ROTARY SWITCH-3POSITIONS, SP3T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED |
| 封装： | ROHS COMPLIANT |
| 文件页数： | 5/6页 |
| 文件大小： | 405K |
| 代理商： | MC03S6NZQF |
L–16
L
Rotary
C&K M Series
Half-inch Rotary Switches
SEAL
P/N 537100000
P/N 537202000
36 Indexing Models
Top View
30 Indexing Models
Top View
Fig. 1
Fig. 2
Fig. 3
36 Indexing Models
Top View
30 Indexing Models
Top View
Fig. 4
Fig. 5
Fig. 6
F
SPLASHPROOF SHAFT AND PANEL SEAL
D
NO EPOXY SEAL
Setting Stops With Stop Pins
MA00, MB00, MC00 & MD00 Models Only:
The number of switch positions or stops are adjustable by means of stop pins provided with each switch. Switches are normally
shipped with stop pins and hardware in bulk, not installed. Without stop pins, switches have full 360 rotation and no stops.
Note that all two pole models begin to repeat when actuated 180 or more.
To set stops, refer to figures 1 & 2. Orient switch so that terminal no. 1 is as shown. Turn actuator to position 1, using flats on
bushing and terminal no. 1 as reference. Install CCW stop pin in hole designated ‘X’. Install second stop pin in hole number
corresponding to the number of positions desired. Note that two pole models will begin to repeat when actuated 180 or more.
To retain stop pins, use adhesive mylar washer included; see figure 3.
All models except MX00 models have number of switch positions or stops pre-set at factory and are not adjustable.
Hardware:
Two stop pins, mounting nut, and lockwasher supplied standard.
Setting Stops With Stop Rings
ME00, MF00, MG00 & MH00 Models Only:
The number of switch positions or stops are adjustable by means of stop rings provided with each switch. These models are
normally shipped with stop rings and hardware in bulk, not installed. Without stop rings, switches have full 360 rotation and no
stops. Note that all two pole models begin to repeat when actuated 180 or more.
To set stops refer to figures 4 & 5. Orient switch so that terminal no. 1 is as shown. Turn actuator to pos. 1 using flats on bushing
and terminal no. 1 as reference. See figure 6 and install inner stop ring with short tab in hole designated ‘X’. Install outer
stop ring with long tab in hole number corresponding to the number of positions desired. Note that all two pole models begin to
repeat when actuated 180 or more. Use mounting nut and lockwasher to retain stop rings.
All MEXX, MFXX, MGXX & MHXX Models (Except MX00 models):
Number of switch positions or stops are preset at factory, but are user adjustable.
Hardware:
Two stop rings, mounting nut and lockwasher supplied standard.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
相关PDF资料 |
PDF描述 |
|---|---|
| MC07L3NCQD | ROTARY SWITCH-7POSITIONS, SP7T, LATCHED, 0.25A, 28VDC, THROUGH HOLE-STRAIGHT |
| MC07S1NCGF | ROTARY SWITCH-7POSITIONS, SP7T, LATCHED, 0.25A, 28VDC, THROUGH HOLE-STRAIGHT |
| MC07S6NZGF | ROTARY SWITCH-7POSITIONS, SP7T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED |
| MC12L2NCGD | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.25A, 28VDC, THROUGH HOLE-STRAIGHT |
| MC12S3NZGF | ROTARY SWITCH-12POSITIONS, SP12T, LATCHED, 0.25A, 28VDC, PANEL MOUNT-THREADED |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC0402 | 制造商:RCD 制造商全称:RCD COMPONENTS INC. 功能描述:THICK FILM CHIP RESISTORS AND JUMPERS |
| MC0402-1000-FTW | 制造商:RCD Components Inc 功能描述:Res Thick Film 0402 100 Ohm 1% 1/16W ±200ppm/°C Molded SMD T/R |
| MC0402-1001-FTW | 制造商:RCD Components Inc 功能描述:Res Thick Film 0402 1K Ohm 1% 1/16W ±100ppm/°C Molded SMD T/R |
| MC0402-1002-FTW | 制造商:RCD Components Inc 功能描述:CHIP RES 0402 10.0K 1% T&R 制造商:RCD Components Inc 功能描述:Res Thick Film 0402 10K Ohm 1% 0.063W(1/16W) ±100ppm/°C Molded SMD T/R |
| MC0402-1003-FTW | 制造商:RCD Components Inc 功能描述:CHIP RES 0402 100K 1% T&R 制造商:RCD Components Inc 功能描述:Res Thick Film 0402 100K Ohm 1% 0.063W(1/16W) ±100ppm/°C Molded SMD T/R |
发布紧急采购，3分钟左右您将得到回复。