参数资料
| 型号： | MC14490PG |
| 厂商： | ON Semiconductor |
| 文件页数： | 9/11页 |
| 文件大小： | 0K |
| 描述： | IC ELIMINATOR BOUNCE HEX 16DIP |
| 标准包装： | 500 |
| 系列： | 4000 |
| 逻辑类型： | 触点回弹消除器 |
| 电源电压： | 3 V ~ 18 V |
| 位数： | 6 |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 16-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 16-DIP |
| 包装： | 管件 |
| 产品目录页面： | 1125 (CN2011-ZH PDF) |
| 其它名称： | MC14490PGOS |
MC14490
http://onsemi.com
7
TYPICAL APPLICATIONS
ASYMMETRICAL TIMING
In applications where different leading and trailing edge
delays are required (such as a fast attack/slow release timer.)
Clocks of different frequencies can be gated into the
MC14490 as shown in Figure 6. In order to produce a slow
attack/fast release circuit leads A and B should be
interchanged. The clock out lead can then be used to feed
clock signals to the other MC14490 packages where the
asymmetrical input/output timing is required.
Figure 6. Fast Attack/Slow Release Circuit
IN
OUT
OSCout
MC14011B
OSCin
AB
fC/N
EXTERNAL
CLOCK
÷ N
fC
MC14490
LATCHED OUTPUT
The contents of the Bounce Eliminator can be latched by
using several extra gates as shown in Figure 7. If the latch
lead is high the clock will be stopped when the output goes
low. This will hold the output low even though the input has
returned to the high state. Any time the clock is stopped the
outputs will be representative of the input signal four clock
periods earlier.
Figure 7. Latched Output Circuit
IN
OUT
OSCout
MC14011B
OSCin
MC14490
CLOCK
LATCH = 1
UNLATCH = 0
MULTIPLE TIMING SIGNALS
As shown in Figure 8, the Bounce Eliminator circuits can
be connected in series. In this configuration each output is
delayed by four clock periods relative to its respective input.
This configuration may be used to generate multiple timing
signals such as a delay line, for programming other timing
operations.
One application of the above is shown in Figure 9, where
it is required to have a single pulse output for a single
operation (make) of the push button or relay contact. This
only requires the series connection of two Bounce
Eliminator circuits, one inverter, and one NOR gate in order
to generate the signal AB as shown in Figures 9 and 10. The
signal AB is four clock periods in length. If the inverter is
switched to the A output, the pulse AB will be generated
upon release or break of the contact. With the use of a few
additional parts many different pulses and waveshapes may
be generated.
Figure 8. Multiple Timing Circuit Connections
10
5
12
3
14
1
79
6
11
4
13
2
15
Aout
Bout
Cout
Dout
Eout
Fout
OSCin
CLOCK
B.E. 6
B.E. 5
B.E. 4
B.E. 3
B.E. 2
B.E. 1
OSCout
Ain
Bin
Cin
Din
Ein
Fin
相关PDF资料 |
PDF描述 |
|---|---|
| MS3108A22-34S | CONN PLUG 5POS RT ANG W/SCKT |
| VE-25T-MX-F4 | CONVERTER MOD DC/DC 6.5V 75W |
| V72C12M150BL | CONVERTER MOD DC/DC 12V 150W |
| MS27656E13B98SB | CONN RCPT 10POS WALL MNT W/SCKT |
| MAX3095EPE | IC RCVR QUAD RS422/485 16-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC14499P | 制造商:Motorola Inc 功能描述: |
| MC145 | 制造商:ONS 功能描述:ON SEMICONDUCTOR S10L1J |
| MC14500BCP | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MC145010DW | 功能描述:IC SMOKE DETECT WITH I/O 16SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 传感器和探测器接口 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:74 系列:- 类型:触控式传感器 输入类型:数字 输出类型:数字 接口:JTAG，串行 电流 - 电源:100µA 安装类型:表面贴装 封装/外壳:20-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:20-TSSOP 包装:管件 |
| MC145010DWR2 | 制造商:Rochester Electronics LLC 功能描述:SMOKE DET, PHOTO WITH I/O - Bulk |
发布紧急采购，3分钟左右您将得到回复。