参数资料
型号: MC145572AAC
厂商: Freescale Semiconductor
文件页数: 19/52页
文件大小: 0K
描述: IC TRANSCEIVER ISDN 44-LQFP
标准包装: 160
类型: 收发器
规程: RS232
电源电压: 5V
安装类型: 表面贴装
封装/外壳: 44-LQFP
供应商设备封装: 44-LQFP(10x10)
包装: 托盘
27
MC145572EVK
Note that the M and the A bits used in the IDL interface of the MC145574 S/T-Interface Transceiver are
not used by the MC145572, and, therefore, are not driven by the MC145572.
NTFSR: (NT U-Interface Transceiver Pin FSR).
This pin is an input when the MC145572 is congured for slave mode and an output when congured for
master mode, as established by switch S4-1, MAS/SLV. In the master mode this output is phase locked
to the signal received at the NT1 U-Interface. This signal is associated with data output from the Dout pin
of the MC145572. This signal is also connected to the FSC/FSR pin of the MC145574 S/T-Transceiver.
NTFSX: (NT U-Interface Transceiver Pin FSX).
This pin is an input when the MC145572 is congured for slave mode and an output when congured for
master mode, as established by switch S2-1, MAS/SLV. In the master mode this output is phase locked
to the signal received at the NT1 U-Interface. This signal is associated with data input to the Din pin of the
MC145572.
STIRQ: Interrupt Request T (S/T-Interface Transceiver IRQ).
The STIRQ pin is an active low open drain output used to signal the MCU devices that an interrupt condition
exists in the MC145574 S/T-Interface Transceiver. On clearing the interrupt condition, the STIRQ pin is
returned to the high impedance state.
NTSFAX: Transmit Superframe Alignment.
This pin carries a signal that indicates the rst 2B+D frame in a U superframe to be transmitted onto the
U-Interface.This signal is not active when the NT side MC145572 is congured for full GCI mode operation.
NTSFAR: Receive Superframe Alignment.
This pin carries a signal that indicates the rst 2B+D frame in a U superframe to be received from the
U-Interface.This signal is not active when the NT side MC145572 is congured for full GCI mode operation.
NTFREF: Synchronized Clock Out, MCU Mode.
When the NT side MC145572 is congured for MCU mode operation, S4-4 in IDL2 position, this pin
provides the recovered timing clock. The frequency of the clock at this pin is selected by programming the
NT side MC145572 registers BR7(b4) and OR7(b4).
NTFREFO: Synchronized Clock Out, GCI Mode.
When the NT side MC145572 is congured for full GCI mode operation, S4-4 in GCI position, this pin
provides the recovered timing clock. The frequency of the clock is selected between 2.048 MHz and
512 kHz by the setting of S3-4, GCI2048/GCI512.
NTCLK or NTGTCLK: Gated IDL Clock Output.
This pin provides a gated clock output. The clock input of an external bit error rate tester should be
connected to this signal.
GND: Ground.
Negative Power Supply.
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.
相关PDF资料
PDF描述
MC14LC5480ENR2 IC CODEC-FILTER PCM 5V 20-SSOP
MC14LC5540DW IC CODEC ADPCM 28-SOIC W
MC33199DR2 IC DRVR SER INK ISO9141 14-SOIC
MC33215BE IC SPEAKERPHONE CIRCUIT 42-SDIP
MC33990DR2 IC TRANSCEIVER J-1850 BUS 8-SOIC
相关代理商/技术参数
参数描述
MC145572ACR2 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Freescale Semiconductor 功能描述:
MC145572AEI 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Freescale Semiconductor 功能描述:
MC145572AFN 功能描述:IC TRANSCEIVER ISDN 44-PLCC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
MC145572APB 功能描述:IC ISDN INTERFACE TXCVER 44-LQFP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
MC145572APBR2 制造商:Rochester Electronics LLC 功能描述:- Bulk