参数资料
型号: MC68HC05V7FNR2
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
封装: PLASTIC, LCC-68
文件页数: 121/170页
文件大小: 589K
代理商: MC68HC05V7FNR2
MOTOROLA
SECTION 6: RESETS
Page 40
MC68HC05V7 Specification Rev. 1.0
The RESET pin can also act as an open drain output. It will be pulled to a low state by an
internal pulldown that is activated by any reset source. This RESET pulldown device will
only be asserted for 3-4 cycles of the internal clock, PH2 (PH2 period = E clock period) or
as long as an internal reset source is asserted. When the external RESET pin is asserted,
the pulldown device will be turned on for only the 3-4 internal clock cycles.
6.2
INTERNAL RESETS
The five internally generated resets are the initial power-on reset function, the COP
Watchdog Timer reset, the illegal address detector, the low-voltage reset, and the disabled
STOP instruction. Termination of the external RESET input or the internal COP Watchdog
Timer are the only reset sources that can alter the operating mode of the MCU. The other
internal resets will not have any effect on the mode of operation when their reset state ends.
All internal resets will also assert (pull to logic zero) the external RESET pin for the duration
of the reset or 3-4 internal clock cycles, whichever is longer.
6.2.1
POWER-ON RESET (POR)
The internal POR is generated on power-up to allow the clock oscillator to stabilize. The
POR is strictly for power turn-on conditions and is not able to detect a drop in the power
supply voltage (brown-out). There is an oscillator stabilization delay of 4064 internal
processor bus clock cycles (PH2) after the oscillator becomes active.
The POR will generate the RST signal which will reset the CPU. If any other reset function
is active at the end of this 4064 cycle delay, the RST signal will remain in the reset condition
until the other reset condition(s) end.
POR will activate the RESET pin pulldown device connected to the pin. VDD must drop
below VPOR in order for the internal POR circuit to detect the next rise of VDD.
6.2.2
OPERATION IN STOP AND WAIT
If enabled, the LVR supply voltage sense option is active during STOP and WAIT. Any reset
source can bring the MCU out of STOP or WAIT modes.
相关PDF资料
PDF描述
MC68HC05V7FN 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQCC68
MC68HC05V7CB 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PDIP56
MC68HC05V7CFU 8-BIT, MROM, 2.1 MHz, MICROCONTROLLER, PQFP64
MC68HC05X16FU 8-BIT, MROM, MICROCONTROLLER, PQFP64
MC68HC705X32FU 8-BIT, OTPROM, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
MC68HC05X16 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X32 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor HCMOS) microcontroller unit
MC68HC05X4 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4CDW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05X4DW 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit