- 您现在的位置：买卖IC网 > PDF目录19388 > MC78M05BT (ON Semiconductor)IC REG LDO 5V .5A TO220AB PDF资料下载
参数资料
| 型号： | MC78M05BT |
| 厂商： | ON Semiconductor |
| 文件页数： | 9/15页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 5V .5A TO220AB |
| 产品变化通告： | LTB Notification 03/Jan/2008 |
| 标准包装： | 50 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 5V |
| 输入电压： | 最高 35V |
| 电压 - 压降（标准）： | 2V @ 350mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 500mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 通孔 |
| 封装/外壳： | TO-220-3 |
| 供应商设备封装： | TO-220AB |
| 包装： | 管件 |
| 其它名称： | MC78M05BTOS |
MC78M00, MC78M00A, NCV78M00 Series
APPLICATIONS INFORMATION
Design Considerations
The MC78M00/MC78M00A Series of fixed voltage
regulators are designed with Thermal Overload Protection
that shuts down the circuit when subjected to an excessive
power overload condition, Internal Short Circuit Protection
that limits the maximum current the circuit will pass, and
Output Transistor Safe ? Area Compensation that reduces the
output short circuit current as the voltage across the pass
transistor is increased.
In many low current applications, compensation
capacitors are not required. However, it is recommended
that the regulator input be bypassed with a capacitor if the
regulator is connected to the power supply filter with long
wire lengths, or if the output load capacitance is large. An
input bypass capacitor should be selected to provide good
high frequency characteristics to insure stable operation
under all load conditions. A 0.33 m F or larger tantalum,
mylar, or other capacitor having low internal impedance at
high frequencies should be chosen. The bypass capacitor
should be mounted with the shortest possible leads directly
across the regulator ’s input terminals. Normally good
construction techniques should be used to minimize ground
loops and lead resistance drops since the regulator has no
external sense lead.
Input
MC78M05C
V O , 7.0 V to 20 V
V in -V out ? 2.0 V
0.33 m F
I O
R
Constant
Current to
Grounded
Load
Input
MC78M05C
Output
The MC78M00 regulators can also be used as a current source
when connected as above. In order to minimize dissipation the
MC78M05C is chosen in this application. Resistor R determines
the current as follows:
0.33 m F
1.0 k
6
7
4
*
+
2
3
10 k
0.1 m F
I O =
5.0 V
R
+ I IB
MC1741
I IB = 1.5 mA over line and load changes.
The addition of an operational amplifier allows adjustment to higher
For example, a 500 mA current source would require R to be a
10 W , 10 W resistor and the output voltage compliance would be
the input voltage less 7.0 V.
Figure 10. Current Regulator
or intermediate values while retaining regulation characteristics.
The minimum voltage obtainable with this arrangement is 2.0 V
greater than the regulator voltage.
Figure 11. Adjustable Output Regulator
MJ2955
MJ2955 or Equiv.
Input
R SC
or Equiv.
Input
R
MC78MXXC
Output
2N6049
1.0 m F
1.0 m F
R
or Equiv.
1.0 m F
MC78MXXC
Output
XX = 2 digits of type number indicating voltage.
XX = 2 digits of type number indicating voltage.
The MC78M00 series can be current boosted with a PNP
transistor. The MJ2955 provides current to 5.0 A. Resistor R in
conjunction with the V BE of the PNP determines when the pass
transistor begins conducting; this circuit is not short circuit
proof. Input-output differential voltage minimum is increased
by V BE of the pass transistor.
Figure 12. Current Boost Regulator
The circuit of Figure 12 can be modified to provide supply protection
against short circuits by adding a short circuit sense resistor, R sc ,
and an additional PNP transistor. The current sensing PNP must be
able to handle the short circuit current of the three-terminal
regulator .Therefore, a 4.0 A plastic power transistor is specified.
Figure 13. Current Boost with
Short Circuit Protection
http://onsemi.com
9
相关PDF资料 |
PDF描述 |
|---|---|
| MC78L24ACP | IC REG LDO 24V .1A TO92 |
| TPSC226M016R0150 | CAP TANT 22UF 16V 20% 2312 |
| ADSP-BF537BBC-5A | IC DSP CTLR 16BIT 182CSPBGA |
| MC78L18ACP | IC REG LDO 18V .1A TO92 |
| TPSC107M010R0150 | CAP TANT 100UF 10V 20% 2312 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC78M05BT | 制造商:ON Semiconductor 功能描述:IC V REG +5.0V 78M05 TO-220-3 |
| MC78M05BTG | 功能描述:线性稳压器 - 标准 5V 500mA Positive RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L |
| MC78M05BTG | 制造商:ON Semiconductor 功能描述:Voltage Regulator IC Voltage Regulator T |
| MC78M05CDT | 功能描述:线性稳压器 - 标准 5V 500mA Positive RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L |
| MC78M05CDT-001 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
发布紧急采购，3分钟左右您将得到回复。