- 您现在的位置：买卖IC网 > PDF目录181333 > MC79L15ABP (ON SEMICONDUCTOR) 15 V FIXED NEGATIVE REGULATOR, PBCY3 PDF资料下载
参数资料
| 型号： | MC79L15ABP |
| 厂商： | ON SEMICONDUCTOR |
| 元件分类： | 固定负电压单路输出标准稳压器 |
| 英文描述： | 15 V FIXED NEGATIVE REGULATOR, PBCY3 |
| 封装： | TO-92, TO-226, 3 PIN |
| 文件页数： | 7/11页 |
| 文件大小： | 140K |
| 代理商： | MC79L15ABP |
MC79L00A Series
http://onsemi.com
5
APPLICATIONS INFORMATION
Design Considerations
The MC79L00A Series of fixed voltage regulators are
designed with Thermal Overload Protections that shuts
down the circuit when subjected to an excessive power
overload condition, Internal Short Circuit Protection that
limits the maximum current the circuit will pass.
In many low current applications, compensation
capacitors are not required. However, it is recommended
that the regulator input be bypassed with a capacitor if the
regulator is connected to the power supply filter with long
wire length, or if the output load capacitance is large. An
input bypass capacitor should be selected to provide good
highfrequency characteristics to insure stable operation
under all load conditions. A 0.33
mF or larger tantalum,
mylar, or other capacitor having low internal impedance at
high frequencies should be chosen. The bypass capacitor
should be mounted with the shortest possible leads directly
across the regulator’s input terminals. Normally good
construction techniques should be used to minimize ground
loops and lead resistance drops since the regulator has no
external sense lead. Bypassing the output is also
recommended.
Figure 2. Positive and Negative Regulator
Figure 3. Standard Application
+Vin
+VO
0.1
mF
-Vin
-VO
0.33
mF
MC78LXX
MC79LXX
0.1
mF
0.33
mF
Input
Output
CO**
0.1
mF
CI*
0.33
mF
MC79LXX
A common ground is required between the input and the output
voltages. The input voltage must remain typically 2.0 V above
the output voltage even during the low point on the ripple voltage.
* CI is required if regulator is located an appreciable
* distance from the power supply filter
** CO improves stability and transient response.
相关PDF资料 |
PDF描述 |
|---|---|
| MC79M08BBDT | 8 V FIXED NEGATIVE REGULATOR, PSSO2 |
| MC79M08BBDTRK | 8 V FIXED NEGATIVE REGULATOR, PSSO2 |
| MC79M08BCDT-1 | 8 V FIXED NEGATIVE REGULATOR, PSIP3 |
| MC79M08BBDT-1 | 8 V FIXED NEGATIVE REGULATOR, PSIP3 |
| MC79M08BBDT-1RK | 8 V FIXED NEGATIVE REGULATOR, PSIP3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC79L15ABPG | 功能描述:线性稳压器 - 标准 15V 100mA Negative RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L |
| MC79L15ABPRP | 功能描述:线性稳压器 - 标准 15V 100mA Negative RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L |
| MC79L15ABPRPG | 功能描述:线性稳压器 - 标准 15V 100mA Negative RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L |
| MC79L15AC | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:100 mA Negative Voltage Regulators |
| MC79L15ACD | 功能描述:线性稳压器 - 标准 15V 100mA Negative RoHS:否 制造商:STMicroelectronics 输出类型: 极性: 输出电压:1.8 V 输出电流:150 mA 负载调节: 最大输入电压:5.5 V 线路调整率: 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:SOT-323-5L |
发布紧急采购，3分钟左右您将得到回复。