参数资料
型号: MCF52100CVM80J
厂商: Freescale Semiconductor
文件页数: 55/56页
文件大小: 0K
描述: IC MCU 64K FLASH 80MHZ 81MAPBGA
标准包装: 240
系列: MCF521xx
核心处理器: Coldfire V2
芯体尺寸: 32-位
速度: 80MHz
连通性: I²C,SPI,UART/USART
外围设备: DMA,LVD,POR,PWM,WDT
输入/输出数: 56
程序存储器容量: 64KB(64K x 8)
程序存储器类型: 闪存
RAM 容量: 16K x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 3.6 V
数据转换器: A/D 8x12b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 81-LBGA
包装: 托盘
Family Configurations
MCF52110 ColdFire Microcontroller, Rev. 1
Freescale Semiconductor
8
— Unused peripheral pins may be used as extra GPIO
JTAG support for system level board testing
1.2.2
V2 Core Overview
The version 2 ColdFire processor core is comprised of two separate pipelines decoupled by an instruction buffer. The two-stage
instruction fetch pipeline (IFP) is responsible for instruction-address generation and instruction fetch. The instruction buffer is
a first-in-first-out (FIFO) buffer that holds prefetched instructions awaiting execution in the operand execution pipeline (OEP).
The OEP includes two pipeline stages. The first stage decodes instructions and selects operands (DSOC); the second stage
(AGEX) performs instruction execution and calculates operand effective addresses, if needed.
The V2 core implements the ColdFire instruction set architecture revision A+ with support for a separate user stack pointer
register and four new instructions to assist in bit processing. Additionally, the core includes the multiply-accumulate (MAC)
unit for improved signal processing capabilities. The MAC implements a three-stage arithmetic pipeline, optimized for 16x16
bit operations, with support for one 32-bit accumulator. Supported operands include 16- and 32-bit signed and unsigned
integers, signed fractional operands, and a complete set of instructions to process these data types. The MAC provides support
for execution of DSP operations within the context of a single processor at a minimal hardware cost.
1.2.3
Integrated Debug Module
The ColdFire processor core debug interface is provided to support system debugging with low-cost debug and emulator
development tools. Through a standard debug interface, access to debug information and real-time tracing capability is provided
on 100-lead packages. This allows the processor and system to be debugged at full speed without the need for costly in-circuit
emulators.
The on-chip breakpoint resources include a total of nine programmable 32-bit registers: an address and an address mask register,
a data and a data mask register, four PC registers, and one PC mask register. These registers can be accessed through the
dedicated debug serial communication channel or from the processor’s supervisor mode programming model. The breakpoint
registers can be configured to generate triggers by combining the address, data, and PC conditions in a variety of single- or
dual-level definitions. The trigger event can be programmed to generate a processor halt or initiate a debug interrupt exception.
This device implements revision B+ of the ColdFire Debug Architecture.
The processor’s interrupt servicing options during emulator mode allow real-time critical interrupt service routines to be
serviced while processing a debug interrupt event. This ensures the system continues to operate even during debugging.
To support program trace, the V2 debug module provides processor status (PST[3:0]) and debug data (DDATA[3:0]) ports.
These buses and the PSTCLK output provide execution status, captured operand data, and branch target addresses defining
processor activity at the CPU’s clock rate. The device includes a new debug signal, ALLPST. This signal is the logical AND of
the processor status (PST[3:0]) signals and is useful for detecting when the processor is in a halted state (PST[3:0] = 1111).
The full debug/trace interface is available only on the 100-pin packages. However, every product features the dedicated debug
serial communication channel (DSI, DSO, DSCLK) and the ALLPST signal.
1.2.4
JTAG
The processor supports circuit board test strategies based on the Test Technology Committee of IEEE and the Joint Test Action
Group (JTAG). The test logic includes a test access port (TAP) consisting of a 16-state controller, an instruction register, and
three test registers (a 1-bit bypass register, a 256-bit boundary-scan register, and a 32-bit ID register). The boundary scan register
links the device’s pins into one shift register. Test logic, implemented using static logic design, is independent of the device
system logic.
The device implementation can:
Perform boundary-scan operations to test circuit board electrical continuity
Sample system pins during operation and transparently shift out the result in the boundary scan register
相关PDF资料
PDF描述
S9S08SG16E1VTG MCU 16K FLASH 16-TSSOP
S9S08AW60E5CPUE MCU 60KB FLASH AUTO 64-LQFP
S9S08AW32E5CFGE MCU 32K FLASH AUTO 44-LQFP
PPC5606BCLU48 MCU 32BIT 1M 48MHZ
PPC5606BCLQ64 MCU 32BIT 1M 64MHZ
相关代理商/技术参数
参数描述
MCF5211 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:ColdFire Microcontroller
MCF52110 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:ColdFire Microcontroller
MCF52110CAE66 功能描述:32位微控制器 - MCU KIRIN0 WITHOUT USB RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT
MCF52110CAE80 功能描述:32位微控制器 - MCU KIRIN0 WITHOUT USB RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT
MCF52110CAF80 功能描述:32位微控制器 - MCU KIRIN0 WITHOUT USB RoHS:否 制造商:Texas Instruments 核心:C28x 处理器系列:TMS320F28x 数据总线宽度:32 bit 最大时钟频率:90 MHz 程序存储器大小:64 KB 数据 RAM 大小:26 KB 片上 ADC:Yes 工作电源电压:2.97 V to 3.63 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:LQFP-80 安装风格:SMD/SMT