- 您现在的位置：买卖IC网 > PDF目录1852 > MCP1631VHVT-330E/ST (Microchip Technology)IC REG CTRLR ISO PWM VM 20-TSSOP PDF资料下载
参数资料
| 型号： | MCP1631VHVT-330E/ST |
| 厂商： | Microchip Technology |
| 文件页数： | 17/34页 |
| 文件大小： | 0K |
| 描述： | IC REG CTRLR ISO PWM VM 20-TSSOP |
| 标准包装： | 1 |
| PWM 型： | 电压模式 |
| 输出数： | 1 |
| 频率 - 最大： | 2MHz |
| 占空比： | 10% |
| 电源电压： | 3.5 V ~ 16 V |
| 降压： | 是 |
| 升压： | 无 |
| 回扫： | 无 |
| 反相： | 无 |
| 倍增器： | 无 |
| 除法器： | 无 |
| Cuk： | 无 |
| 隔离： | 是 |
| 工作温度： | -40°C ~ 125°C |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 包装： | 标准包装 |
| 产品目录页面： | 668 (CN2011-ZH PDF) |
| 其它名称： | MCP1631VHVT-330E/STDKR |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页
MCP1631/HV/MCP1631V/VHV
4.0
DETAILED DESCRIPTION
4.4
Current Sense Amplifier (A2)
4.1
Device Overview
The A2 current sense amplifier is used to sense current
in the secondary side of a SEPIC converter or
The MCP1631/MCP1631V device family combines the
analog functions to develop high frequency switch
mode power systems while integrating features for
freewheeling current in a Buck converter. The inverting
amplifier has a built in voltage gain of ten with low offset
and high speed.
battery charger and LED current source applications.
With the integration of a MOSFET driver, voltage
4.5
Voltage Sense Amplifier (A3)
sense, current sense and over voltage protection, the
MCP1631/MCP1631V is a highly integrated, high-
speed analog pulse width modulator.
The MCP1631/MCP1631V output (V EXT ) is used to
control the switch of the power system (on and off
time). By controlling the switch on and off time, the
power system output can be regulated. With the
oscillator and reference voltage as inputs, a simple
interface to a microcontroller is available with the
MCP1631/MCP1631V to develop intelligent power
systems. A good example of an intelligent power
system is a battery charger, programmable LED driver
The A3 voltage sense amplifier is used to sense battery
voltage. In battery powered applications, it is important
to minimize the steady stage load current draw on the
battery. The voltage sense amplifier (A3) is used to
buffer a high impedance series divider used to reduce
the battery pack voltage to a level that can be read
using an analog to digital converter. The voltage sense
amplifier draws a very low quiescent current and
remains functional when the MCP1631/MCP1631V is
shutdown making it possible to read battery voltage
without turning on the charger.
current source or programmable power supply.
4.6
Overvoltage Comparator(C2)
The MCP1631/MCP1631V is a combination of
specialty analog blocks consisting of a Pulse Width
Modulator (PWM), MOSFET Driver, Current Sense
Amplifier (A2), Voltage Sense Amplifier (A3),
Overvoltage Comparator (C2) and additional features
(Shutdown, Undervoltage Lockout, Overtemperature
Protection). For the HV options, an internal low dropout
regulator is integrated for operation from high voltage
inputs (MCP1631HV/MCP1631VHV).
The C2 overvoltage comparator is used to prevent the
power system from being damaged when the load
(battery) is disconnected. By comparing the divided
down power train output voltage with a 1.2V internal
reference voltage, the MCP1631/MCP1631V V EXT
output switching is interrupted when the output voltage
is above a pre-set value. This limits the output voltage
of the power train, the 0V comparator ’s hysteresis will
operate as a ripple regulator.
4.2
Pulse Width Modulator (PWM)
4.7
Shutdown Input
The internal PWM of the MCP1631/MCP1631V is
comprised of an error amplifier, high-speed comparator
and latch. The output of the amplifier is compared to
either the MCP1631 CS (primary current sense input)
or the MCP1631V V RAMP (voltage mode ramp input) of
the high speed comparator. When the CS or VRAMP
The MCP1631/MCP1631V shutdown feature is used to
disable the device with the exception of the voltage
sense amplifier A3 to minimize quiescent current draw.
While shutdown, A3 remains operational while the
device draws 4.4 μA from the input.
signal reach the level of the error amplifier output, the
on cycle is terminated and the external switch is
4.8
Protection
latched off until the beginning of the next cycle (high to
low transition of OSC IN ).
4.3 V EXT MOSFET Driver
The MCP1631/MCP1631V output can be used to drive
the external MOSFET directly for low side topology
applications. The V EXT is capable of sourcing up to
700 mA and sinking up to 1A of current from a P VDD
source of 5V. Typical output power using the V EXT
output to directly drive the external MOSFET can
exceed 50W depending upon application and switching
frequency.
? 2008 Microchip Technology Inc.
The MCP1631/MCP1631V has built in Undervoltage
Lockout (UVLO) that ensures the output V EXT pin is
forced to a known state (low) when the input voltage or
A VDD is below the specified value. This prevents the
main MOSFET switch from being turned on during a
power up or down sequence.
The MCP1631/MCP1631V provides a thermal
shutdown protection feature, if the internal junction
temperature of the device becomes high, the
overtemperature protection feature will disable (pull the
V EXT output low) and shut down the power train.
DS22063B-page 17
相关PDF资料 |
PDF描述 |
|---|---|
| MCP16322T-ADJE/NG | IC REG BUCK SYNC ADJ 2A 16-VQFN |
| MCP16323T-500E/NG | IC REG BUCK SYNC 5V 3A 16-VQFN |
| MCP1640C-I/MC | IC REG BOOST SYNC ADJ 0.1A 8DFN |
| MCP1653ST-E/UN | IC REG CTRLR BST FLYBK CM 10MSOP |
| MCP1700-3002E/TO | IC REG LDO 3V .25A TO-92-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MCP1631VHVT-500E/ML | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:High-Speed, Pulse Width Modulator |
| MCP1631VHVT-500E/SS | 功能描述:开关变换器、稳压器与控制器 Hi Vltg Integ HS PWM V Mode RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
| MCP1631VHVT-500E/ST | 功能描述:开关变换器、稳压器与控制器 Hi Vltg Integ HS PWM V Mode RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
| MCP1631VHVT-E/ML | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:High-Speed, Pulse Width Modulator |
| MCP1631VHVT-E/SS | 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:High-Speed, Pulse Width Modulator |
发布紧急采购，3分钟左右您将得到回复。