参数资料
型号: MCP2200T-I/MQ
厂商: Microchip Technology
文件页数: 27/34页
文件大小: 0K
描述: IC USB 2.0 - UART 20QFN
标准包装: 3,300
特点: USB 至 UART
通道数: 8
FIFO's: 256 字节
规程: USB 2.0
电源电压: 3 V ~ 5.5 V
带自动流量控制功能:
安装类型: 表面贴装
封装/外壳: 20-VQFN 裸露焊盘
供应商设备封装: 20-VQFN
包装: 带卷 (TR)
2009 Microchip Technology Inc.
DS41288F-page 33
PIC16F610/616/16HV610/616
4.0
I/O PORTS
There are as many as eleven general purpose I/O pins
and an input pin available. Depending on which
peripherals are enabled, some or all of the pins may not
be available as general purpose I/O. In general, when a
peripheral is enabled, the associated pin may not be
used as a general purpose I/O pin.
4.1
PORTA and the TRISA Registers
PORTA is a 6-bit wide, bidirectional port. The
corresponding
data
direction
register
is
TRISA
(Register 4-2). Setting a TRISA bit (= 1) will make the
corresponding PORTA pin an input (i.e., disable the
output driver). Clearing a TRISA bit (= 0) will make the
corresponding PORTA pin an output (i.e., enables output
driver and puts the contents of the output latch on the
selected pin). The exception is RA3, which is input only
and its TRIS bit will always read as ‘1’. Example 4-1
shows how to initialize PORTA.
Reading the PORTA register (Register 4-1) reads the
status of the pins, whereas writing to it will write to the
PORT latch. All write operations are read-modify-write
operations. Therefore, a write to a port implies that the
port pins are read, this value is modified and then
written to the PORT data latch. RA3 reads ‘0’ when
MCLRE = 1.
The TRISA register controls the direction of the
PORTA pins, even when they are being used as
analog inputs. The user must ensure the bits in the
TRISA register are maintained set when using them as
analog inputs. I/O pins configured as analog input
always read ‘0’.
EXAMPLE 4-1:
INITIALIZING PORTA
Note:
The ANSEL register must be initialized to
configure an analog channel as a digital
input. Pins configured as analog inputs will
read ‘0’ and cannot generate an interrupt.
BCF
STATUS,RP0
;Bank 0
CLRF
PORTA
;Init PORTA
BSF
STATUS,RP0
;Bank 1
CLRF
ANSEL
;digital I/O
MOVLW
0Ch
;Set RA<3:2> as inputs
MOVWF
TRISA
;and set RA<5:4,1:0>
;as outputs
BCF
STATUS,RP0
;Bank 0
REGISTER 4-1:
PORTA: PORTA REGISTER
U-0
R/W-x
R/W-0
R-x
R/W-0
RA5
RA4
RA3
RA2
RA1
RA0
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
RA<5:0>: PORTA I/O Pin bit
1
= PORTA pin is > VIH
0
= PORTA pin is < VIL
REGISTER 4-2:
TRISA: PORTA TRI-STATE REGISTER
U-0
R/W-1
R-1
R/W-1
TRISA5
TRISA4
TRISA3
TRISA2
TRISA1
TRISA0
bit 7
bit 0
Legend:
R = Readable bit
W = Writable bit
U = Unimplemented bit, read as ‘0’
-n = Value at POR
‘1’ = Bit is set
‘0’ = Bit is cleared
x = Bit is unknown
bit 7-6
Unimplemented: Read as ‘0’
bit 5-0
TRISA<5:0>: PORTA Tri-State Control bit
1
= PORTA pin configured as an input (tri-stated)
0
= PORTA pin configured as an output
Note
1:
TRISA<3> always reads ‘1’.
2:
TRISA<5:4> always reads ‘1’ in XT, HS and LP Oscillator modes.
相关PDF资料
PDF描述
MCP2210T-I/MQ IC CONVERTER USB-PCI 20-QFN
MCP23008-E/ML IC I/O EXPANDER I2C 8B 20QFN
MCP23016T-I/ML IC I/O EXPANDER I2C 16B 28QFN
MCP23018T-E/SS IC I/O EXPANDER I2C 16B 24SSOP
MCP23S09-E/P IC I/O EXPANDER SPI 8B 18DIP
相关代理商/技术参数
参数描述
MCP2200T-ISO 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:USB 2.0 to UART Protocol Converter with GPIO
MCP2200T-ISS 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:USB 2.0 to UART Protocol Converter with GPIO
MCP-220-51202-0N 制造商:SUPER MICRO COMPUTER, INC. 功能描述:DVD KIT - Bulk
MCP-220-73201-0N 制造商:Supermicro Computer Inc 功能描述:SC732 2.5INCH HDD CAGE - Bulk
MCP-220-81502-0N 制造商:Supermicro Computer Inc 功能描述:Slim SATA DVD Kit 制造商:Supermicro Computer Inc 功能描述:SLIM SATA DVD KIT - Bulk 制造商:Supermicro Computer 功能描述: 制造商:Supermicro Computer 功能描述:Slim SATA DVD Kit