参数资料
型号: MCP3304T-BI/SL
厂商: Microchip Technology
文件页数: 13/48页
文件大小: 0K
描述: IC ADC 13BIT 2.7V 4CH SPI 16SOIC
标准包装: 2,600
位数: 13
采样率(每秒): 100k
数据接口: 串行,SPI?
转换器数目: 1
电压电源: 单电源
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-SOIC(0.154",3.90mm 宽)
供应商设备封装: 16-SOIC
包装: 带卷 (TR)
输入数目和类型: 8 个单端,单极;4 个差分,单极
其它名称: MCP3304TBI/SL
MCP3302/04
DS21697F-page 20
2011 Microchip Technology Inc.
5.5
Buffering/Filtering the Analog
Inputs
Inaccurate conversion results may occur if the signal
source for the A/D converter is not a low-impedance
source. Buffering the input will overcome the
impedance issue. It is also recommended that an
analog filter be used to eliminate any signals that may
be aliased back into the conversion results. This is
illustrated in Figure 5-9, where an op amp is used to
drive the analog input of the MCP3302/04. This
amplifier provides a low-impedance source for the
converter input and a low-pass filter, which eliminates
unwanted high-frequency noise. Values shown are for
a 10 Hz Butterworth Low-Pass filter.
Low-pass (anti-aliasing) filters can be designed using
Microchip’s interactive FilterLab software. FilterLab
will calculate capacitor and resistor values, as well as
determine the number of poles that are required for the
application. For more detailed information on filtering
signals, see AN699 “Anti-Aliasing, Analog Filters for
Data Acquisition Systems”
, at www.microchip.com.
FIGURE 5-9:
The MCP601 Operational
Amplifier is used to implement a 2nd order anti-
aliasing filter for the signal being converted by
the MCP3302/04.
5.6
Layout Considerations
When laying out a printed circuit board for use with
analog components, care should be taken to reduce
noise wherever possible. A bypass capacitor from VDD
to ground should always be used with this device and
should be placed as close as possible to the device pin.
A bypass capacitor value of 0.1 F is recommended.
Digital and analog traces on the board should be
separated as much as possible, with no traces running
underneath the device or the bypass capacitor. Extra
precautions should be taken to keep traces with high-
frequency signals (such as clock lines) as far as
possible from analog traces.
Use of an analog ground plane is recommended in
order to keep the ground potential the same for all
devices on the board. Providing VDD connections to
devices in a “star” configuration can also reduce noise
by eliminating current return paths and associated
errors (see Figure 5-10). Layout tips for using the
MCP3302, MCP3304, or other ADC devices, are avail-
able in AN688, “Layout Tips for 12-Bit A/D Converter
Applications”
, from www.microchip.com.
FIGURE 5-10:
VDD traces arranged in a
‘Star’ configuration in order to reduce errors
caused by current return paths.
MCP330X
VDD
10 F
IN-
IN+
-
+
VIN
2.2 F
1F
VREF
4.096V
Reference
0.1 F
1F
0.1 F
MCP601
7.86 k
14.6 k
MCP1541
CL
VDD
Connection
Device 1
Device 2
Device 3
Device 4
相关PDF资料
PDF描述
VE-B5T-IV-F2 CONVERTER MOD DC/DC 6.5V 150W
ULN2803ADWG4 IC DUAL TRANS ARRAY HV 18-SOIC
VI-25M-IU CONVERTER MOD DC/DC 10V 200W
VI-252-IU CONVERTER MOD DC/DC 15V 200W
MAX9713ETJ+ IC AMP AUDIO PWR 8W MONO 32TQFN
相关代理商/技术参数
参数描述
MCP3304T-CI/P 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:13-Bit Differential Input, Low Power A/D Converter with SPI Serial Interface
MCP3304T-CI/SL 功能描述:模数转换器 - ADC 13-bit Diff In 4 Chl RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32
MCP3304T-CI/ST 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:13-Bit Differential Input, Low Power A/D Converter with SPI Serial Interface
MCP3304TI/P 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:13-Bit Differential Input, Low Power A/D Converter with SPI Serial Interface
MCP3304T-I/P 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:13-Bit Differential Input, Low Power A/D Converter with SPI Serial Interface