参数资料
型号: MCP6023T-E/ST
厂商: Microchip Technology
文件页数: 11/42页
文件大小: 0K
描述: IC OPAMP SNGL 2.5V 10MHZ 8TSSOP
标准包装: 2,500
放大器类型: 通用
电路数: 1
输出类型: 满摆幅
转换速率: 7 V/µs
增益带宽积: 10MHz
电流 - 输入偏压: 1pA
电压 - 输入偏移: 500µV
电流 - 电源: 1mA
电流 - 输出 / 通道: 30mA
电压 - 电源,单路/双路(±): 2.5 V ~ 5.5 V
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 8-TSSOP(0.173",4.40mm 宽)
供应商设备封装: 8-TSSOP
包装: 带卷 (TR)
2009 Microchip Technology Inc.
DS21685D-page 19
MCP6021/1R/2/3/4
4.6
MCP6021 and MCP6023 Reference
Voltage
The single op amps (MCP6021 and MCP6023), not in
the SOT-23-5 package, have an internal mid-supply
reference voltage connected to the VREF pin (see
Figure 4-7). The MCP6021 has CS internally tied to
VSS, which always keeps the op amp on and always
provides a mid-supply reference. With the MCP6023,
taking the CS pin high conserves power by shutting
down both the op amp and the VREF circuitry. Taking
the CS pin low turns on the op amp and VREF circuitry.
FIGURE 4-7:
Simplified internal VREF
circuit (MCP6021 and MCP6023 only).
See Figure 4-8 for a non-inverting gain circuit using the
internal
mid-supply
reference.
The
DC-blocking
capacitor (CB) also reduces noise by coupling the op
amp input to the source.
FIGURE 4-8:
Non-inverting gain circuit
using VREF (MCP6021 and MCP6023 only).
To use the internal mid-supply reference for an
inverting gain circuit, connect the VREF pin to the
non-inverting input, as shown in Figure 4-9. The
capacitor CB helps reduce power supply noise on the
output.
FIGURE 4-9:
Inverting gain circuit using
VREF (MCP6021 and MCP6023 only).
If you don’t need the mid-supply reference, leave the
VREF pin open.
4.7
Supply Bypass
With this family of operational amplifiers, the power
supply pin (VDD for single supply) should have a local
bypass capacitor (i.e., 0.01 F to 0.1 F) within 2 mm
for good, high-frequency performance. It also needs a
bulk capacitor (i.e., 1 F or larger) within 100 mm to
provide large, slow currents. This bulk capacitor can be
shared with nearby analog parts.
4.8
Unused Op Amps
An unused op amp in a quad package (MCP6024)
should be configured as shown in Figure 4-10. These
circuits prevent the output from toggling and causing
crosstalk. Circuits A sets the op amp at its minimum
noise gain. The resistor divider produces any desired
reference voltage within the output voltage range of the
op amp; the op amp buffers that reference voltage.
Circuit B uses the minimum number of components
and operates as a comparator, but it may draw more
current.
FIGURE 4-10:
Unused Op Amps.
VDD
VSS
VREF
CS
50 k
Ω
50 k
Ω
(CS tied internally to VSS for MCP6021)
5M
Ω
VIN
RG
RF
VOUT
CB
VREF
VIN
RG
RF
VOUT
VREF
CB
VDD
MCP6024 (A)
MCP6024 (B)
R1
R2
VDD
VREF
V
REF
V
DD
R
2
R
1
R
2
+
-------------------
×
=
相关PDF资料
PDF描述
MCP6031-E/MS IC OPAMP SNGL 1.8V 8MSOP
MCP608T-I/ST IC OPAMP 2.5V R-R W/CS 8TSSOP
MCP6232-E/SN IC OPAMP 1.8V DUAL R-R 8SOIC
MCP629T-E/ML IC OPAMP GP RR 20MHZ W/CS 16QFN
MCP639-E/ML IC OP AMP QUAD 24MHZ 16-QFN
相关代理商/技术参数
参数描述
MCP6023T-I/MS 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:Rail-to-Rail Input/Output, 10 MHz Op Amps
MCP6023T-I/OT 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:Rail-to-Rail Input/Output, 10 MHz Op Amps
MCP6023T-I/P 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:Rail-to-Rail Input/Output, 10 MHz Op Amps
MCP6023T-I/SL 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:Rail-to-Rail Input/Output, 10 MHz Op Amps
MCP6023T-I/SN 功能描述:运算放大器 - 运放 Single 2.5V 10MHz RoHS:否 制造商:STMicroelectronics 通道数量:4 共模抑制比(最小值):63 dB 输入补偿电压:1 mV 输入偏流(最大值):10 pA 工作电源电压:2.7 V to 5.5 V 安装风格:SMD/SMT 封装 / 箱体:QFN-16 转换速度:0.89 V/us 关闭:No 输出电流:55 mA 最大工作温度:+ 125 C 封装:Reel