- 您现在的位置：买卖IC网 > PDF目录19623 > MER1S0509SC (Murata Power Solutions Inc)CONV DC/DC 1KVDC TH 1W 5-9V PDF资料下载
参数资料
| 型号： | MER1S0509SC |
| 厂商： | Murata Power Solutions Inc |
| 文件页数： | 5/7页 |
| 文件大小： | 0K |
| 描述： | CONV DC/DC 1KVDC TH 1W 5-9V |
| 产品培训模块： | Low Power DC/DC Converters <5W |
| 产品目录绘图： | MER1, MEV(1,3) Series |
| 特色产品： | MER1 Series DC/DC Converters |
| 标准包装： | 25 |
| 系列： | MER1 |
| 类型： | 隔离 |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 4.5V |
| 电压 - 输入（最大）： | 5.5V |
| Voltage - Output 1： | 9V |
| 电流 - 输出（最大）： | 111mA |
| 电源（瓦） - 制造商系列： | 1W |
| 电压 - 隔离： | 1kV（1000V） |
| 安装类型： | 通孔 |
| 封装/外壳： | 7-SIP 模块（4 引线） |
| 尺寸/尺寸： | 0.77" L x 0.24" W x 0.40" H（19.7mm x 6.2mm x 10.2mm） |
| 包装： | 管件 |
| 工作温度： | -40°C ~ 85°C |
| 效率： | 87% |
| 电源（瓦特）- 最大： | 1W |
| 产品目录页面： | 2716 (CN2011-ZH PDF) |
| 其它名称： | 811-2125-5 |
MER1 Series
1kVDC Isolated 1W Single Output DC/DC Converters
TECHNICAL NOTES
ISOLATION VOLTAGE
‘Hi Pot Test’, ‘Flash Tested’, ‘Withstand Voltage’, ‘Proof Voltage’, ‘Dielectric Withstand Voltage’ & ‘Isolation Test Voltage’ are all terms that relate to the same thing, a test voltage,
applied for a speci?ed time, across a component designed to provide electrical isolation, to verify the integrity of that isolation.
Murata Power Solutions MER1 series of DC/DC converters are all 100% production tested at their stated isolation voltage. This is 1kVDC for 1 second.
A question commonly asked is, “What is the continuous voltage that can be applied across the part in normal operation?”
The MER1 has been recognized by Underwriters Laboratory for functional insulation, both input and output should normally be maintained within SELV limits i.e. less than 42.4V
peak, or 60VDC. The isolation test voltage represents a measure of immunity to transient voltages and the part should never be used as an element of a safety isolation system.
The part could be expected to function correctly with several hundred volts offset applied continuously across the isolation barrier; but then the circuitry on both sides of the barrier
must be regarded as operating at an unsafe voltage and further isolation/insulation systems must form a barrier between these circuits and any user-accessible circuitry according
to safety standard requirements.
REPEATED HIGH-VOLTAGE ISOLATION TESTING
It is well known that repeated high-voltage isolation testing of a barrier component can actually degrade isolation capability, to a lesser or greater degree depending on materials,
construction and environment. The MER1 series has toroidal isolation transformers, with no additional insulation between primary and secondary windings of enameled wire. While
parts can be expected to withstand several times the stated test voltage, the isolation capability does depend on the wire insulation. Any material, including this enamel (typically
polyurethane) is susceptible to eventual chemical degradation when subject to very high applied voltages thus implying that the number of tests should be strictly limited. We
therefore strongly advise against repeated high voltage isolation testing, but if it is absolutely required, that the voltage be reduced by 20% from speci?ed test voltage.
This consideration equally applies to agency recognized parts rated for better than functional isolation where the wire enamel insulation is always supplemented by a further
insulation system of physical spacing or barriers.
SAFETY APPROVAL
The MER1 series has been recognized by Underwriters Laboratory (UL) to UL 60950 for functional insulation in a maximum ambient temperature of 85°C and/or case temperature
limit of 130°C (case temperature measured on the face opposite the pins). File number E151252 applies.
The MER1 Series of converters are not internally fused so to meet the requirements of UL 60950 an anti-surge input line fuse should always be used with ratings as de?ned below.
MER1S05xxSC: 1A
MER1S12xxSC: 0.375A
MER1S15xxSC: 0.375A
MER1S24xxSC: 0.2A
MER1S48xxSC: 0.1A
All fuses should be UL approved and rated to at least the maximum allowable DC input voltage.
www.murata-ps.com/support
KDC_MER1.B05 Page 5 of 7
相关PDF资料 |
PDF描述 |
|---|---|
| R2D12-2424/HP | CONV DC/DC 2W +/-24VOUT SMD |
| TAJS685M010RNJ | CAP TANT 6.8UF 10V 20% 1206 |
| FMC13DRYI | CONN EDGECARD 26POS DIP .100 SLD |
| M5LV-384/160-12YC | IC CPLD 384MC 160I/O 208PQFP |
| HBM02DRYN | CONN EDGECARD 4POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MER1S0509SC | 制造商:Murata Power Solutions 功能描述:DC/DC CONVERTER |
| MER1S0512SC | 功能描述:DC/DC转换器 1W 5Vin 12Vout 84mA 1kVDC Isolated SIP RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| MER1S0512SC | 制造商:Murata Power Solutions 功能描述:DC/DC CONVERTER |
| MER1S0515SC | 功能描述:DC/DC转换器 1W 5Vin 15Vout 67mA 1kVDC Isolated SIP RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压（标称）: 输出端数量:1 输出电压（通道 1）:3.3 V 输出电流（通道 1）:600 mA 输出电压（通道 2）: 输出电流（通道 2）: 安装风格:SMD/SMT 封装 / 箱体尺寸: |
| MER1S0515SC | 制造商:Murata Power Solutions 功能描述:DC/DC CONVERTER |
发布紧急采购，3分钟左右您将得到回复。