- 您现在的位置：买卖IC网 > PDF目录371098 > MF0064M-07ATXX (Mitsubishi Electric Corporation) 8/16-bit Data Bus Flash ATA PC Card PDF资料下载
参数资料
| 型号： | MF0064M-07ATXX |
| 厂商： | Mitsubishi Electric Corporation |
| 英文描述： | 8/16-bit Data Bus Flash ATA PC Card |
| 中文描述： | 16位产品数据总线闪存阿拉木图PC卡 |
| 文件页数： | 15/31页 |
| 文件大小： | 222K |
| 代理商： | MF0064M-07ATXX |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页
MITSUBISHI STORAGE CARD
MF0XXXX-07BTXX / -07BFXX series
ATA PC CARDS
Jun.2000
. Rev. 1.0
MITSUBISHI
ELECTRIC
15/31
ATA Register Specifications
Data Register
This register is a 16 bit register which is used to transfer
data blocks between the card data buffer and the host.
Data may be transferred by either a series of word
accesses to the Data register or a series of byte accesses
to the Data register.
D15
D14
D13
D12
Data Word
Odd Data Byte
D11
D10
D9
D8
D7
D6
D5
D4
Data Word
Data Byte
D3
D2
D1
D0
Error Register
This register contains additional information about the
source of an error which has occurred in processing of the
preceding command. This register should be checked by
the host when ERR bit in the Status register is set. The
Error register is a read only register.
D7
BBK
D6
UNC
D5
0
D4
IDNF
D3
0
D2
D1
0
D0
AMN
F
ABRT
Field
BBK
function
This bit is set when a Bad Block is detected in requested
ID field. Host can not read/write on data area that is
marked as a Bad Block.
This bit is set when Uncorrectable error is occurred at
reading the card.
The requested sector ID is in error or cannot be found.
This bit is set if the command has been aborted because
of the card status condition. (Not ready, Write fault, etc.) or
when an invalid command has been issued.
This bit is set in case of a general error.
UNC
IDNF
ABRT
AMNF
Feature Register
This register is written by the host to provide command
specific information to the drive regarding features of the
drive which the host wish to utilize. The Feature register
is a write only register.
D7
D6
D5
D4
Feature byte
D3
D2
D1
D0
Sector Count Register
This register is written by the host with the number of
sectors or blocks to be processed in the subsequent
command. After the command is complete, the host may
read this register to obtain the count of sectors left
unprocessed by the command.
D7
D6
D5
D4
Sector Count
D3
D2
D1
D0
Sector Number Register
This register is written by the host with the starting
sector number to be used in the subsequent Cylinder-
Head-Sector command. After the command is complete,
the host may read the final sector number from this
register. When logical block addressing is used, this
register is written by the host with bit7 to 0 of the
starting logical block number and contains bit7 to 0 of
the final logical block number after the command is
complete.
D7
D6
D5
D4
D3
D2
D1
D0
Sector Number
Logical Block Number bits A07-A00(LBA Addressing)
Cylinder Low Register
This register is written by the host with the low-order
byte of the starting cylinder address to be used in the
subsequent Cylinder-Head-Sector command. After the
command is complete, the host may read the low-order
byte of the final cylinder number from this register.
When logical block addressing is used, this register is
written by the host with bits15 to 8 of the starting logical
block number and contains bits15 to 8 of the final logical
block number after the command complete.
D7
D6
D5
D4
D3
D2
D1
D0
Cylinder Low Byte
Logical Block Number bits A15-A08(LBA Addressing)
Cylinder High Register
This register is written by the host with the high-order
byte of the starting cylinder address to be used in the
subsequent Cylinder-Head-Sector command. After the
command is complete, the host may read the high-order
byte of the final cylinder number from this register.
When logical block addressing is used, this register is
written by the host with bits 23 to 16 of the starting
logical block number and contains bits23 to 16 of the
final logical block number after the command is
complete.
D7
D6
D5
D4
D3
D2
D1
D0
Cylinder High Byte
Logical Block Number bits A23-A16(LBA Addressing)
相关PDF资料 |
PDF描述 |
|---|---|
| MF0256M-07ATxx | 8/16-bit Data Bus Flash ATA PC Card |
| MF1037S-1 | FOR PERSONAL HANDYPHONE SYSTEM |
| MF1037S-2 | DIODE ZENER SINGLE 300mW 16Vz 5mA-Izt 0.0556 0.1uA-Ir 11.2 SOT-23 3K/REEL |
| MF1050V-2 | FOR DIGITAL MOBILE TELEPHONE, Rx |
| MF1050V-4 | FOR DIGITAL MOBILE TELEPHONE, Rx |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MF0064M-07BTXX | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:8/16-bit Data Bus Flash ATA PC Card |
| MF0064M-11ATXX | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:8/16-bit Data Bus Flash ATA PC Card |
| MF0075M-03ATXX | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:null8/16-bit Data Bus Flash ATA PC Card |
| MF007M5-03ATXX | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:null8/16-bit Data Bus Flash ATA PC Card |
| MF0090M-03ATXX | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:null8/16-bit Data Bus Flash ATA PC Card |
发布紧急采购，3分钟左右您将得到回复。