- 您现在的位置：买卖IC网 > PDF目录19011 > MG-200-B-MD-R (SSI Technologies Inc)SENSOR 200 PSI 4-20 MA 1/8 NPT PDF资料下载
参数资料
| 型号： | MG-200-B-MD-R |
| 厂商： | SSI Technologies Inc |
| 文件页数： | 5/10页 |
| 文件大小： | 0K |
| 描述： | SENSOR 200 PSI 4-20 MA 1/8 NPT |
| 产品培训模块： | P51 Pressure Measurement Overview |
| 标准包装： | 1 |
| 系列： | MG-MD |
| 压力类型： | 压力计 |
| 工作压力： | 200 PSI |
| 端口尺寸： | 公型，1/8"（3.175mm）NPT |
| 输出： | LCD 显示器 |
| 精确度： | ±0.25% |
| 电源电压： | 12V |
| 工作温度： | -10°C ~ 60°C |
| 封装/外壳： | 不锈钢 |
| 其它名称： | MG-200-B-MD MG-200-B-MD-ND |
SSI Technologies – Application Note PS-AN7
MediaGauge? (Model MG-MD) Digital Pressure Gauge
Product Overview
To set the High or Low pressure set points: Press and hold
down the UNIT/SET button for 3 seconds. The
MediaGauge? MG-MD will go into the pressure setting
mode.
Electrical Interface
MediaGauge? MG-MD harness connections:
1) The screen shows
on the top, left hand side
White wire:
Power Lead for supply input (12 Vdc)
indicating high pressure setting, and the first digit
will be flashing.
Black wire:
Return Lead
2) Set the first digit value by pressing the
(select from 0 to 9). Then press the
Button
Button,
Brown wire:
Limit Switch output (NPN Transistor output)
which shifts to the second digit. Again use the
Blue Wire:
4-20 mA output for meter. (Must be loop
Button to select 0 thru 9 followed by the
to complete the third and forth digits.
Button
grounded with black wire)
3) After all 4 digits of the high pressure settings are
done press the
screen will show
Button one more time, the
on the top, left hand side
Typical Wiring Interface
indicating low pressure setting. Repeat steps 1 and
2 above to set the 4 digits of the low pressure
settings.
4) After all 4 digits of the low pressure settings are
done press the Button one more time, the
screen will show “Load”, indicating your pressure
settings have been saved into memory.
This is a description of an application to interface the
MediaGauge? MG-MD to a monitoring and control system
utilizing the limit switch output to control a relay and monitor
the output current. The relay will turn on and off based
upon the high and low pressure set points the user
programs into the MediaGauge? MG-MD digital pressure
gauge.
5) To make sure that the settings are correct, you can
press the
Button to check the value of the low
1) Mount the MediaGauge? MG-MD digital pressure
pressure setting and press the Button to check
the value of the high pressure setting.
gauge on a suitable (1/4” NPT) female fitting. Use
Teflon tape or pipe dope to seal the threads. . Do
not over tighten. Torque to 150 in lbs +/- 1 in lb.
2) Connect the supplied mating harness with Din
connector to the mating connector on the back of
the MediaGauge? MG-MD digital pressure gauge.
3) Program the MediaGauge? digital pressure gauge
with your low and high pressure set points per the
instructions described previously.
SSI TECHNOLOGIES, INC.
Controls Division
2643 West Court Street
Janesville, WI 53548-5011
Phone: (608)758-1500
Fax: (608)758-2491
Copyright January 30, 2009
SSI Technologies Inc.
All Rights Reserved
Revision 4
www.ssitechnologies.com
5
RoHS
相关PDF资料 |
PDF描述 |
|---|---|
| MG-100-B-MD-R | SENSOR 100 PSI 4-20 MA 1/8 NPT |
| SM2850L | LAMP T-1.5 TELE SLIDE 28V .08A |
| KC2520C38.4000C1LE00 | OSCILLATOR 38.4000MHZ SMD |
| MPL115A2 | IC BAROMETER I2C DGTL MINI 8LGA |
| MPL115A1 | IC BAROMETER SPI DGTL MINI 8LGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MG200F6ES61 | 制造商:POWEREX 制造商全称:Powerex Power Semiconductors 功能描述:Six IGBTMOD⑩ Compact IGBT Series Module 200 Amperes/600 Volts |
| MG200H1AL2 | 制造商:TOSHIBA 制造商全称:Toshiba Semiconductor 功能描述:(DISCRETE/OPTO) |
| MG200H1FL1 | 制造商:Toshiba America Electronic Components 功能描述: |
| MG200J2YS1 | 制造商:n/a 功能描述:IGBT Module |
| MG200J2YS11 | 制造商:n/a 功能描述:IGBT Module |
发布紧急采购，3分钟左右您将得到回复。