- 您现在的位置：买卖IC网 > PDF目录19013 > MG-75-A-9V-R (SSI Technologies Inc)SENSOR DIGITAL GAUGE 75PSI LCD PDF资料下载
参数资料
| 型号： | MG-75-A-9V-R |
| 厂商： | SSI Technologies Inc |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | SENSOR DIGITAL GAUGE 75PSI LCD |
| 产品培训模块： | Digital Pressure Gauges P51 Pressure Measurement Overview |
| 产品目录绘图： | MG(1,A) Series Side 1 MG(1,A) Series Side 2 |
| 特色产品： | SSI Technologies Inc. MediaGauge? Digital Pressure Gauges |
| 标准包装： | 1 |
| 系列： | MG-9V |
| 压力类型： | 压力计 |
| 工作压力： | 75 PSI |
| 端口尺寸： | 公型，1/4"（6.35mm）NPT |
| 输出： | LCD 显示器 |
| 精确度： | ±0.25% |
| 电源电压： | 9V |
| 工作温度： | -10°C ~ 60°C |
| 封装/外壳： | 不锈钢 |
| 其它名称： | 734-1123 |
SSI Technologies – Application Note PS-AN4
MediaGauge? (Model MG-9V) Digital Pressure Gauge
Product Overview
MediaGauge? MG-9V Panel Operation
The MediaGauge? MG-9V panel has a LCD display and
three multi-functional buttons – ON/UNIT/OFF ;
Backlight/P-H (Peak-Held) and RESET/CLEAR .
The Backlight/P-H (Peak-Held) button is used to turn
the LCD backlight on/off and to display the maximum peak
pressure the unit has measured.
To turn the LCD backlight on : Press the Backlight/P-H
button once. To turn the LCD backlight off: Press the button
again.
To see the maximum peak pressure the unit has measured:
Press and hold down the Backlight/P-H button for 3
seconds. The maximum pressure reading will be blinking.
If the maximum pressure read was over the unit’s maximum
pressure range, o.L will be blinking on the display.
To return to the current pressure reading:
Press the
Backlight/P-H button and hold down for 3 seconds.
The RESET/CLEAR button is used to reset the gauge to
whatever pressure is currently applied to the port and to
clear the stored maximum peak pressure reading.
The ON/UNIT/OFF button is used to display the
pressure reading; switch between pressure units (PSI; BAR;
and MPA) and to power down the unit.
To power on the unit: Press the ON/UNIT/OFF button. The
MediaGauge? MG-9V has a battery saver mode and will
automatically shut off the display after 5 minutes.
To reference your MediaGauge? digital pressure gauge to the
input port: Press and hold the RESET/CLEAR button for 3
seconds. The MediaGauge? MG-9V will now be reference
to your input port. For example, if you have 20 psi on the
display and then you press and hold the RESET/CLEAR
button for 3 seconds the display will show 0.0 psi. A
measurement of 30 psi would then read as 10 psi on the
display.
To display the pressure reading in a different pressure unit:
Continue to depress the ON/UNIT/OFF button until the
arrow in the LCD points to the pressure units desired.
To manually power down the unit: Press the ON/UNIT/OFF
button and hold down for 3 seconds until OFF is displayed
and then release the button.
To reset the MediaGauge? digital pressure gauge: Make sure
the input port is either disconnected or connected to a 0 psi
input. Press and hold down the RESET/CLEAR button for 3
seconds.
SSI TECHNOLOGIES, INC.
Controls Division
2643 West Court Street
Janesville, WI 53548-5011
Phone: (608)758-1500
Fax: (608)758-2491
www.ssitechnologies.com
3
Copyright January 30, 2009
SSI Technologies Inc.
All Rights Reserved
Revision 4
RoHS
相关PDF资料 |
PDF描述 |
|---|---|
| 2135 | LAMP INCAND T1.25 WIRE TERM 1.3V |
| EWG203 | LAMP T1-1/2 14V 0.115A HI BRIGHT |
| OPF322A | LED RECEPT FBR OPTIC GAAIAS TO46 |
| ASFL1-64.000MHZ-L-T | OSCILLATOR 64.000 MHZ 3.3V SMD |
| OPF347C | LED FBR OPTC GAAIAS HS TO-46 ST |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MG-75-A-MD-R | 功能描述:SENSOR DIGITAL GAUGE 75PSI LCD RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-MD 标准包装:100 系列:* |
| MG-75-B-9V-R | 功能描述:SENSOR 75 PSI 1/8 NPT 9V RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-9V 标准包装:100 系列:* |
| MG-75-B-MD-R | 功能描述:SENSOR 75 PSI 4-20 MA 1/8 NPT RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-MD 标准包装:100 系列:* |
| MG75BZ50 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:TRANSISTOR | IGBT POWER MODULE | HALF BRIDGE | 500V V(BR)CES | 75A I(C) |
| MG75G2CL1-1 | 制造商:Toshiba America Electronic Components 功能描述: |
发布紧急采购，3分钟左右您将得到回复。