- 您现在的位置：买卖IC网 > PDF目录19011 > MG-750-B-MD-R (SSI Technologies Inc)SENSOR 750 PSI 4-20 MA 1/8 NPT PDF资料下载
参数资料
| 型号： | MG-750-B-MD-R |
| 厂商： | SSI Technologies Inc |
| 文件页数： | 4/10页 |
| 文件大小： | 0K |
| 描述： | SENSOR 750 PSI 4-20 MA 1/8 NPT |
| 产品培训模块： | P51 Pressure Measurement Overview |
| 标准包装： | 1 |
| 系列： | MG-MD |
| 压力类型： | 压力计 |
| 工作压力： | 750 PSI |
| 端口尺寸： | 公型，1/8"（3.175mm）NPT |
| 输出： | LCD 显示器 |
| 精确度： | ±0.25% |
| 电源电压： | 12V |
| 工作温度： | -10°C ~ 60°C |
| 封装/外壳： | 不锈钢 |
| 其它名称： | MG-750-B-MD MG-750-B-MD-ND |
SSI Technologies – Application Note PS-AN7
MediaGauge? (Model MG-MD) Digital Pressure Gauge
Product Overview
MediaGauge? MG-MD Panel
MediaGauge? MG-MD panel has a LCD display and three
To display the pressure reading in a different pressure unit:
Press the UNIT/SET button until the arrow in the LCD points
multi-functional buttons:
;
UNIT/SET;
to the pressure units desired.
To check the value of the low pressure setting: Press and
release the
button, the low pressure set point will be
displayed for 30 seconds.
To check the value of the high pressure setting: Press and
release the
button, the high pressure set point will be
displayed for 30 seconds.
To see the maximum peak pressure the unit has measured:
Press and hold down the
button for 3 seconds. The
maximum peak pressure value will be displayed and will
blink on the screen.
To reset the maximum peak pressure : Press and hold down
the
button for 3 seconds, and the peak hold value will
reset.
To return to the current pressure reading: Press and hold the
button for 3 seconds and the gauge will be back to the
measurement mode, the current pressure measurement will
be displayed and will not blink.
To power on the unit: There is no ON/OFF button on the
MediaGauge? MG-MD model. The MG-MD unit is
powered on and off via the external 12V supply voltage
To reference your MediaGauge? digital pressure gauge to the
input port: Press and hold down the button and the
button at the same time for 3 seconds. For example, if
you have 20 psi on the display and then you press and hold
source.
down the
button and the
button simultaneously for 3
seconds, the display will show 0.0 psi. A measurement of
When the external supply voltage is between 8 - 30 Vdc, the
LCD will be backlit and will continuously display the
pressure measurements.
30 psi would then read as 10 psi on the display.
To reset the MediaGauge? digital pressure gauge : Make sure
the input port is either disconnected or connected to a 0 psi
SSI TECHNOLOGIES, INC.
input. Press and hold down the
button at the same time for 3 seconds.
button and the
Controls Division
2643 West Court Street
Janesville, WI 53548-5011
Phone: (608)758-1500
Fax: (608)758-2491
Copyright January 30, 2009
SSI Technologies Inc.
All Rights Reserved
Revision 4
www.ssitechnologies.com
4
RoHS
相关PDF资料 |
PDF描述 |
|---|---|
| MG-500-B-MD-R | SENSOR 500 PSI 4-20 MA 1/8 NPT |
| D2HW-BL221M | SWITCH LEVER SPDT 2A SEALED |
| MG-300-B-MD-R | SENSOR 300 PSI 4-20 MA 1/8 NPT |
| MG-200-B-MD-R | SENSOR 200 PSI 4-20 MA 1/8 NPT |
| MG-100-B-MD-R | SENSOR 100 PSI 4-20 MA 1/8 NPT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MG-75-A-9V-R | 功能描述:SENSOR DIGITAL GAUGE 75PSI LCD RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-9V 标准包装:100 系列:* |
| MG-75-A-MD-R | 功能描述:SENSOR DIGITAL GAUGE 75PSI LCD RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-MD 标准包装:100 系列:* |
| MG-75-B-9V-R | 功能描述:SENSOR 75 PSI 1/8 NPT 9V RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-9V 标准包装:100 系列:* |
| MG-75-B-MD-R | 功能描述:SENSOR 75 PSI 4-20 MA 1/8 NPT RoHS:是 类别:传感器，转换器 >> 压力 系列:MG-MD 标准包装:100 系列:* |
| MG75BZ50 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:TRANSISTOR | IGBT POWER MODULE | HALF BRIDGE | 500V V(BR)CES | 75A I(C) |
发布紧急采购，3分钟左右您将得到回复。