参数资料
型号: MG1-30-A-9V-R
厂商: SSI Technologies Inc
文件页数: 3/6页
文件大小: 0K
描述: SENSOR DIGITAL GAUGE 30PSI LCD
产品培训模块: Digital Pressure Gauges
P51 Pressure Measurement Overview
产品目录绘图: MG(1,A) Series Side 1
MG(1,A) Series Side 2
特色产品: SSI Technologies Inc. MediaGauge? Digital Pressure Gauges
标准包装: 1
系列: MG-9V
压力类型: 压力计
工作压力: 30 PSI
端口尺寸: 公型,1/4"(6.35mm)NPT
输出: LCD 显示器
精确度: ±1%
电源电压: 9V
工作温度: -10°C ~ 60°C
封装/外壳: 不锈钢
其它名称: 734-1152
SSI Technologies – Application Note PS-AN6
MediaGauge? (Model MG1-9V) Digital Pressure Gauge
Product Overview
Since piezo resistive pressure sensors are sensitive to
changes in temperature, the MediaGauge? MG1-9V uses
signal conditioning to compensate for temperature and
calibration. The output signal is then converted into one of 3
user selectable forms (select units with the ON/UNIT/OFF
button):
1) PSI
2) BAR
To manually power down the unit: Press the ON/UNIT/OFF
button and hold down for 3 seconds until OFF is displayed and
then release the button.
The LIGHT/P-H (Peak-Hold) button is used to turn the LCD
backlight on/off and to display the maximum peak pressure the
unit has measured.
To turn the LCD backlight on : Press the LIGHT/P-H button once.
3) MPA (kg/cm2)
To turn the LCD backlight off: Press the LIGHT/P-H button
The MediaGauge? MG1-9V will display the pressure
reading after the ON/UNIT/OFF button is depressed. The
pressure measurement reading is updated 3 times per
second.
again.
To see the maximum peak pressure the unit has measured:
Press and hold down the LIGHT/P-H button for 3 seconds. The
maximum pressure reading will be blinking.
If the maximum
pressure read was over the unit’s maximum pressure range, o.L
MediaGauge? MG1-9V Panel
MediaGauge? MG1-9V panel has a LCD display and three multi-
functional buttons – ON/UNIT/OFF; LIGHT/P-H (Peak-Held) and
RESET/CLEAR.
The ON/UNIT/OFF button is used to display the pressure
will be blinking on the display.
To return to the current pressure reading: Press the LIGHT/P-H
button and hold down for 3 seconds.
The RESET/CLEAR button is used to reset the gauge to
whatever pressure is currently applied to the port and to clear the
reading; switch between pressure units (PSI; BAR; and MPA) and
stored
maximum
peak
pressure
reading.
Note:
The
to power down the unit.
To power on the unit: Press the ON/UNIT/OFF button.
The
RESET/CLEAR button only functions when held down for 3
seconds.
MediaGauge? MG1-9V has a battery saver mode and will
To reference your MediaGauge? digital pressure gauge to the
automatically shut off the display after 3 minutes.
input port:
Press and hold the RESET/CLEAR button for 3
seconds. The MediaGauge? MG1-9V will now be reference to
To display the pressure reading in a different pressure unit:
Continue to depress the ON/UNIT/OFF button until the arrow in
the LCD points to the pressure units desired.
SSI TECHNOLOGIES, INC.
Controls Division
2643 West Court Street
Janesville, WI 53548-5011
Phone: (608)758-1500
Fax: (608)758-2491
3
your input port. For example, if you have 20 psi on the display and
then you press and hold the RESET/CLEAR button for 3 seconds
the display will show 0.0 psi. A measurement of 30 psi would then
read as 10 psi on the display.
Copyright November 6, 2008
SSI Technologies Inc.
All Rights Reserved
Revision 3
相关PDF资料
PDF描述
MG-1500-A-9V-R SENSOR DIGITAL GAUGE 1500PSI LCD
OPF1412 TRANSMITTER FIBER OPTIC HS ST
KC3225A125.000C20E00 OSCILLATOR 125.000MHZ 2.5V SMD
OPF1412T TRANSMITTER FIBER OPTIC HS ST
D2VW-01L3-1HS SWITCH BASIC SPDT .1A SEALED
相关代理商/技术参数
参数描述
MG131A 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:0.3 SINGLE DIGIT NUMERIC DISPLAYS
MG131C 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:0.3 SINGLE DIGIT NUMERIC DISPLAYS
MG132A 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:0.3 SINGLE DIGIT NUMERIC DISPLAYS
MG132C 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:0.3 SINGLE DIGIT NUMERIC DISPLAYS
MG134A 制造商:MICRO-ELECTRONICS 制造商全称:Micro Electronics 功能描述:0.3 SINGLE DIGIT NUMERIC DISPLAYS