参数资料
型号: MGA-30-A-9V-R
厂商: SSI Technologies Inc
文件页数: 3/5页
文件大小: 0K
描述: SENSOR DIGITAL GAUGE 30PSI LCD
产品培训模块: Digital Pressure Gauges
P51 Pressure Measurement Overview
产品目录绘图: MG(1,A) Series Side 1
MG(1,A) Series Side 2
特色产品: SSI Technologies Inc. MediaGauge? Digital Pressure Gauges
标准包装: 1
系列: MG-9V
压力类型: 压力计
工作压力: 30 PSI
端口尺寸: 公型,1/4"(6.35mm)NPT
输出: LCD 显示器
精确度: ±0.5%
电源电压: 9V
工作温度: -10°C ~ 60°C
封装/外壳: 不锈钢
产品目录页面: 2804 (CN2011-ZH PDF)
其它名称: 734-1159
MGA-30-A-9V-000-000
SSI Technologies – Application Note PS-AN5
MediaGauge? (Model MGA-9V) Digital Pressure Gage
Product Overview
To see the maximum peak pressure the unit has measured:
Press and hold down the LIGHT/P-H button for 3 seconds.
The maximum pressure reading will be blinking. If the
maximum pressure read was over the unit’s maximum
pressure range, o.L will be blinking on the display.
Installation/Mounting
1) Mount the MediaGauge? MGA-9V digital pressure
gage on a suitable (1/4” NPT) female fitting. Use
Teflon tape or pipe dope to seal the threads.
To return to the current pressure reading:
LIGHT/P-H button and hold down for 3 seconds.
Press the
2) Do no over tighten. Torque to 150 in lbs +/- 1 in lb.
The RESET/CLEAR button is used to reset the gage to
whatever pressure is currently being applied to the port and
to clear the stored maximum peak pressure reading.
Electrical Specifications
To reference your MediaGauge? digital pressure gage to the
Supply Voltage
9V Battery
input port: Press and hold the RESET/CLEAR button for 3
seconds. The MediaGauge? MGA-9V will now be
reference to your input port. For example, if you have 20
psi on the display and then you press and hold the
RESET/CLEAR button for 3 seconds the display will show
0.0 psi. A measurement of 30 psi would then read as 10 psi
on the display.
To reset the MediaGauge? digital pressure gage: Make sure
the input port is either disconnected or connected to a 0 psi
input. Press and hold down the RESET/CLEAR button for 3
seconds.
To clear the maximum peak pressure reading: Press and hold
down the LIGHT/P-H button for 3 seconds until the
maximum pressure reading appears on the LCD (it will be
blinking). Release the LIGHT/P-H button. Press and hold
down RESET/CLEAR button for 3 seconds.
SSI TECHNOLOGIES, INC.
Controls Division
2643 West Court Street
Janesville, WI 53548-5011
Phone: (608)758-1500
Fax: (608)758-2491
3
Response Time
Accuracy
LCD Resolution (30 PSI)
LCD Resolution (100; 300 PSI)
Proof Pressure
Burst Pressure
Operating Temperature Range
Storage Temperature Range
< 1 ms
±1.0 FS
0.01
0.1
3 X Full Scale
10 X Full Scale or 15,000
psi whichever is less
-10° to 60°C (14° to 140°F)
-20° to 85°C (-4°to 185°F)
Copyright November 6, 2008
SSI Technologies Inc.
All Rights Reserved
Revision 3
相关PDF资料
PDF描述
P51-15-A-UC-I36-5V-000-000 SENSOR 15PSIA 1/4NPT 5V
P51-100-S-B-I36-4.5V-000-000 SENSOR 100PSIS 1/8NPT 4.5V
435640-3 STANDARD 5 POSITION DIP SWITCH
P51-1000-A-B-I36-5V-000-000 SENSOR 1000PSIA 1/8NPT 5V
P51-200-G-A-I36-4.5V-000-000 SENSOR 200PSIG 1/4NPT 4.5V
相关代理商/技术参数
参数描述
MGA-310G-BLK 制造商:Avago Technologies 功能描述:GPS LNA - Bulk
MGA-31189 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:0.25W High Gain Driver Amplifier
MGA-31189-BLKG 功能描述:射频放大器 0.25W High Gain Driver Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MGA-31189-TR1G 功能描述:射频放大器 0.25W High Gain Driver Amplifier RoHS:否 制造商:Skyworks Solutions, Inc. 类型:Low Noise Amplifier 工作频率:2.3 GHz to 2.8 GHz P1dB:18.5 dBm 输出截获点:37.5 dBm 功率增益类型:32 dB 噪声系数:0.85 dB 工作电源电压:5 V 电源电流:125 mA 测试频率:2.6 GHz 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:QFN-16 封装:Reel
MGA-31289 制造商:AVAGO 制造商全称:AVAGO TECHNOLOGIES LIMITED 功能描述:0.25W High Gain Driver Amplifier