- 您现在的位置：买卖IC网 > PDF目录384733 > MH88510 (Mitel Networks Corporation) Subscriber Line Interface Circuit (SLIC) Preliminary Information PDF资料下载
参数资料
| 型号： | MH88510 |
| 厂商： | Mitel Networks Corporation |
| 英文描述： | Subscriber Line Interface Circuit (SLIC) Preliminary Information |
| 中文描述： | 用户线接口电路（SLIC）的初步信息 |
| 文件页数： | 4/10页 |
| 文件大小： | 130K |
| 代理商： | MH88510 |
MH88510/11
Preliminary Information
2-56
The SHK output has low drive capability while the
LED output can drive an LED directly. The detection
circuit engages a ringing filter during applied ringing.
The ringing filter ensures that the SHK output toggles
at the ringing cadence and not at the ringing
frequency. The ring trip detection circuit also
prevents false off-hook detection due to the current
associated with the AC ringing voltage as well as
current transients when the ringing votlage is
switched in and out.
Hybrid
The 2- wire hybrid circuit converts the incoming
balanced signal at Tip and Ring of the telephone line
into a ground referenced output signal at JUNC of
the SLIC, and converts the ground referenced input
signal at JUNC of the SLIC into a non-balanced
output signal at Tip and Ring of the telephone line.
Return Loss at Tip-Ring
To maximise return loss, the impedance at Tip-Ring
should match the SLIC’s impedance (600
).
However, the SLIC’s input impedance is dependent
on the JUNC termination resistance. For a 600
SLIC input impedance, the JUNC must be
terminated with 754
.
Figure 2 illustrates a typical connection between two
SLICs through two crosspoint switches. Optimum
return loss occurs when JUNC is terminated with
754
. Since the JUNC input/output is 604
and the
crosspoint switches resistance are 75
+ 75
, this
configuration gives optimum return loss as shown in
Figure 3.
MUTE
A logic low at the MUTE input results on, muted
signals coming from Tip and Ring to the JUNC
terminal while allowing signals from the JUNC
terminal to Tip and Ring to be transmitted.
Tip-Ring Drive Circuit
The audio input ground referenced signal at JUNC is
converted to a differential output signal at Tip and
Ring. The output signal consists of the audio signal
superimposed on the DC battery feed current. The
Tip-Ring drive circuit is optimsed for good 2-Wire
longitudinal balance.
In addition, the Tip-Ring Drive Circuit has the
capability to drive a dry line (a line with no DC
current flowing); the AC Electrical Characteristics
apply (except for longitudinal balance), even when
the loop current drops to zero. Therefore, the
MH88510 has the capability to drive a line much
longer than 2000
providing the user is not
concerned with loop current, SHK detection or
ringing generator current.
Short Circuit Protection
The MH88510 is protected from long term (infinite)
short circuit conditions occurring between Tip and
Ring, Tip and AGND, and Ring and AGND.
Line Impedance
The MH88510’s Tip-Ring (Zin) impedance is fixed at
600
. For correct SLIC impedance, JUNC must be
appropriately
terminated.
Characteristics.
See
AC
Electrical
Transmit and Receive Gain
Transmit Gain (JUNC to Tip-Ring) and Receive Gain
(Tip-Ring to JUNC) are fixed. For correct gain, the
SLIC input impedance must match the line
impedance and JUNC must be appropriately
terminated.
相关PDF资料 |
PDF描述 |
|---|---|
| MH88511 | Subscriber Line Interface Circuit (SLIC) Preliminary Information |
| MH88610 | () |
| MH88617 | Programmable SLIC with Ringing Amplification(带振铃放大作用的可编程用户线接口电路（SLIC）) |
| MH88622-3 | DUAL OPS SLIC Preliminary Information |
| MH88622-5 | DUAL OPS SLIC Preliminary Information |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MH88511 | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:Subscriber Line Interface Circuit (SLIC) Preliminary Information |
| MH88520-1 | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:German Subscriber Line Interface Circuit (SLIC) Preliminary Information |
| MH88524 | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:Dual 2-4 Wire Circuit Preliminary Information |
| MH88600 | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:Global SLIC Preliminary Information |
| MH88610 | 制造商:MITEL 制造商全称:Mitel Networks Corporation 功能描述:Subscriber Line Interface Circuit (SLIC) Preliminary Information |
发布紧急采购，3分钟左右您将得到回复。