参数资料
型号: MIC2203YMM
厂商: Micrel Inc
文件页数: 6/13页
文件大小: 0K
描述: IC REG BUCK ADJ 0.3A 10MSOP
标准包装: 100
类型: 降压(降压)
输出类型: 可调式
输出数: 1
输出电压: 可调至 0.5V
输入电压: 2.3 V ~ 5.5 V
PWM 型: 电压模式
频率 - 开关: 1MHz
电流 - 输出: 300mA
同步整流器:
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 10-TFSOP,10-MSOP(0.118",3.00mm 宽)
包装: 管件
供应商设备封装: 10-MSOP
产品目录页面: 1092 (CN2011-ZH PDF)
其它名称: 576-1720-5
MIC2203YMM-ND
Micrel, Inc.
Functional Description
V IN
V IN provides power to the output and to the internal
bias supply. The supply voltage range is from 2.3V
to 5.5V. A minimum 1 μ F ceramic capacitor is
recommended for bypassing the input supply.
Enable
The enable pin provides a logic level control of the
output. In the off state, supply current of the device
is greatly reduced (typically <1 μ A). Also, in the off
state, the output drive is placed in a “tri-stated”
condition, where both the high side P-Channel
MOSFET and the low-side N-Channel are in an off
or non-conducting state. Do not drive the enable pin
above the supply voltage.
SYNC _I N
SYNC_IN pin enables the ability to change the
fundamental switching frequency. The SYNC_IN
frequency has a minimum frequency of 800KHz and
a maximum sync frequency of 1.2MHz. Careful
attention should be paid to not driving the SYNC_IN
pin greater than the supply voltage. Although this will
not damage the device, it can cause improper
operation.
MIC2203
SYNC_OUT
SYNC_OUT is an open collector output that
provides a signal equal to the internal oscillator
frequency. This creates the ability for multiple
MIC2203s to be connected together in a master-
slave configuration for frequency matching of the
converters. A typical 10k ? resistor is recommended
for the pull-up resistor.
Bias
The bias supply is an internal 2.3V linear regulator
that supplies the internal biasing voltage to the
MIC2203. A 10nF ceramic capacitor is required on
this pin for bypassing. Do not use the bias pin as a
supply. The bias pin was designed to supply internal
power only.
Feedback
The feedback pin provides the control path to control
the output. A resistor divider connecting the
feedback to the output is used to adjust the desired
output voltage. Refer to the feedback section in the
“Applications Information” for more detail.
December 2004
6
M9999-120604
(408) 955-1690
相关PDF资料
PDF描述
VI-BWR-EW-F1 CONVERTER MOD DC/DC 7.5V 100W
VE-J71-EX-B1 CONVERTER MOD DC/DC 12V 75W
MIC2202YMM IC REG BUCK ADJ 0.6A 10MSOP
VI-BWP-EX-F4 CONVERTER MOD DC/DC 13.8V 75W
VE-J5X-EX-B1 CONVERTER MOD DC/DC 5.2V 75W
相关代理商/技术参数
参数描述
MIC2203YMM TR 功能描述:直流/直流开关调节器 1MHz Synchronous Buck Regulator RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
MIC2204 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:High-Efficiency 2MHz Synchronous Buck Converter
MIC2204_05 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:High-Efficiency 2MHz Synchronous Buck Converter
MIC2204-10BMM 功能描述:IC REG BUCK SYNC ADJ 0.6A 10MSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:20 系列:SIMPLE SWITCHER® 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:12V 输入电压:4 V ~ 60 V PWM 型:电压模式 频率 - 开关:52kHz 电流 - 输出:1A 同步整流器:无 工作温度:-40°C ~ 125°C 安装类型:通孔 封装/外壳:16-DIP(0.300",7.62mm) 包装:管件 供应商设备封装:16-DIP 其它名称:*LM2575HVN-12LM2575HVN-12
MIC2204-10BMM TR 功能描述:IC REG BUCK SYNC ADJ 0.6A 10MSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:20 系列:SIMPLE SWITCHER® 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:12V 输入电压:4 V ~ 60 V PWM 型:电压模式 频率 - 开关:52kHz 电流 - 输出:1A 同步整流器:无 工作温度:-40°C ~ 125°C 安装类型:通孔 封装/外壳:16-DIP(0.300",7.62mm) 包装:管件 供应商设备封装:16-DIP 其它名称:*LM2575HVN-12LM2575HVN-12