参数资料
| 型号： | MIC2210-PSYML TR |
| 厂商： | Micrel Inc |
| 文件页数： | 10/11页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 3/3.3V .15A/.3A 10MLF |
| 标准包装： | 5,000 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 3V，3.3V |
| 输入电压： | 2.25 V ~ 5.5 V |
| 电压 - 压降（标准）： | 0.12V @ 120mA，0.24V @ 300mA |
| 稳压器数量： | 2 |
| 电流 - 输出： | 150mA，300mA |
| 电流 - 限制（最小）： | 150mA，300mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-VFDFN 裸露焊盘，10-MLF? |
| 供应商设备封装： | 10-MLF?（3x3） |
| 包装： | 带卷 (TR) |
| 其它名称： | MIC2210-PSYMLTR MIC2210-PSYMLTR-ND |
Micrel, Inc.
Functional Description
The MIC2210 is a high performance, low quiescent
current power management IC consisting of two μCap
low dropout regulators, an open-drain driver. The first
regulator is capable of sourcing 150mA at output
voltages from 1.25V to 5V. The second regulator is
capable of sourcing 300mA of current at output voltages
from 1.25V to 5V. An open-drain driver completes the
power management chipset, offering the capability of
driving LEDs for keypad backlighting in applications such
as cell phones.
Enable 1 and 2
The enable inputs allow for logic control of both output
voltages with individual enable inputs. The enable input
is active high, requiring 1.8V for guaranteed operation.
The enable input is CMOS logic and cannot by left
floating.
Open-Drain Driver (DRV)
The drive (DRV) pin is an open-drain output capable of
sinking 150mA of current. This output is controlled by a
logic level input, the switch (SW) pin. The switch pin is
an active high input and cannot be left floating.
Input Capacitor
Good bypassing is recommended from input to ground
to help improve AC performance. A 1μF capacitor or
greater located close to the IC is recommended.
MIC2210
Bypass Capacitor
The internal reference voltage of the MIC2210 can be
by-passed with a capacitor to ground to reduce output
noise and increase power supply rejection (PSRR). A
quick-start feature allows for quick turn-on of the output
voltage regardless of the size of the capacitor. The
recommended nominal bypass capacitor is 0.01μF, but it
can be increased without limit.
Output Capacitor
Each regulator output requires a 1μF ceramic output
capacitor for stability. The output capacitor value can be
increased to improve transient response, but perform-
ance has been optimized for a 1μF ceramic type output
capacitor.
X7R/X5R dielectric-type ceramic capacitors are recom-
mended because of their temperature performance.
X7R-type capacitors change capacitance by 15% over
their operating temperature range and are the most
stable type of ceramic capacitors. Z5U and Y5V
dielectric capacitors change value by as much as 50%
and 60% respectively over their operating temperature
ranges. To use a ceramic chip capacitor with Y5V
dielectric, the value must be much higher than a X7R
ceramic capacitor to ensure the same minimum capaci-
tance over the equivalent operating temperature range.
November 2006
10
M9999-112006
相关PDF资料 |
PDF描述 |
|---|---|
| AP1115BY25L-13 | IC REG LDO 2.5V .6A SOT89-3 |
| AP1115BY25L-13 | IC REG LDO 2.5V .6A SOT89-3 |
| AP1115BY28L-13 | IC REG LDO 2.8V .6A SOT89-3 |
| ASC22DRTS-S13 | CONN EDGECARD 44POS .100 EXTEND |
| MIC2210-MWYML TR | IC REG LDO 2.8V/1.6V 10MLF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC2210-SSBML | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:Dual μCap LDO with Open-Drain Driver |
| MIC2210-SSYML | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:Dual μCap LDO with Open-Drain Driver |
| MIC2210-SSYML TR | 功能描述:低压差稳压器 - LDO Dual Cap LDO with Open Drain Driver in 3mm x 3mm MLF (Lead Free) RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MIC2211 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:Dual UCap LDO in 3mm 】 3mm MLF⑩ |
| MIC2211-1.5/1.8BML | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:Dual UCap LDO in 3mm 】 3mm MLF⑩ |
发布紧急采购，3分钟左右您将得到回复。