参数资料
型号: MIC23050-CYML TR
厂商: Micrel Inc
文件页数: 9/15页
文件大小: 0K
描述: IC REG BUCK SYNC 1V 0.6A 8MLF
标准包装: 1
系列: HyperLight Load®
类型: 降压(降压)
输出类型: 固定
输出数: 1
输出电压: 1V
输入电压: 2.7 V ~ 5.5 V
PWM 型: 电流模式,混合
频率 - 开关: 4MHz
电流 - 输出: 600mA
同步整流器:
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 8-VFDFN 裸露焊盘,8-MLF?
包装: 标准包装
供应商设备封装: 8-MLF?(2x2)
其它名称: 576-3649-6
MIC23050-CYML TRDKR
MIC23050-CYML TRDKR-ND
Micrel, Inc.
Functional Description
VIN
VIN provides power to the MOSFETs for the switch mode
regulator section and to the analog supply circuitry. Due to
the high switching speeds, it is recommended that a 2.2μF
or greater capacitor be placed close to VIN and the power
ground (PGND) pin for bypassing. Refer to the layout
recommendations for details.
EN
The enable pin (EN) controls the on and off state of the
device. A logic high on the enable pin activates the
regulator, while a logic low deactivates it. MIC23050
features built-in soft-start circuitry that reduces in-rush
current and prevents the output voltage from overshooting
at start up. Do not leave this pin floating.
SW
The switch (SW) pin connects directly to the inductor and
provides the switching current necessary to operate in
PWM mode. Due to the high speed switching on this pin,
the switch node should be routed away from sensitive
nodes such as the CFF pin.
SNS
An inductor is connected from the SW pin to the SNS pin.
The SNS pin is the output pin of the device and a minimum
of 2.2μF bypass capacitor should be connected in shunt.
In order to reduce parasitic inductance it is good practice
to place the output bypass capacitor as close to the
inductor as possible.
MIC23050
CFF
The CFF pin is connected to the SNS pin of MIC23050
with a feed-forward capacitor of 560pF. The CFF pin itself
is compared with the internal reference voltage (V REF ) of
the device and provides the control path to control the
output. V REF is equal to 0.72V. The CFF pin is sensitive to
noise and should be place away from the SW pin. Refer to
the layout recommendations for details.
PGND
Power ground (PGND) is the ground path for the high
current PWM mode. The current loop for the power ground
should be as small as possible and separate from the
Analog ground (AGND) loop. Refer to the layout
recommendations for more details.
AGND
Signal ground (AGND) is the ground path for the biasing
and control circuitry. The current loop for the signal ground
should be separate from the Power ground (PGND) loop.
Refer to the layout recommendations for more details.
September 2011
9
M9999-092211-E
相关PDF资料
PDF描述
ABM08DSXH CONN EDGECARD 16POS DIP .156 SLD
ACM08DRXN CONN EDGECARD 16POS DIP .156 SLD
ABM08DRXN CONN EDGECARD 16POS DIP .156 SLD
VI-JVV-CY CONVERTER MOD DC/DC 5.8V 50W
VI-JVT-CZ-S CONVERTER MOD DC/DC 6.5V 25W
相关代理商/技术参数
参数描述
MIC23050-GYML 制造商:Rochester Electronics LLC 功能描述: 制造商:RF Micro Devices Inc 功能描述:
MIC23050-GYML TR 功能描述:直流/直流开关调节器 High Efficiency 600mA Buck Switcher (Lead Free) RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5
MIC23050-GYML-TR 功能描述:Buck Switching Regulator IC Positive Fixed 1.8V 1 Output 600mA 8-VFDFN Exposed Pad, 8-MLF? 制造商:microchip technology 系列:HyperLight Load? 包装:剪切带(CT) 零件状态:停产 功能:降压 输出配置:正 拓扑:降压 输出类型:固定 输出数:1 电压 - 输入(最小值):2.7V 电压 - 输入(最大值):5.5V 电压 - 输出(最小值/固定):1.8V 电压 - 输出(最大值):- 电流 - 输出:600mA 频率 - 开关:4MHz 同步整流器:是 工作温度:-40°C ~ 125°C (TJ) 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘,8-MLF? 供应商器件封装:8-MLF?(2x2) 标准包装:1
MIC23050-SYML 制造商:Micrel 功能描述:Sw. Regulator Buck 3.3V 600mA 4MHz MLF8
MIC23050-SYML TR 功能描述:直流/直流开关调节器 High Efficiency 600mA Buck Switcher (Lead Free) RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5