参数资料
| 型号： | MIC33153YHJ TR |
| 厂商： | Micrel Inc |
| 文件页数： | 11/17页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK SYNC ADJ 1.2A 14MLF |
| 标准包装： | 1 |
| 系列： | HyperLight Load® |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.62 V ~ 3.6 V |
| 输入电压： | 2.7 V ~ 5.5 V |
| PWM 型： | 混合物 |
| 频率 - 开关： | 4MHz |
| 电流 - 输出： | 1.2A |
| 同步整流器： | 是 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-VFDFN 裸露焊盘，14-MLF? |
| 包装： | 标准包装 |
| 供应商设备封装： | 14-MLF?（3x3.5） |
| 其它名称： | 576-3904-6 |
Micrel Inc.
Application Information
The MIC33153 is a high performance DC-to-DC step
down regulator offering a small solution size. With the
HyperLight Load? switching scheme, the MIC33153 is
able to maintain high efficiency throughout the entire
load range while providing ultra-fast load transient
response. The following sections provide additional
device application information.
Input Capacitor
A 2.2μF ceramic capacitor or greater should be placed
close to the VIN pin and PGND pin for bypassing. A
Murata GRM188R60J475ME84D, size 0603, 4.7μF
ceramic capacitor is recommended based upon
performance, size, and cost. A X5R or X7R temperature
rating is recommended for the input capacitor. Y5V
temperature rating capacitors, aside from losing most of
their capacitance over temperature, can also become
resistive at high frequencies. This reduces their ability to
filter out high frequency noise.
Output Capacitor
The MIC33153 is designed for use with a 2.2μF or
greater ceramic output capacitor. Increasing the output
capacitance will lower output ripple and improve load
transient response but could also increase solution size
or cost. A low equivalent series resistance (ESR)
ceramic output capacitor such as the Murata
GRM188R60J475ME84D, size 0603, 4.7μF ceramic
capacitor is recommended based upon performance,
size, and cost. Both the X7R or X5R temperature rating
capacitors are recommended. The Y5V and Z5U
temperature rating capacitors are not recommended due
to their wide variation in capacitance over temperature
and increased resistance at high frequencies.
Compensation
The MIC33153 is designed to be stable with a 4.7μF
ceramic (X5R) output capacitor.
Duty Cycle
The typical maximum duty cycle of the MIC33153 is
80%.
Efficiency Considerations
Efficiency is defined as the amount of useful output
power, divided by the amount of power supplied:
MIC33153
Maintaining high efficiency serves two purposes. It
reduces power dissipation in the power supply, reducing
the need for heat sinks and thermal design
considerations and it reduces consumption of current for
battery powered applications. Reduced current draw
from a battery increases the devices operating time and
is critical in hand held devices.
There are two types of losses in switching converters;
DC losses and switching losses. DC losses are simply
the power dissipation of I 2 R. Power is dissipated in the
high side switch during the on cycle. Power loss is equal
to the high side MOSFET R DSON multiplied by the Switch
Current squared. During the off cycle, the low side N-
channel MOSFET conducts, also dissipating power.
Device operating current also reduces efficiency. The
product of the quiescent (operating) current and the
supply voltage represents another DC loss. The current
required driving the gates on and off at a constant 4MHz
frequency and the switching transitions make up the
switching losses.
Figure 3. Efficiency Under Load
Figure 3 shows an efficiency curve. From no load to
100mA, efficiency losses are dominated by quiescent
current losses, gate drive and transition losses. By using
the HyperLight Load? mode, the MIC33153 is able to
maintain high efficiency at low output currents.
Efficiency % = ? ? OUT
?
? ? × 100
? V × I OUT
V IN × I IN
?
?
September 2010
11
M9999-092910-A
相关PDF资料 |
PDF描述 |
|---|---|
| MIC35152WD TR | IC REG LDO ADJ 1.5A TO-252-5 |
| MIC35302WD TR | IC REG LDO ADJ 3A TO-252-5 |
| MIC37101-2.5YM | IC REG LDO 2.5V 1A 8-SOIC |
| MIC37110-1.8YS TR | IC REG LDO 1.8V 1A SOT223-3 |
| MIC37139-2.5YS TR | IC REG LDO 2.5V 1.5A SOT-223 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC33163YGJ-T5 | 功能描述:Buck Switching Regulator IC Positive Adjustable 0.7V 1 Output 1A 20-PowerTFQFN 制造商:microchip technology 系列:HyperLight Load? 包装:剪切带（CT） 零件状态:停产 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:2.7V 电压 - 输入（最大值）:5.5V 电压 - 输出（最小值/固定）:0.7V 电压 - 输出（最大值）:5V 电流 - 输出:1A 频率 - 开关:4MHz 同步整流器:是 工作温度:-40°C ~ 125°C （TJ） 安装类型:表面贴装 封装/外壳:20-PowerTFQFN 供应商器件封装:20-QFN（2.5x3） 标准包装:1 |
| MIC33164YGJ-T5 | 功能描述:Buck Switching Regulator IC Positive Adjustable 0.7V 1 Output 1A 20-PowerTFQFN 制造商:microchip technology 系列:HyperLight Load? 包装:剪切带（CT） 零件状态:过期 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:2.7V 电压 - 输入（最大值）:5.5V 电压 - 输出（最小值/固定）:0.7V 电压 - 输出（最大值）:5V 电流 - 输出:1A 频率 - 开关:4MHz 同步整流器:是 工作温度:-40°C ~ 125°C （TJ） 安装类型:表面贴装 封装/外壳:20-PowerTFQFN 供应商器件封装:20-QFN（2.5x3） 标准包装:1 |
| MIC-3321 | 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:3U CompactPCI Pentium M 2.0G High performance Controller |
| MIC-3321C | 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:3U CompactPCI Pentium M 2.0G High performance Controller |
| MIC-3321D-DE | 制造商:Advantech Co Ltd 功能描述:3U cPCI P-M 2GHz CPU Card 1G RAM suppor |
发布紧急采购，3分钟左右您将得到回复。