- 您现在的位置：买卖IC网 > PDF目录19731 > MIC37139-1.8BS TR (Micrel Inc)IC REG LDO 2.8V 1.5A SOT-223 PDF资料下载
参数资料
| 型号： | MIC37139-1.8BS TR |
| 厂商： | Micrel Inc |
| 文件页数： | 9/10页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 2.8V 1.5A SOT-223 |
| 标准包装： | 2,500 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 2.8V |
| 输入电压： | 最高 6V |
| 稳压器数量： | 1 |
| 电流 - 输出： | 1.5A（最小） |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | TO-261-4，TO-261AA |
| 供应商设备封装： | SOT-223 |
| 包装： | 带卷 (TR) |
| 其它名称： | MIC37139-1.8BSTR MIC37139-1.8BSTR-ND |
Micrel, Inc.
Transient Response and 3.3V to 2.5V, 2.5V to 1.8V
or1.65V, or 2.5V to 1.5V Conversions
The MIC37139 has excellent transient response to
variations in input voltage and load current. The device
has been designed to respond quickly to load current
variations and input voltage variations. Large output
capacitors are not required to obtain this performance. A
standard 10μF output capacitor, preferably tantalum, is
all that is required. Larger values help to improve
performance even further.
By virtue of its low-dropout voltage, this device does not
saturate into dropout as readily as similar NPN-based
designs. When converting from 3.3V to 2.5V, 2.5V to
1.8V or 1.65V, or 2.5V to 1.5V, the NPN-based
regulators are already operating in dropout, with typical
MIC37139
dropout requirements of 1.2V or greater. To convert
down to 2.5V without operating in dropout, NPN-based
regulators require an input voltage of 3.7V at the very
least. The MIC37139 regulator will provide excellent
performance with an input as low as 3.0V or 2.25V,
respectively. This gives the PNP-based regulators a
distinct advantage over older, NPN-based linear
regulators.
Minimum Load Current
The MIC37139 regulator is specified between finite
loads. If the output current is too small, leakage currents
dominate and the output voltage rises. A 10mA minimum
load current is necessary for proper operation.
November 2009
9
M9999-110209
相关PDF资料 |
PDF描述 |
|---|---|
| TOP242YN | IC OFFLINE SWIT UVLO HV TO220 |
| LCMXO2280C-4T144I | IC PLD 2280LUTS 113I/O 144-TQFP |
| MIC37139-1.8BS | IC REG LDO 2.8V 1.5A SOT-223 |
| CDRH104RNP-100NC | INDUCTOR POWER 10UH 4.40A SMD |
| LCMXO2280E-5T144C | IC PLD 2280LUTS 113I/O 144-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC37139-2.5BS | 功能描述:IC REG LDO 2.5V 1.5A SOT-223 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:3,000 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.8V 输入电压:最高 16V 电压 - 压降（标准）:0.3V @ 80mA 稳压器数量:1 电流 - 输出:80mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) 其它名称:MIC5203-3.8BM5TRMIC5203-3.8BM5TR-ND |
| MIC37139-2.5BS TR | 功能描述:IC REG LDO 2.5V 1.5A SOT-223 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:3,000 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.8V 输入电压:最高 16V 电压 - 压降（标准）:0.3V @ 80mA 稳压器数量:1 电流 - 输出:80mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:带卷 (TR) 其它名称:MIC5203-3.8BM5TRMIC5203-3.8BM5TR-ND |
| MIC37139-2.5YS | 功能描述:低压差稳压器 - LDO 1.5A Low Voltage uCap LDO Regulator in SOT223 Pkg (Lead Free) RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MIC37139-2.5YS TR | 功能描述:低压差稳压器 - LDO 1.5A Low Voltage uCap LDO Regulator in SOT223 Pkg (Lead Free) RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MIC-3714 | 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:250 kS/s, 16-bit, 16-ch CPCI Multifunction Card |
发布紧急采购，3分钟左右您将得到回复。