参数资料
| 型号： | MIC5203-3.8YM5 TR |
| 厂商： | Micrel Inc |
| 文件页数： | 8/10页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 3.8V 80MA SOT23-5 |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 3.8V |
| 输入电压： | 最高 16V |
| 电压 - 压降（标准）： | 0.3V @ 80mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 80mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SC-74A，SOT-753 |
| 供应商设备封装： | SOT-23-5 |
| 包装： | 标准包装 |
| 产品目录页面： | 1097 (CN2011-ZH PDF) |
| 其它名称： | 576-2732-6 |
Micrel, Inc.
Applications Information
Input Capacitor
A 0.1μF capacitor should be placed from IN to GND if
there is more than 10 inches of wire between the input
and the AC filter capacitor or when a battery is used as
the input.
Output Capacitor
Typical PNP based regulators require an output
capacitor to prevent oscillation. The MIC5203 is
ultrastable, requiring only 0.47μF of output capacitance
for stability. The regulator is stable with all types of
capacitors, including the tiny, low-ESR ceramic chip
capacitors. The output capacitor value can be increased
without limit to improve transient response.
The capacitor should have a resonant frequency above
500kHz. Ceramic capacitors work, but some dielectrics
have poor temperature coefficients, which will affect the
value of the output capacitor over temperature. Tantalum
capacitors are much more stable over temperature, but
typically are larger and more expensive. Aluminum
electrolytic capacitors will also work, but they have
electrolytes that freeze at about –30°C. Tantalum or
ceramic capacitors are recommended for operation
below –25°C.
MIC5203
No-Load Stability
The MIC5203 will remain stable and in regulation with no
load (other than the internal voltage divider) unlike many
other voltage regulators. This is especially important in
CMOS RAM keep-alive applications.
Enable Input
The MIC5203 features nearly zero off-mode current.
When EN (enable input) is held below 0.6V, all internal
circuitry is powered off. Pulling EN high (over 2.0V) re-
enables the device and allows operation. EN draws a
small amount of current, typically 15μA. While the logic
threshold is TTL/CMOS compatible, EN may be pulled
as high as 20V, independent of V IN .
November 2009
8
M9999-111909
相关PDF资料 |
PDF描述 |
|---|---|
| GCC60DRYH-S93 | CONN EDGECARD 120PS DIP .100 SLD |
| GSC43DREN-S93 | CONN EDGECARD 86POS .100 EYELET |
| GMC43DREN-S93 | CONN EDGECARD 86POS .100 EYELET |
| GCC65DREN-S93 | CONN EDGECARD 130PS .100 EYELET |
| GSC43DREH-S93 | CONN EDGECARD 86POS .100 EYELET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC5203-4.0BM4 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:μCap 80mA Low-Dropout Regulator |
| MIC5203-4.0BM4 TR | 功能描述:IC REG LDO 4V 80MA SOT-143 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:500 系列:- 稳压器拓扑结构:正，固定式 输出电压:12V 输入电压:14.5 V ~ 35 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:500mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 125°C 安装类型:通孔 封装/外壳:TO-205AD，TO-39-3 金属罐 供应商设备封装:TO-39 包装:散装 其它名称:*LM78M12CH*LM78M12CH/NOPBLM78M12CH |
| MIC5203-4.0BM5 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MIC5203-4.0BM5 TR | 功能描述:IC REG LDO 4V 80MA SOT23-5 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 标准包装:500 系列:- 稳压器拓扑结构:正，固定式 输出电压:12V 输入电压:14.5 V ~ 35 V 电压 - 压降（标准）:- 稳压器数量:1 电流 - 输出:500mA 电流 - 限制（最小）:- 工作温度:-40°C ~ 125°C 安装类型:通孔 封装/外壳:TO-205AD，TO-39-3 金属罐 供应商设备封装:TO-39 包装:散装 其它名称:*LM78M12CH*LM78M12CH/NOPBLM78M12CH |
| MIC5203-4.0YM4 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:μCap 80mA Low-Dropout Regulator |
发布紧急采购，3分钟左右您将得到回复。