参数资料
| 型号： | MIC5366-3.3YMT TZ |
| 厂商： | Micrel Inc |
| 文件页数： | 6/20页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO 3.3V .15A 4TMLF |
| 标准包装： | 1 |
| 稳压器拓扑结构： | 正，固定式 |
| 输出电压： | 3.3V |
| 输入电压： | 最高 5.5V |
| 电压 - 压降（标准）： | 0.155V @ 150mA |
| 稳压器数量： | 1 |
| 电流 - 输出： | 150mA |
| 电流 - 限制（最小）： | 200mA |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 4-UDFN 裸露焊盘，4-TMLF? |
| 供应商设备封装： | 4-TMLF?（1x1） |
| 包装： | 标准包装 |
| 其它名称： | 576-3950-6 |
Power Dissipation (P D ) ........................... Internally Limited
ESD Rating .................................................................. 2kV
Micrel, Inc.
Absolute Maximum Ratings (1)
Supply Voltage (V IN ) ............................................... 0V to 6V
Enable Voltage (V EN ). ............................................. 0V to V IN
(3)
Lead Temperature (soldering, 3μsec) ........................ 260°C
Junction Temperature (T J ) ........................ –40°C to +150°C
Storage Temperature (T s ) ......................... –65°C to +150°C
(4)
MIC5365/6
Operating Ratings (2)
Supply Voltage (V IN ) ......................................... 2.5V to 5.5V
Enable Voltage (V EN ) .............................................. 0V to V IN
Junction Temperature (T J ) ........................ –40°C to +125°C
Junction Thermal Resistance
1mm × 1mm Thin MLF-4 ( θ JA ) ......................... 240°C/W
SC-70-5 ( θ JA ) ................................................ 256.5°C/W
Thin SOT23-5 ( θ JA ) .......................................... 253°C/W
Electrical Characteristics (5)
V IN = V EN = V OUT + 1V; C IN = C OUT = 1μF; I OUT = 100μA; T J = 25°C, bold values indicate –40°C to +125°C, unless noted.
Parameter
Condition
Min.
Typ.
Max.
Units
Output Voltage Accuracy
Line Regulation
Variation from nominal V OUT
Variation from nominal V OUT ; –40°C to +125°C
V IN = V OUT +1V to 5.5V; I OUT = 100μA
–2.0
–3.0
0.02
+2.0
+3.0
0.3
%
%
%
Load Regulation
(6)
I OUT = 100μA to 150mA
I OUT = 50mA; V OUT ≥ 2.8V
0.3
55
1
110
%
mV
Dropout Voltage
(7)
I OUT = 150mA; V OUT ≥ 2.8V
I OUT = 50mA; V OUT < 2.8V
I OUT = 150mA; V OUT < 2.8V
155
60
180
310
135
380
mV
mV
mV
Ground Pin Current
(8)
I OUT = 0mA
29
39
μA
Ground Pin Current in Shutdown
Ripple Rejection
V EN ≤ 0.2V
f = up to 1kHz; C OUT = 1μF
f = 1kHz – 10kHz; C OUT = 1μF
0.05
80
65
1
μA
dB
dB
Current Limit
Output Voltage Noise
Auto-Discharge NFET
Resistance
V OUT = 0V
C OUT = 1μF, 10Hz to 100kHz
MIC5366 Only; V EN = 0V; V IN = 3.6V; I OUT = –3mA
200
325
200
30
550
mA
μV RMS
?
Enable Input
Enable Input Voltage
Enable Input Current
Turn-on Time
Logic Low
Logic High
V IL ≤ 0.2V
V IH ≥ 1.2V
C OUT = 1μF; I OUT = 150mA
1.2
0.01
0.01
50
0.2
1
1
125
V
V
μA
μA
μs
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside its operating rating.
3. The maximum allowable power dissipation of any T A (ambient temperature) is P D(max) = T J(max) – T A ) / θ JA . Exceeding the maximum allowable power
dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown.
4. Devices are ESD sensitive. Handling precautions recommended. Human body model, 1.5k Ω in series with 100pF.
5. Specification for packaged product only.
6. Regulation is measured at constant junction temperature using low duty cycle pulse testing, changes in output voltage due to heating effects are
covered by the thermal regulation specification.
7. Dropout voltage is defined as the input-to-output differential at which the output voltage drops 2% below its nominal value measured at 1V differential.
For outputs below 2.5V, dropout voltage is the input-to-output differential with the minimum input voltage 2.5V.
8. Ground pin current is the regulator quiescent current. The total current drawn from the supply is the sum of the load current plus the ground pin
current.
July 16, 2013
6
Revision 3.1
相关PDF资料 |
PDF描述 |
|---|---|
| ABB10DHAT | CONN EDGECARD 20POS R/A .050 SLD |
| RSM28DRYH | CONN EDGECARD 56POS DIP .156 SLD |
| AMM10DRSI-S288 | CONN EDGECARD 20POS .156 EXTEND |
| RSM30DRSI | CONN EDGECARD 60POS DIP .156 SLD |
| GBB80DHNT | CONN EDGECARD 160PS .050 DIP SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC5367-1.2YMT TR | 功能描述:低压差稳压器 - LDO Single 200mA Peak LDO in 1.6mm x 1.6mm Thin MLF RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MIC5367-1.2YMT-TR | 功能描述:Linear Voltage Regulator IC Positive Fixed 1 Output 1.2V 150mA 6-TMLF? (1.6x1.6) 制造商:microchip technology 系列:- 包装:剪切带（CT） 零件状态:有效 稳压器拓扑:正，固定式 电压 - 输出:1.2V 电流 - 输出:150mA 电压 - 跌落（典型值）:0.18V @ 150mA 稳压器数:1 电压 - 输入:2.5 V ~ 5.5 V 电流 - 限制（最小值）:200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-UFDFN 裸露焊盘 供应商器件封装:6-TMLF?（1.6x1.6） 标准包装:1 |
| MIC5367-1.5YMT TR | 功能描述:低压差稳压器 - LDO Single 200mA Peak LDO in 1.6mm x 1.6mm Thin MLF RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| MIC5367-1.5YMT-TR | 功能描述:Linear Voltage Regulator IC Positive Fixed 1 Output 1.5V 150mA 6-TMLF? (1.6x1.6) 制造商:microchip technology 系列:- 包装:剪切带（CT） 零件状态:停产 稳压器拓扑:正，固定式 电压 - 输出:1.5V 电流 - 输出:150mA 电压 - 跌落（典型值）:0.18V @ 150mA 稳压器数:1 电压 - 输入:2.5 V ~ 5.5 V 电流 - 限制（最小值）:200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:6-UFDFN 裸露焊盘 供应商器件封装:6-TMLF?（1.6x1.6） 标准包装:1 |
| MIC5367-3.3YMT TR | 功能描述:低压差稳压器 - LDO Single 200mA Peak LDO in 1.6mm x 1.6mm Thin MLF RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
发布紧急采购，3分钟左右您将得到回复。