参数资料
| 型号： | MIC708TN |
| 厂商： | Micrel Inc |
| 文件页数： | 6/7页 |
| 文件大小： | 0K |
| 描述： | IC SUPERVISOR 3.08V VTH 8-DIP |
| 标准包装： | 50 |
| 类型： | 简单复位/加电复位 |
| 监视电压数目： | 1 |
| 输出： | 补充型 |
| 复位： | 高有效/低有效 |
| 复位超时： | 最小为 140 ms |
| 电压 - 阀值： | 3.08V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 通孔 |
| 封装/外壳： | 8-DIP（0.300"，7.62mm） |
| 供应商设备封装： | 8-PDIP |
| 包装： | 管件 |
MIC706P/R/S/T, MIC708R/S/T
Applications Information
Power Fail Warning
An additional comparator which is independent of the other
functions on the MIC706P/R/S/T is provided for early warning
of power failure. An external voltage divider can be used to
compare unregulated DC to an internal 1.25V reference. The
voltage divider ratio on the input of the power-fail comparator
(PFI) can be chosen so as to trip the power fail comparator a
few milliseconds before V CC falls below the maximum reset
threshold voltage. The output of the power-fail comparator
(/PFO) can be used to interrupt the microprocessor when
used in this mode and execute shut-down procedures prior
to power loss. Hysteresis can be added to this comparator
with external resistors, as is commonly done with any com-
parator. When VCC < VBATT - 1.2V (typ.), the power-fail
comparator is turned off and /PFO is pulled low in order to
conserve power.
Unregulated DC
R1
PFI
+
PFO
1.25V -
R2
Figure 1. Power Fail Comparator
Micrel, Inc.
Watchdog Timer
The microprocessor can be monitored by connecting the
WDI pin (watchdog input) to a bus line or an I/O line. If a
transition doesn't occur on the WDI pin with in the watchdog
timeout (Table 1.), the microprocessor is reset. /RESET will
remain asserted for 200ms when this occurs. A minimum
pulse of 100ns or any transition low-to-high or high-to-low
on the WDI pin will reset the watchdog timer. The output of
the watchdog timer (WDO) will remain high, if WDI sees a
valid transition within the watchdog period or if VCC falls
below the reset threshold as the watchdog timer is disabled
when this happens.
Microprocessor Reset
The /RESET pin is asserted whenever V CC falls below the
reset threshold voltage. The reset pin remains asserted for a
period of 200ms after VCC has risen above the reset thresh-
old voltage. The reset timeout period can also be selected
by the end user, see Table 1. The reset function ensures the
microprocessor is properly reset and powers up into a known
condition after a power failure. /RESET will remain valid with
VCC as low as 1.4V and when auxiliary power is connected
to VBATT (VBATT > 2.0V), the reset pin will remain valid with
VCC from 0V to 5.5V.
MIC706P/R/S/T, MIC708R/S/T
6
January 2006
相关PDF资料 |
PDF描述 |
|---|---|
| MIC79110-4.2YML TR | IC BATTERY CHARGER LI-ION 10-MLF |
| MIC809-5SYC3 | IC SUPERVISOR 2.93V VTH SC70 |
| MIC810TU TR | IC RESET GEN 3.08V VTH SOT23-3 |
| MIC8114TU TR | IC SUPERVISOR RESET 3.08V SOT143 |
| MIC8115TU TR | IC SUPERVISOR RESET 3.08V SOT143 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC708TYM TR | 功能描述:IC SUPERVISOR MPU 3.08V 8SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 监控器 系列:- 标准包装:1 系列:- 类型:简单复位/加电复位 监视电压数目:1 输出:开路漏极或开路集电极 复位:低有效 复位超时:标准传输延迟为 60 µs 电压 - 阀值:3V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:Digi-Reel® 其它名称:LM8364BALMF30DKR |
| MIC71004BM | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MIC7101BYM5 | 制造商:RF Micro Devices Inc 功能描述: |
| MIC7111 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:1.8V IttyBitty⑩ Rail-to-Rail Input/Output Op Amp Preliminary Information |
| MIC7111_05 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:1.8V IttyBitty Rail-to-Rail Input/Output Op Amp |
发布紧急采购，3分钟左右您将得到回复。