- 您现在的位置：买卖IC网 > PDF目录17167 > MIC79110BML TR (Micrel Inc)IC CHARGER BATT LI-ON ADJ 10MLF PDF资料下载
参数资料
| 型号： | MIC79110BML TR |
| 厂商： | Micrel Inc |
| 文件页数： | 12/15页 |
| 文件大小： | 0K |
| 描述： | IC CHARGER BATT LI-ON ADJ 10MLF |
| 标准包装： | 5,000 |
| 功能： | 充电管理 |
| 电池化学： | 锂离子（Li-Ion） |
| 电源电压： | 2.5 V ~ 16 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-VFDFN 裸露焊盘，10-MLF? |
| 供应商设备封装： | 10-MLF?（3x3） |
| 包装： | 带卷 (TR) |
| 其它名称： | MIC79110BMLTR |
Micrel, Inc.
Lithium-ion Batteries
Lithium-ion batteries are charged in two stages to reach
full capacity. The ?rst stage charges the bat tery with
maximum charge current until 90% of the battery cell’s
voltage limit is reached. The second stage tops off the
charge with constant voltage charge as the charge
current slowly decreases. End of charge is reached when
the current is less than 3% of the rated current. A third
stage will occasionally top off with charge with constant
voltage charge if the battery voltage drops below a
certain threshold.
MIC79110
The specifications of these safety circuits are dictated by
the cell manufacturer and may include the following:
? Reverse polarity protection.
? Charge temperature must not be charged when
temperature is lower than 0°C or above 45°C.
? Charge current must not be too high, typically below
0.7°C.
? Discharge current protection to prevent damage due to
short circuits.
? Protection circuitry for over voltage applied to the
battery terminals.
? Overcharge protection circuitry to stop charge when
the voltage per cell rises above 4.3V.
? Over discharge protection circuitry to stop discharge
when the battery voltage falls below 2.3V (varies with
manufacturer).
? Thermal shutdown protection for the battery if the
ambient temperature is above 100°C.
Auto Top-Off Charger Application Circuit
Figure 2. Typical Two-Stage Lithium Charge Profile
All lithium-ion batteries take approximately 3 hours to
charge with the second stage taking twice as long as the
first stage. Some chargers claim to be fast chargers by
skipping the second stage and just charges the battery
until the cell voltage is reached. This only charges the
battery to 70% capacity.
An increase in the charge current during stage 1 does not
shorten the total charge time. It will only shorten the time
for stage 1 to complete and lengthen the time in stage 2.
The lithium-ion loses charge due to aging whether it is
used or not. Do not store the batteries at full charge and
high heat because it will accelerate the aging process.
Try and store with 40% charge and in a cool
environment.
Lithium-ion Safety Precautions
Every lithium-ion battery pack should have a safety circuit
which monitors the charge and discharge of the pack and
prevents dangerous occurrences.
Figure 3. Auto Top-Off Charger ? Application Circuit
Lithium-ion batteries will begin to lose their charge over
time. The MIC79110 can be configured to automatically
recharge the battery when the voltage drops below the
minimum battery voltage. This minimum voltage is set by
a resistor divider at the battery and is connected to the
SD pin. For instance, if V BAT is 4.2V and the battery
voltage falls to 3.72V, SD pin gets divided down by R1
and R2 to 0.93V and starts the normal charging process.
While charging the DEOC indictor is turned on, pulling
the SD pin to GND, keeping the MIC79110 on. When the
end of charge is reached, the DEOC pin opens. The
divided down BAT voltage is now 1.05V at the SD pin,
ending the charging process.
May 21, 2013
12
052113-2.0 (while in progress)
Revision 2.0 (final document)
相关PDF资料 |
PDF描述 |
|---|---|
| R1S-3.305/HP-R | CONV DC/DC 1W 3.3VIN 05VOUT |
| R1S12-3.33.3/P-R | CONV DC/DC 1W 3.3VIN 3.3VOUT |
| R1S12-3.33.3/H-R | CONV DC/DC 1W 3.3VIN 3.3VOUT |
| V375C12C75BF3 | CONVERTER MOD DC/DC 12V 75W |
| LM4040C82IDBZT | IC VREF SHUNT PREC 8.192V SOT23 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC79110YML | 制造商:Rochester Electronics LLC 功能描述: 制造商:RF Micro Devices Inc 功能描述: 制造商:Micrel Inc 功能描述: |
| MIC79110YML TR | 功能描述:电池管理 1.2A Li-Ion Linear Battery Charger(Lead Free) RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| MIC79110YML-TR | 功能描述:IC CHARGER BATT LI-ON ADJ 10MLF 制造商:microchip technology 系列:- 包装:剪切带（CT） 零件状态:有效 电池化学:锂离子 电池数:- Current Charging:- 可编程特性:- 故障保护:过流，超温，反向电流 充电电流 - 最大值:1.2A Battery Pack Voltage:- 电压 -?供电（最高）:16V 接口:- 工作温度:-40°C ~ 125°C （TJ） 封装/外壳:10-VFDFN 裸露焊盘，10-MLF? 供应商器件封装:10-MLF?（3x3） 标准包装:1 |
| MIC-8 | 功能描述:保险丝 BUSS MIDGET FUSE RoHS:否 制造商:Littelfuse 产品:Surface Mount Fuses 电流额定值:0.5 A 电压额定值:600 V 保险丝类型:Fast Acting 保险丝大小/组:Nano 尺寸:12.1 mm L x 4.5 mm W 安装风格: 端接类型:SMD/SMT 系列:485 |
| MIC800 | 制造商:Behringer 功能描述:Ultra-Compact Microphone Modeling Preamplifier 制造商:BEHRINGER 功能描述:MICROPHONE PREAMPLIFIER PHANTOM POWER SUPPLY / MODELER |
发布紧急采购，3分钟左右您将得到回复。