参数资料
| 型号： | MIC913YM5 TR |
| 厂商： | Micrel Inc |
| 文件页数： | 4/13页 |
| 文件大小： | 0K |
| 描述： | IC OPAMP GP 350MHZ LP SOT23-5 |
| 标准包装： | 1 |
| 放大器类型： | 电压反馈 |
| 电路数： | 1 |
| 转换速率： | 500 V/µs |
| 增益带宽积： | 350MHz |
| -3db带宽： | 240MHz |
| 电流 - 输入偏压： | 5.5µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 4.2mA |
| 电流 - 输出 / 通道： | 90mA |
| 电压 - 电源，单路/双路(±)： | ±2.5 V ~ 9 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SC-74A，SOT-753 |
| 供应商设备封装： | SOT-23-5 |
| 包装： | 标准包装 |
| 其它名称： | 576-3692-6 |
Micrel, Inc.
MIC913
October 2007
12
M9999-101707
Application Information
The MIC913 is a high-speed, voltage-feedback opera-
tional amplifier featuring very low supply current. The
MIC913 is not unity-gain stable, it requires a minimum
gain of +2 or –1 to ensure stability. The device is
however stable even when driving high capacitance
loads.
Driving High Capacitance
The MIC913 is stable when driving any capacitance (see
“Typical Characteristics: Gain Bandwidth and Phase
Margin vs. Load Capacitance”) making it ideal for driving
long coaxial cables or other high-capacitance loads.
Phase margin remains constant as load capacitance is
increased. Most high-speed op amps are only able to
drive limited capacitance.
Note: increasing load capacitance does reduce
the speed of the device (see “Typical Character-
istics: Gain Bandwidth and Phase Margin vs.
Load”). In applications where the load capaci-
tance reduces the speed of the op amp to an
unacceptable level, the effect of the load capaci-
tance can be reduced by adding a small resistor
(<100) in series with the output.
Feedback Resistor Selection
Conventional op amp gain configurations and resistor
selection apply, the MIC913 is NOT a current feedback
device. Resistor values in the range of 1k to 10k are
recommended.
Layout Considerations
All high speed devices require careful PCB layout. The
high stability and high PSRR of the MIC913 make this op
amp easier to use than most, but the following guidelines
should be observed: Capacitance, particularly on the two
inputs pins will degrade performance; avoid large copper
traces to the inputs. Keep the output signal away from
the inputs and use a ground plane.
It is important to ensure adequate supply bypassing
capacitors are located close to the device.
Power Supply Bypassing
Regular supply bypassing techniques are recom-
mended. A 10F capacitor in parallel with a 0.1F
capacitor on both the positive and negative supplies are
ideal. For best performance all bypassing capacitors
should be located as close to the op amp as possible
and all capacitors should be low ESL (equivalent series
inductance),
ESR
(equivalent
series
resistance).
Surface-mount ceramic capacitors are ideal.
Thermal Considerations
The SOT-23-5 package, like all small packages, has a
high thermal resistance. It is important to ensure the IC
does not exceed the maximum operating junction (die)
temperature of 85°C. The part can be operated up to the
absolute maximum temperature rating of 125°C, but
between 85°C and 125°C performance will degrade, in
particular CMRR will reduce.
A MIC913 with no load, dissipates power equal to the
quiescent supply current * supply voltage.
PD(no load) = (VV+ – VV–)IS
When a load is added, the additional power is dissipated
in the output stage of the op amp. The power dissipated
in the device is a function of supply voltage, output
voltage and output current.
PD(output stage) = (VV+ – VV–)IOUT
Total Power Dissipation = PD(no load) + PD(output stage)
Ensure the total power dissipated in the device is no
greater than the thermal capacity of the package. The
SOT23-5 package has a thermal resistance of 260°C/W.
260W
T
n
Dissipatio
Power
Allowable
Max.
A(max)
J(max)
=
相关PDF资料 |
PDF描述 |
|---|---|
| MIC914YM5 TR | IC OPAMP GP 160MHZ LP SOT23-5 |
| MIC915BMM TR | IC OPAMP DUAL 135MHZ 10-MSOP |
| MIC916YQS | IC OPAMP TRIPLE 135MHZ 16-QSOP |
| MIC918BC5 TR | IC OPAMP 51MHZ HS LP SC70-5 |
| MIC919BC5 TR | IC OPAMP 27MHZ HS LP SC70-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MIC914 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:160MHz Low-Power SOT-23-5 Op Amp |
| MIC914_07 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:160MHz Low-Power SOT23-5 Op Amp |
| MIC914BM5 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MIC914BM5 TR | 功能描述:IC OPAMP 160MHZ HS LP SOT23-5 RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:IttyBitty® 标准包装:2,500 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:0.11 V/µs 增益带宽积:350kHz -3db带宽:- 电流 - 输入偏压:4nA 电压 - 输入偏移:20µV 电流 - 电源:260µA 电流 - 输出 / 通道:20mA 电压 - 电源，单路/双路(±):2.7 V ~ 36 V，±1.35 V ~ 18 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 供应商设备封装:8-SO 包装:带卷 (TR) |
| MIC914BM5TR | 制造商:Rochester Electronics LLC 功能描述:- Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。