- 您现在的位置：买卖IC网 > PDF目录80459 > ML9040A-AXXGA (LAPIS SEMICONDUCTOR CO LTD) 16 X 40 DOTS DOT MAT LCD DRVR AND DSPL CTLR, PQFP80 PDF资料下载
参数资料
| 型号： | ML9040A-AXXGA |
| 厂商： | LAPIS SEMICONDUCTOR CO LTD |
| 元件分类： | 显示控制器 |
| 英文描述： | 16 X 40 DOTS DOT MAT LCD DRVR AND DSPL CTLR, PQFP80 |
| 封装： | 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80 |
| 文件页数： | 17/50页 |
| 文件大小： | 465K |
| 代理商： | ML9040A-AXXGA |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页
ML9040A-Axx/-Bxx
Semiconductor
23/49
PEDL9040A-03
Cursor/Blink Control Circuit
This is a circuit that generates the LCD cursor and blink.
This circuit is under the control of the CPU program.
The display of the cursor and blink on the LCD is made at a position corresponding to the
DD RAM address that is set in the ADC.
The figure below shows an example of the cursor/blink position when the value of ADC
is set to "07" (hex.).
(Note) The cursor and blink are displayed even when the CG RAM address is set in the
ADC. For this reason, it is necessary to inhibit the cursor and blink display while
the CG RAM address is set in the ADC.
LCD Display Circuit (COM1 to COM16, SEG1 to SEG40, L, CP, DO, and DF)
As the ML9040A-Axx/-Bxx provides the COM signal outputs (16 outputs) and the SEG
signal outputs (40 outputs), it can display 8 characters (1-line display) or 16 characters (2-
line display) as a unit.
SEG1 to SEG40 are used to display 8-digit display on the LCD. To expand the display, an
MSM5259 is used.
The MSM5259, 40-dot segment driver, is used for expansion of the SEG signal output.
Interface with the MSM5259 is made through data output pin (DO), clock output pin (CP),
latch output pin (L), and display frequency pin (DF). The character pattern data is serially
transferred to MSM5259 through DO and CP. When the data of 72 characters 360-bit (= 5-
bit/ch. x 72 ch. = 1-line display) or 32 characters 160-bit (5-bit/ch. x 32 ch. = 2-line display)
is output, the latch pulse is also output through pin L. By this latch pulse, the data
transferred serially to MSM5259 is latched to be used as display data. The display
frequency signal (DF) required when LCD is displayed is also output from DF pin
synchronously with this latch pulse.
L
DB6
L
ADC
H
DB0
00
First
digit
01
2
02
3
05
4
04
5
In 1-line display mode
05
6
06
7
07
8
7
0
08
9
4E
79
4F
80
Cursor and blink position
00
First
digit
01
2
02
3
03
4
04
5
First line
05
6
06
7
07
8
08
9
26
39
27
40
41
42
43
44
Second line
45
46
47
48
66
67
Cursor and blink position
In 2-line display mode
相关PDF资料 |
PDF描述 |
|---|---|
| MSM6255GS-BK | 128 X 256 CHARACTERS DOT MAT LCD DSPL CTLR, PQFP80 |
| MB95F108AJSPMC1 | 16-BIT, FLASH, 16.25 MHz, RISC MICROCONTROLLER, PQFP64 |
| MB89537APMC1 | MICROCONTROLLER, PQFP64 |
| MC9S12XF128J0VLH | MICROCONTROLLER, PQFP64 |
| MC9S12XF256J0MLMR | MICROCONTROLLER, PQFP112 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ML9040A-B01GAZ03A-7 | 功能描述:LCD 驱动器 LCD DOT Matrix Controller, 16/40 RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| ML9040A-BXX | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER |
| ML9040A-BXXGA | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER |
| ML9040A-BXXWA | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER |
| ML9040-AXX | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER WITH 16-DOT COMMON DRIVER AND 40-DOT SEGMENT DRIVER |
发布紧急采购，3分钟左右您将得到回复。