- 您现在的位置：买卖IC网 > PDF目录80580 > ML9041A-XXACVWA (OKI ELECTRIC INDUSTRY CO LTD) 17 X 100 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC189 PDF资料下载
参数资料
| 型号： | ML9041A-XXACVWA |
| 厂商： | OKI ELECTRIC INDUSTRY CO LTD |
| 元件分类： | 显示控制器 |
| 英文描述： | 17 X 100 DOTS DOT MAT LCD DRVR AND DSPL CTLR, UUC189 |
| 封装： | 10.62 X 2.55 MM, GOLD BUMP, DIE-189 |
| 文件页数： | 11/64页 |
| 文件大小： | 653K |
| 代理商： | ML9041A-XXACVWA |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页当前第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页
PEDL9041A-02
OKI Semiconductor
ML9041A-xxA/xxB
19/64
Character Generator RAM (CGRAM)
The CGRAM is used to generate user-specific character patterns that are not in the CGROM. CGRAM (64 bytes =
512 bits) can store up to 8 small character patterns (5
× 8 dots) or up to 4 large character patterns (5 × 11 dots).
When displaying a character pattern stored in the CGRAM, write an 8-bit character code (00 to 07 or 08 to 0F;
hex.) assigned in Table 2 to the DDRAM. This enables outputting the character pattern to the LCD display
position corresponding to the DDRAM address.
The cursor or blink is also displayed even when a CGRAM or ABRAM address is set in the ADC. Therefore, the
cursor or blink display should be inhibited while the ADC is holding a CGRAM or ABRAM address.
The following describes how character patterns are written in and read from the CGRAM.
1) Small character patterns (5
× 8 dots) (See Table 3-1.)
(1)
A method of writing character patterns to the CGRAM from the CPU
The three CGRAM address bit weights 0 to 2 select one of the lines constituting a character pattern.
First, set the mode to increment or decrement from the CPU, and then input the CGRAM address.
Write each line of the character pattern in the CGRAM through DB
0 to DB7.
The data lines DB
0 to DB7 correspond to the CGRAM data bit weights 0 to 7, respectively (see Table 3-
1). Input data “1” represents the ON status of an LCD dot and “0” represents the OFF status. Since the
ADC is automatically incremented or decremented by 1 after the data is written to the CGRAM, it is not
necessary to set the CGRAM address again.
The bottom line of a character pattern (the CGRAM address bit weights 0 to 2 are all “1”, which means 7
in hexadecimal) is the cursor line. The ON/OFF pattern of this line is ORed with the cursor pattern for
displaying on the LCD. Therefore, the pattern data for the cursor position should be all zeros to display
the cursor.
Whereas the data given by the CGRAM data bit weights 0 to 4 is output to the LCD as display data, the
data given by the CGRAM data bit weights 5 to 7 is not. Therefore, the CGRAM data bit weights 5 to 7
can be used as a RAM area.
(2)
A method of displaying CGRAM character patterns on the LCD
The CGRAM is selected when the higher-order 4 bits of a character code are all zeros. Since bit weight 3
of a character code is not used, the character pattern “0” in Table 3-1 can be selected using the character
code “00” or “08” in hexadecimal.
When the 8-bit character code corresponding to a character pattern in the CGRAM is written to the
DDRAM, the character pattern is displayed in the display position specified by the DDRAM address.
(The DDRAM data bit weights 0 to 2 correspond to the CGRAM address bit weights 3 to 5, respectively.)
相关PDF资料 |
PDF描述 |
|---|---|
| MC68HC11L6CFU3 | 8-BIT, MROM, 3 MHz, MICROCONTROLLER, PQFP64 |
| MB89538CPFM | 8-BIT, MROM, 12.5 MHz, MICROCONTROLLER, PQFP64 |
| MB89F538L-201PV4 | 8-BIT, FLASH, 12.5 MHz, MICROCONTROLLER, PQCC64 |
| MB90552BPFV | 16-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP100 |
| MSM80C51F-XXXGS | 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ML9041A-XXBCVWA | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER |
| ML9042 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER |
| ML9042-54CVWA-5016 | 制造商:ROHM Semiconductor 功能描述:RHOML9042-54CVWA-5016 OKI LCD DRIVER |
| ML9044 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER |
| ML9044A | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:DOT MATRIX LCD CONTROLLER DRIVER |
发布紧急采购，3分钟左右您将得到回复。