- 您现在的位置：买卖IC网 > PDF目录382329 > MM5452N (NATIONAL SEMICONDUCTOR CORP) Liquid Crystal Display Drivers PDF资料下载
参数资料
| 型号： | MM5452N |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 显示驱动器 |
| 英文描述： | Liquid Crystal Display Drivers |
| 中文描述： | LIQUID CRYSTAL DISPLAY DRIVER, PDIP40 |
| 封装： | DIP-40 |
| 文件页数： | 6/8页 |
| 文件大小： | 190K |
| 代理商： | MM5452N |
Functional Description
(Continued)
TL/F/6137–7
*
The minimum recommended value for R for the oscillator input is 9 k
X
. An RC time constant of approximately
4.91
c
10
b
4
should produce a backplane frequency between 30 Hz and 150 Hz.
FIGURE 6. Parallel Backplane Outputs
TL/F/6137–8
FIGURE 7. External Backplane Clock
Figure 8 shows a four wire remote display that takes advan-
tage of the device’s serial input to move many bits of display
information on a few wires.
USING AN EXTERNAL CLOCK
The MM5452/MM5453 LCD Drivers can be used with an
externally supplied clock, provided it has a duty cycle of
50%. Deviations from a 50% duty cycle result in an offset
voltage on the LCD. InFigure 7, a flip-flop is used to assure
a 50% duty cycle. The oscillator input is grounded to pre-
vent oscillation and reduce current consumptions in the
chips. The oscillator is not used.
Using an external clock allows synchronizing the display
drive with AC power, internal clocks, or DVM integration
time to reduce interference from the display.
Figure 9 is a general block diagram that shows how the
device’s serial input can be used to advantage in an analog
display. The analog voltage input is compared with a stair-
case voltage generated by a counter and a digital-to-analog
converter or resistor array. The result of this comparison is
clocked into the MM5452, MM5453. The next clock pulse
increments the staircase and clocks the new data in.
With a buffer amplifier, the same staircase waveform can be
used for many displays. The digital-to-analog converter
need not be linear; logarithmic or other non-linear functions
can be displayed by using weighted resistors or special
DACs. This system can be used for status indicators, spec-
trum analyzers, audio level and power meters, tuning indica-
tors, and other applications.
6
相关PDF资料 |
PDF描述 |
|---|---|
| MM5452V | Liquid Crystal Display Drivers |
| MM5453 | Liquid Crystal Display Drivers |
| MM5453N | Liquid Crystal Display Drivers |
| MM5453V | Liquid Crystal Display Drivers |
| MM5457 | DIGITAL ALARM CLOCKS |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MM5452N | 制造商:Texas Instruments 功能描述:LCD DRIVER 33 SEGMENT 5452 DIP40 |
| MM5452N/NOPB | 功能描述:LCD 驱动器 LIQUID CRYSTAL DISPLAY DRIVER RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
| MM5452V | 功能描述:显示驱动器和控制器 RoHS:否 制造商:Panasonic Electronic Components 工作电源电压:2.7 V to 5.5 V 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:QFN-44 封装:Reel |
| MM5452V | 制造商:Texas Instruments 功能描述:LCD DISPLAY DRIVER 5452 PLCC44 |
| MM5452V/NOPB | 功能描述:LCD 驱动器 Liq Crystal Display Drivers RoHS:否 制造商:Maxim Integrated 数位数量:4.5 片段数量:30 最大时钟频率:19 KHz 工作电源电压:3 V to 3.6 V 最大工作温度:+ 85 C 最小工作温度:- 20 C 封装 / 箱体:PDIP-40 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。