MPC9865
Rev 2, May/2006
Freescale Semiconductor
Technical Data
Freescale Semiconductor, Inc., 2005. All rights reserved.
Advance Information
Clock Generator for PowerQUICC III
The MPC9865 is a PLL based clock generator specifically designed for
Freescale Microprocessor and Microcontroller applications including the
PowerPC and PowerQUICC. This device generates a microprocessor input
clock. The microprocessor clock is selectable in output frequency to any of the
commonly used microprocessor input and bus frequencies. The device offers
eight low skew clock outputs in two banks, each configurable to support different
clock frequencies. The extended temperature range of the MPC9865 supports
telecommunication and networking requirements.
Features
8 LVCMOS outputs for processor and other circuitry
Crystal oscillator or external reference input
25 or 33 MHz Input reference frequency
Selectable output frequencies include = 200, 166, 133,125, 111, 100, 83, 66,
50, 33, or 16 MHz
Buffered reference clock output (2 copies)
Low cycle-to-cycle and period jitter
100-lead PBGA package
100-lead Pb-free package available
3.3 V supply with 3.3 V or 2.5 V LVCMOS output supplies
Supports computing, networking, telecommunications applications
Ambient temperature range –40°C to +85°C
Functional Description
The MPC9865 uses either a 25 or 33 MHz reference frequency to generate 8 LVCMOS output clocks, of which, the frequency
is selectable from 16 MHz to 200 MHz. The reference is applied to the input of a PLL and multiplied to 2 GHz. Output dividers,
divide this frequency by 10, 12, 15, 16, 18, 20, 24, 30, 40, 60, or 120 to produce output frequencies of 200, 166, 133, 125, 111,
100, 83, 66, 50, 33, or 16 MHz. The single-ended LVCMOS outputs provide 8 low skew outputs for use in driving a microprocessor
or microcontroller clock input as well as other system components. The input reference, either crystal or external input is also
buffered to a separate dual outputs that my be used as the clock source for a Ethernet PHY if desired.
The reference clock may be provided by either an external clock input of 25 or 33 MHz. An internal oscillator requiring a
25 MHz crystal for frequency control may also be used. The external clock source my be applied to either of two clock inputs and
selected via the CLK_SEL control input. Both single ended LVCMOS and differential LVPECL inputs are available. The crystal
oscillator or external clock input is selected via the input pin of XTAL_SEL. Other than the crystal, no external components are
required for crystal oscillator operation. The REF_33 MHz configuration pin is used to select between a 33 and 25 MHz input
frequency.
The MPC9865 is packaged in a 100 lead MAPBGA package to optimize both performance and board density.
MPC9865
MICROPROCESSOR
CLOCK GENERATOR
SCALE 2 1
VF SUFFIX
VM SUFFIX (PB-FREE)
100 MAPBGA PACKAGE
CASE 1462-01
DATA SHEET
MPC9865
IDT Clock Generator for PowerQUICC III
Freescale Timing Solutions Organization has been acquired by Integrated Device Technology, Inc
MPC9865
1
Clock Generator for PowerQUICC III