参数资料
| 型号： | MPM-DC-KIT |
| 厂商： | Microsemi SoC |
| 文件页数： | 2/12页 |
| 文件大小： | 0K |
| 描述： | DAUGHTER CARD SMARTFUSION MPM |
| 标准包装： | 1 |
| 主要目的： | 电源管理，混合信号 |
| 已用 IC / 零件： | SmartFusion? 工具包 |
| 主要属性： | 四稳压器 |
| 次要属性： | 状态 LED |
| 已供物品： | 板 |
| 其它名称： | 1100-1149 |
Mixed Signal Power Manager (MPM) for Fusion
Block Diagram
OLED Power Supply Voltage Display
Reg 1 LED
D1 LED
Fusion FPGA
Ch 1 Flag
Power Enable Ch 1
Reg 1
3.3 V
V OUT 1
Rail 1 Voltage
Reg 4 LED
Power Enable Ch 4
Reg 4
5.0 V
V OUT 4
MPM Processor
Rail 4 Voltage
Reg 5
D12 LED
3.3 V
V OUT 5
Ch 12 Flag
Rail 5 Voltage
Power Enable 6–16
Ch 13–16 Flags
Analog In 6–16
MPM Configuration Registers (NVM)
JTAG
Fusion Advanced Development Kit Board
Interface
Figure 1-1 ? Block Diagram
Description
Actel’s Mixed Signal Power Manager leverages the ground-breaking Actel Fusion ? mixed signal FPGA to deliver
superior power monitoring, power sequencing, closed-loop trimming, and power-up and power-down control
of up to 30 external power supplies. Designers do not need to deal with FPGA design tools to configure power
management sequencing levels or thresholds; the MPM design is programmed into the Fusion device through
an easy-to-use, standalone graphical user interface (GUI). The MPM GUI enables users to configure power
management for up to 30 external power supplies and drive output signals as the monitored voltages meet or
deviate from the user-programmed operating limits, all without reprogramming the FPGA. MPM reduces the
total parts count at the board level, increases system reliability by eliminating the single points of failure, and
delivers highly configurable, integrated power management using the highly-reliable, flash-based Fusion mixed
signal FPGAs.
Using the MPM GUI, users can configure all MPM input and output requirements by writing values to the Fusion
device's nonvolatile memory (NVM), using a low-cost programming stick (LCPS) via the joint test action group
(JTAG) or inter-integrated circuit (I 2 C) interfaces. The MPM GUI enables quick and easy setting of all threshold
flag levels, output signals, power-sequencing, and debug level settings for the MPM power management
operation. These settings can be quickly altered and reloaded from the GUI, allowing rapid validation in the
functional hardware of all selections, settings, and sequencing without a necessity to reprogram the FPGA
circuitry. All digital flag outputs are also definable via the GUI, allowing the monitoring of any condition or
state for external use at the board level.
2
v2.0
相关PDF资料 |
PDF描述 |
|---|---|
| MPS-08-7.70-01-L-V | CONN SOCKET 5MM 8POS GOLD |
| MPT-02-01-01-L-RA-LC | CONTACT HDR 5MM 2POS |
| MPT-08-6.30-01-L-V | CONTACT HDR 5MM 8POS |
| MQ 100 | FUSE 100MA 125V FAST AXL BULK MQ |
| MRF 800 AMMO | FUSE 800MA 250V FAST AMMO MRF |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MP-M-G | 制造商:PATLITE Corporation 功能描述:30MM MP LED MODULE, PNP AND NPN OPEN COLLECTOR COMPATIBLE (GREEN) 制造商:PATLITE Corporation 功能描述:GREEN LED MODULE |
| MPMH38-D0 | 功能描述:电缆束带 Masonry Push Mount, Heavy, .38" (9.7mm) RoHS:否 制造商:Phoenix Contact 产品:Cable Tie Mounts 类型:Adhesive 颜色:Black 材料:Acrylonitrile Butadiene Styrene (ABS) 长度:19 mm 宽度:19 mm 抗拉强度: |
| MPMH38-L0 | 功能描述:电缆束带 Masonry Push Mount Heavy .38" (9.7mm) RoHS:否 制造商:Phoenix Contact 产品:Cable Tie Mounts 类型:Adhesive 颜色:Black 材料:Acrylonitrile Butadiene Styrene (ABS) 长度:19 mm 宽度:19 mm 抗拉强度: |
| MPMI2404-3-RPC | 制造商:PCTEL 功能描述:ANTENNA UNIT |
| MPMI2458-4-RPC | 制造商:PCTEL 功能描述:ANTENNA UNIT |
发布紧急采购，3分钟左右您将得到回复。