- 您现在的位置：买卖IC网 > PDF目录17989 > MPZ0603S330C (TDK Corporation)FERRITE CHIP BEAD 33 OHM 0201 PDF资料下载
参数资料
| 型号： | MPZ0603S330C |
| 厂商： | TDK Corporation |
| 文件页数： | 2/23页 |
| 文件大小： | 0K |
| 描述： | FERRITE CHIP BEAD 33 OHM 0201 |
| 标准包装： | 1 |
| 系列： | MPZ |
| 频率对应阻抗： | 33 欧姆 @ 100MHz |
| 额定电流： | 750mA |
| DC 电阻(DCR)： | 最大 90 毫欧 |
| 滤波器类型： | 差模 - 单线 |
| 封装/外壳： | 0201（0603 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 高度（最大）： | 0.013"（0.33mm） |
| 尺寸/尺寸： | 0.024" L x 0.012" W（0.60mm x 0.30mm） |
| 其它名称： | 445-7794-6 |
(2/23)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20131204 / beads_commercial_power_mpz_en.fm
相关PDF资料 |
PDF描述 |
|---|---|
| 3314G-1-501E | TRIMMER 500 OHM 0.25W SMD |
| CD5EC820JO3F | CAP MICA 82PF 300V 5% RADIAL |
| KSK-1A85-3040 | SWITCH REED 1000VDC 100W AXL |
| MCM01-002D300J-F | CAP MICA 30PF 500V 5% SMD |
| PV36W103C01B00 | TRIMMER 10K OHM 0.5W TH |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MPZ0603S330CT000 | 功能描述:33 Ohm Impedance Ferrite Bead 0201 (0603 Metric) Surface Mount Power Line 750mA 1 Lines 90 mOhm Max DCR -55°C ~ 125°C 制造商:tdk corporation 系列:MPZ 包装:剪切带（CT） 零件状态:有效 滤波器类型:电源线 线路数:1 不同频率时的阻抗:33 欧姆 @ 100MHz 额定电流（最大）:750mA 直流电阻（DCR）（最大）:90 毫欧 等级:- 工作温度:-55°C ~ 125°C 封装/外壳:0201（0603 公制） 安装类型:表面贴装 高度（最大值）:0.013"（0.33mm） 大小/尺寸:0.024" 长 x 0.012" 宽（0.60mm x 0.30mm） 标准包装:1 |
| MPZ0603S470C | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 47ohms @ 100MHz .12ohm 500mA RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| MPZ0603S470CT000 | 功能描述:47 Ohm Impedance Ferrite Bead 0201 (0603 Metric) Surface Mount Power Line 500mA 1 Lines 120 mOhm Max DCR -55°C ~ 125°C 制造商:tdk corporation 系列:MPZ 包装:剪切带（CT） 零件状态:有效 滤波器类型:电源线 线路数:1 不同频率时的阻抗:47 欧姆 @ 100MHz 额定电流（最大）:500mA 直流电阻（DCR）（最大）:120 毫欧 等级:- 工作温度:-55°C ~ 125°C 封装/外壳:0201（0603 公制） 安装类型:表面贴装 高度（最大值）:0.013"（0.33mm） 大小/尺寸:0.024" 长 x 0.012" 宽（0.60mm x 0.30mm） 标准包装:1 |
| MPZ1005 | 制造商:TDK 制造商全称:TDK Electronics 功能描述:Chip Beads(SMD) For Power Line |
| MPZ1005A151ET000 | 功能描述:150 Ohm Impedance Ferrite Bead 0402 (1005 Metric) Surface Mount Power Line 800mA 1 Lines 180 mOhm Max DCR -55°C ~ 125°C 制造商:tdk corporation 系列:MPZ-E 包装:剪切带（CT） 零件状态:有效 滤波器类型:电源线 线路数:1 不同频率时的阻抗:150 欧姆 @ 100MHz 额定电流（最大）:800mA 直流电阻（DCR）（最大）:180 毫欧 等级:- 工作温度:-55°C ~ 125°C 封装/外壳:0402（1005 公制） 安装类型:表面贴装 高度（最大值）:0.022"（0.55mm） 大小/尺寸:0.039" 长 x 0.020" 宽（1.00mm x 0.50mm） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。