- 您现在的位置：买卖IC网 > PDF目录17998 > MPZ2012S101A (TDK Corporation)FERRITE CHIP 100 OHM 4A 0805 PDF资料下载
参数资料
| 型号： | MPZ2012S101A |
| 厂商： | TDK Corporation |
| 文件页数： | 2/23页 |
| 文件大小： | 0K |
| 描述： | FERRITE CHIP 100 OHM 4A 0805 |
| 产品培训模块： | EMC Components |
| RoHS指令信息： | RoHS Material |
| 产品目录绘图： | (MMZ,MPZ)2012 Series Top (MMZ,MPZ)2012 Series Footprint (MMZ,MPZ)2012 Series Side |
| 标准包装： | 1 |
| 系列： | MPZ |
| 频率对应阻抗： | 100 欧姆 @ 100MHz |
| 额定电流： | 4A |
| DC 电阻(DCR)： | 最大 20 毫欧 |
| 滤波器类型： | 差模 - 单线 |
| 封装/外壳： | 0805（2012 公制） |
| 安装类型： | 表面贴装 |
| 包装： | 标准包装 |
| 高度（最大）： | 0.041"（1.05mm） |
| 尺寸/尺寸： | 0.079" L x 0.049" W（2.00mm x 1.25mm） |
| 产品目录页面： | 1849 (CN2011-ZH PDF) |
| 其它名称： | 445-1567-6 |
(2/23)
E M C
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using these products.
REMINDERS
The storage period is less than 12 months. Be sure to follow the storage conditions (Temperature: 5 to 40°C, Humidity: 10 to 75% RH
or less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications
equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement
equipment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or
quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to
society, person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/Aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing
protection circuit/device or providing backup circuits in your equipment.
001-01 / 20131204 / beads_commercial_power_mpz_en.fm
相关PDF资料 |
PDF描述 |
|---|---|
| 3314J-1-101E | TRIMMER 100 OHM 0.25W SMD |
| MPG206R | SWITCH PUSHBUTTON DPDT 6A 125V |
| 171104K630N-F | CAP FILM 0.1UF 630VDC RADIAL |
| FLEX-14 20-25 | SWITCH MAG REED SPST 10W 20-25AT |
| SMDSWLF.020 4OZ | SLD WIRE NO-CLEAN 96.5/3/.5 4OZ. |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MPZ2012S101AT | 制造商:TDK Innoveta 功能描述:Ferrite Beads Multi-Layer Chip Bead 100Ohm 25% 100MHz 4A 0805 T/R |
| MPZ2012S101AT000 | 制造商:TDK 功能描述: |
| MPZ2012S101ATD25 | 制造商:TDK 功能描述:FERRITE CHIP BEADS - Tape and Reel |
| MPZ2012S102A | 功能描述:电磁干扰滤波珠子、扼流圈和阵列 0805 1000ohms 100MHz Rdc 0.15ohms 1.5A RoHS:否 制造商:AVX 阻抗: 最大直流电流:35 mA 最大直流电阻: 容差: 端接类型:SMD/SMT 电压额定值:25 V 工作温度范围:- 25 C to + 85 C 封装 / 箱体:0603 (1608 metric) |
| MPZ2012S102AT | 制造商:TDK 功能描述:Ferrite Beads Multi-Layer Chip Bead 1KOhm 25% 100MHz 1.5A 0805 制造商:TDK 功能描述:MPZ Series 1 kO 25 % 100 MHz 1.5 A 0805 Multi-Layer Chip Ferrite Bead 制造商:TDK 功能描述:MPZ Series 1 kO ?25 % 100 MHz 1.5 A 0805 Multi-Layer Chip Ferrite Bead |
发布紧急采购，3分钟左右您将得到回复。