参数资料
型号: MS3100F20-33P
厂商: Amphenol Industrial Operations
文件页数: 62/73页
文件大小: 0K
描述: CONN RCPT 11POS WALL MNT W/PINS
产品培训模块: 26482 Series 1 Miniature Cylindrical Connector
Mil-DTL-5015 and AC Threaded Connectors
标准包装: 1
系列: 军用, MIL-DTL-5015
连接器类型: 插座,公形引脚
位置数: 11
外壳尺寸 - 插件: 20-33
安装类型: 面板安装,法兰
端子: 焊杯
紧固型: 有螺纹
方向: N(正常型)
防护等级: 抗环境影响
外壳材料,表面处理: 铝,镀草绿色镉
触点表面涂层:
特点: 应力消除
包装: 散装
电压 - 额定: 500VAC,700VDC
工作温度: -55°C ~ 125°C
配套产品: AMS3106F20-33S-ND - CONN PLUG 11POS STRAIGHT W/SCKT
其它名称: MS3100F20-33P-ND
Assembly Instructions
for 10-305200 & 10-74900 cable clamps
The 10-305200 cable clamp and MS3420A sleeve illustrated are used only on
the rear of MS-A or C type connectors. The 10-74900 clamp and grommet
assembly can only be used on special feed-thru applications involving dummy
shells, part numbers 10-37090 and 10-113276.
10-305200 Cable Clamp & MS3420A Sleeve
ASSEMBLY
Both clamps are shipped from the factory with lubricant
conforming to MIL-G-3278. Remove any dirt or foreign
material from components with ethyl alcohol and relubri-
4
3
2
1
cate as outlined under “lubrication.” Place the clamping
nut (1) on the wire bundle or cable with the threads facing
toward the connector or dummy shell. Position the
tapered sleeve (2) on the bundle or cable with the narrow
portion toward the clamping nut (1). Next install either the
gland (3) used with the 10-305200 clamp or thread each
wire through the grommet (3) used with the 10-74900
1. Clamping Nut
2. Tapered Sleeve
3. Gland
4. Reducing or
Telescoping Sleeve
10-74900 Clamp and Grommet Assembly
clamp. Dependent on the application, the wire bundle or
cable is fed through the dummy shell, or the wire ends
are soldered to the connector contacts. Move the compo-
nents forward in the reverse order of preliminary assem-
bly. (In applications where grommets (3) are used, seat
the grommet against the undercut in the back shell
before bringing the tapered sleeve (2) up against it).
Insure proper positioning of glands (3) or grommets (3),
tapered sleeves (2) and clamping nuts (1). Tighten the
clamp using a strap wrench until a metal to metal seat is
obtained.
3
2
1
1. Clamping Nut
2. Tapered Sleeve
3. Grommet
61
相关PDF资料
PDF描述
IDT72285L15PF IC FIFO 65536X18 LP 15NS 64-TQFP
MAX159BEUA+ IC ADC 10BIT 108KSPS 8-UMAX
ISL3176EIUZ-T7A IC TXRX RS485/422 ESD 10MSOP
IDT72V291L20TF IC FIFO SS 32768X36 20NS 64QFP
MAX157ACUA+ IC ADC 10BIT 108KSPS 2CH 8-UMAX
相关代理商/技术参数
参数描述
MS3100F2033S 制造商:ITT Interconnect Solutions 功能描述:Conn MIL-C-5015 Circular SKT 11 POS Solder ST Wall Mount 11 Terminal 1 Port
MS3100F20-33S 功能描述:CONN RCPT 11POS WALL MNT W/SCKT RoHS:否 类别:连接器,互连式 >> 圆形 系列:军用, MIL-DTL-5015 标准包装:25 系列:Multi-Con-X® 连接器类型:插头,公引脚 位置数:8 外壳尺寸 - 插件:- 外壳尺寸,MIL:- 安装类型:自由悬挂 端子:焊杯 紧固型:插销锁 方向:带标记 防护等级:防风雨型 外壳材料,表面处理:尼龙 触点表面涂层:金 特点:- 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:600V 工作温度:-40°C ~ 115°C 配套产品:4292-8SG-3ES-ND - CONN RCPT 8POS PNL MNT SKT4292-8SG-300-ND - CONN RCPT 8POS PNL MNT SKT5282-8SG-530-ND - CONN RCPT 8POS CABLE SKT5282-8SG-528-ND - CONN RCPT 8POS CABLE SKT5282-8SG-524-ND - CONN RCPT 8POS CABLE SKT5282-8SG-521-ND - CONN RCPT 8POS CABLE SKT5282-8SG-518-ND - CONN RCPT 8POS CABLE SKT5282-8SG-515-ND - CONN RCPT 8POS CABLE SKT5282-8SG-330-ND - CONN RCPT 8POS CABLE SKT5282-8SG-328-ND - CONN RCPT 8POS CABLE SKT更多... 相关产品:4283-24-ND - MULTI CON-X GROMMET4282SW-ND - MULTI COUPLING RING4482-ND - WINGED COUPLING NUT MULTI-CON-X4290-ND - O-RING MULTI-CON-X
MS3100F20-3P 制造商:Spacecraft Components Corp 功能描述:Conn, Circ, MIL-5015, Recpt, Metal, Str, Sldr, 20 Sz, 3 #12 Socket Cnts, WallMnt 制造商:ITT Interconnect Solutions 功能描述:CONN 5015 CIRC PIN 3 POS SLDR ST WALL MNT - Bulk 制造商:ITT Interconnect Solutions 功能描述:CONN RCPT 3POS WALL MNT W/PINS 制造商:Amphenol Corporation 功能描述:ER 3C 3#12 PIN RECP 制造商:ITT Interconnect Solutions 功能描述:ER 3C 3#12 SKT RECP WALL
MS3100F20-3PW 制造商:ITT Interconnect Solutions 功能描述:CONN 5015 CIRC PIN 3 POS SLDR ST WALL MNT - Bulk
MS3100F20-3PX 制造商:ITT Interconnect Solutions 功能描述:CONN 5015 CIRC PIN 3 POS SLDR ST WALL MNT - Bulk