参数资料
型号: MS3102E36-17S
厂商: Amphenol Industrial Operations
文件页数: 62/73页
文件大小: 0K
描述: CONN RCPT 47POS BOX MNT W/SCKT
产品培训模块: 26482 Series 1 Miniature Cylindrical Connector
Mil-DTL-5015 and AC Threaded Connectors
标准包装: 1
系列: MIL-5015 衍生
连接器类型: 插座,母形插口
位置数: 47
外壳尺寸 - 插件: 36-17
安装类型: 面板安装,法兰
端子: 焊杯
紧固型: 有螺纹
方向: N(正常型)
防护等级: 抗环境影响
外壳材料,表面处理: 铝,镀草绿色镉
触点表面涂层:
包装: 散装
电压 - 额定: 500VAC,700VDC
工作温度: -55°C ~ 125°C
其它名称: MS3102E36-17S-ND
Assembly Instructions
for 10-305200 & 10-74900 cable clamps
The 10-305200 cable clamp and MS3420A sleeve illustrated are used only on
the rear of MS-A or C type connectors. The 10-74900 clamp and grommet
assembly can only be used on special feed-thru applications involving dummy
shells, part numbers 10-37090 and 10-113276.
10-305200 Cable Clamp & MS3420A Sleeve
ASSEMBLY
Both clamps are shipped from the factory with lubricant
conforming to MIL-G-3278. Remove any dirt or foreign
material from components with ethyl alcohol and relubri-
4
3
2
1
cate as outlined under “lubrication.” Place the clamping
nut (1) on the wire bundle or cable with the threads facing
toward the connector or dummy shell. Position the
tapered sleeve (2) on the bundle or cable with the narrow
portion toward the clamping nut (1). Next install either the
gland (3) used with the 10-305200 clamp or thread each
wire through the grommet (3) used with the 10-74900
1. Clamping Nut
2. Tapered Sleeve
3. Gland
4. Reducing or
Telescoping Sleeve
10-74900 Clamp and Grommet Assembly
clamp. Dependent on the application, the wire bundle or
cable is fed through the dummy shell, or the wire ends
are soldered to the connector contacts. Move the compo-
nents forward in the reverse order of preliminary assem-
bly. (In applications where grommets (3) are used, seat
the grommet against the undercut in the back shell
before bringing the tapered sleeve (2) up against it).
Insure proper positioning of glands (3) or grommets (3),
tapered sleeves (2) and clamping nuts (1). Tighten the
clamp using a strap wrench until a metal to metal seat is
obtained.
3
2
1
1. Clamping Nut
2. Tapered Sleeve
3. Grommet
61
相关PDF资料
PDF描述
VI-27Z-MX-F4 CONVERTER MOD DC/DC 2V 30W
VE-BW4-MV-S CONVERTER MOD DC/DC 48V 150W
X9317TM8T1 IC XDCP 100TAP 100K 3WIRE 8-MSOP
M83723/76A24617 CONN PLUG 61POS STRAIGHT W/PINS
IDTQS3VH800QG IC BUS SWITCH 10BIT 24-QSOP
相关代理商/技术参数
参数描述
MS3102E36-18P 功能描述:CONN RCPT 31POS BOX MNT W/PINS RoHS:否 类别:连接器,互连式 >> 圆形 系列:MIL-5015 衍生 标准包装:1 系列:军用,MIL-C-83723 系列 III 连接器类型:插座,公形引脚 位置数:14 外壳尺寸 - 插件:18-14 外壳尺寸,MIL:- 安装类型:面板安装,法兰 端子:压接 紧固型:插销锁 方向:8 防护等级:IP67 - 防尘,防水 外壳材料,表面处理:铝,镀草绿色镉 触点表面涂层:金 特点:- 包装:散装 触点涂层厚度:50µin(1.27µm) 额定电流:13A 电压 - 额定:- 工作温度:-55°C ~ 200°C 其它名称:DM83723/72W18148
MS3102E36-18S 功能描述:CONN RCPT 31POS BOX MNT W/SCKT RoHS:否 类别:连接器,互连式 >> 圆形 系列:MIL-5015 衍生 产品培训模块:Mil-DTL-5015 and AC Threaded Connectors 标准包装:1 系列:军用, MIL-DTL-5015 连接器类型:插头,公引脚 位置数:9 外壳尺寸 - 插件:24-11 外壳尺寸,MIL:- 安装类型:自由悬挂 端子:压接 紧固型:有螺纹 方向:N(正常型) 防护等级:防水 外壳材料,表面处理:不锈钢 触点表面涂层:银 特点:- 包装:散装 触点涂层厚度:- 额定电流:- 电压 - 额定:500VAC,700VDC 工作温度:-55°C ~ 125°C 相关产品:APC1376-ND - STRAIN RELIEF STRGHT SHELL SZ 24APC1299-ND - STRAIN RELIEF 90 DEG SHELL SZ 24APC1443-ND - STRAIN RELIEF STR SL SHELL SZ 24APC1531-ND - STRAIN REL 90 DEG SL SHELL SZ 24 其它名称:MS3456LS24-11P-ND
MS3102E36-1P 功能描述:CONN RCPT 22POS BOX MNT W/PINS RoHS:否 类别:连接器,互连式 >> 圆形 系列:MIL-5015 衍生 标准包装:1 系列:军用, MIL-DTL-38999 系列 I 连接器类型:插座,公形引脚 位置数:18 外壳尺寸 - 插件:15-18 外壳尺寸,MIL:- 安装类型:面板安装,法兰 端子:压接 紧固型:插销锁 方向:N(正常型) 防护等级:抗环境影响 外壳材料,表面处理:镍,草绿色,镀镉 触点表面涂层:金 特点:屏蔽 包装:散装 触点涂层厚度:50µin(1.27µm) 额定电流:7.5A 电压 - 额定:600VAC,850VDC 工作温度:-65°C ~ 175°C 配套产品:AMS27467T15B18S-ND - CONN PLUG 18POS STRAIGHT W/SCKTAMS27467P15B18S-ND - CONN PLUG 18POS STRAIGHT W/SCKTAMS27467E15B18S-ND - CONN PLUG 18POS STRAIGHT W/SCKT 其它名称:MS27466T15B18P-ND
MS3102E36-1PW 制造商:Amphenol Corporation 功能描述:CONN MIL-DTL-5015 CIRC PIN 22 POS SLDR ST MNT 22TERM - Bulk
MS3102E36-1PX 制造商:Amphenol Corporation 功能描述:CONN MIL-DTL-5015 CIRC PIN 22 POS SLDR ST MNT 22TERM - Bulk