参数资料
型号: MS3108E22-24P
厂商: Amphenol Industrial Operations
文件页数: 62/73页
文件大小: 0K
描述: CONN PLUG 6POS RT ANG W/PINS
产品培训模块: 26482 Series 1 Miniature Cylindrical Connector
Mil-DTL-5015 and AC Threaded Connectors
标准包装: 1
系列: MIL-5015 衍生
连接器类型: 插头,公引脚
位置数: 6
外壳尺寸 - 插件: 22-24
安装类型: 自由悬挂,直角
端子: 焊杯
紧固型: 有螺纹
方向: N(正常型)
防护等级: 抗环境影响
外壳材料,表面处理: 铝,镀草绿色镉
触点表面涂层:
包装: 散装
工作温度: -55°C ~ 125°C
其它名称: MS3108E22-24P-ND
Assembly Instructions
for 10-305200 & 10-74900 cable clamps
The 10-305200 cable clamp and MS3420A sleeve illustrated are used only on
the rear of MS-A or C type connectors. The 10-74900 clamp and grommet
assembly can only be used on special feed-thru applications involving dummy
shells, part numbers 10-37090 and 10-113276.
10-305200 Cable Clamp & MS3420A Sleeve
ASSEMBLY
Both clamps are shipped from the factory with lubricant
conforming to MIL-G-3278. Remove any dirt or foreign
material from components with ethyl alcohol and relubri-
4
3
2
1
cate as outlined under “lubrication.” Place the clamping
nut (1) on the wire bundle or cable with the threads facing
toward the connector or dummy shell. Position the
tapered sleeve (2) on the bundle or cable with the narrow
portion toward the clamping nut (1). Next install either the
gland (3) used with the 10-305200 clamp or thread each
wire through the grommet (3) used with the 10-74900
1. Clamping Nut
2. Tapered Sleeve
3. Gland
4. Reducing or
Telescoping Sleeve
10-74900 Clamp and Grommet Assembly
clamp. Dependent on the application, the wire bundle or
cable is fed through the dummy shell, or the wire ends
are soldered to the connector contacts. Move the compo-
nents forward in the reverse order of preliminary assem-
bly. (In applications where grommets (3) are used, seat
the grommet against the undercut in the back shell
before bringing the tapered sleeve (2) up against it).
Insure proper positioning of glands (3) or grommets (3),
tapered sleeves (2) and clamping nuts (1). Tighten the
clamp using a strap wrench until a metal to metal seat is
obtained.
3
2
1
1. Clamping Nut
2. Tapered Sleeve
3. Grommet
61
相关PDF资料
PDF描述
VI-BNK-IU-F4 CONVERTER MOD DC/DC 40V 200W
MS27472E24F35P CONN RCPT 128POS WALL MNT W/PINS
DS1747W-120 IC RTC RAM Y2K 3.3V 120NS 32EDIP
MS3108A20-14S CONN PLUG 5POS RT ANG W/SCKT
M83723/83W2212N CONN RCPT 12POS WALL MT W/PINS
相关代理商/技术参数
参数描述
MS3108E22-27P 制造商:ITT Interconnect Solutions 功能描述:CONN 5015 CIRC PIN 9 POS SLDR RA CBL MNT - Bulk
MS3108E22-27S 功能描述:CONN PLUG 9POS INLINE W/SKTS RoHS:否 类别:连接器,互连式 >> 圆形 系列:军用, MIL-DTL-5015, MS 标准包装:1 系列:MIL-DTL-5015, CA-B 连接器类型:插头,母型插口 位置数:22 外壳尺寸 - 插件:28-11 外壳尺寸,MIL:- 安装类型:自由悬挂 端子:焊杯 紧固型:插销锁 方向:X 防护等级:IP67 - 防尘,防水 外壳材料,表面处理:铝,镀草绿色镉 触点表面涂层:银 特点:应力消除 包装:散装 触点涂层厚度:- 额定电流:22A,41A 电压 - 额定:500VAC,700VDC 工作温度:-55°C ~ 125°C 配套产品:ICA3102E28-11PXB111-ND - CONN RCPT 22 POS BOX MNT W/PINSICA3102E28-11PXB109-ND - CONN RCPT 22 POS BOX MNT W/PINSICA3100E28-11PXB-ND - CONN RCPT 22POS WALL MNT W/PINS 其它名称:ICA3106E28-11SXB
MS3108E22-28P 功能描述:CONN PLUG 7POS INLINE W/PINS RoHS:否 类别:连接器,互连式 >> 圆形 系列:军用, MIL-DTL-5015, MS 标准包装:1 系列:0B 连接器类型:插座,母形插口 位置数:3 外壳尺寸 - 插件:303 外壳尺寸,MIL:- 安装类型:面板安装,隔墙式(后端螺母) 端子:焊杯 紧固型:推挽式 方向:G 防护等级:- 外壳材料,表面处理:黄铜,镍上镀铬 触点表面涂层:金 特点:屏蔽 包装:散装 触点涂层厚度:- 额定电流:7A 电压 - 额定:- 工作温度:-55°C ~ 250°C 其它名称:Q6787373
MS3108E22-28PW 功能描述:CONN PLUG 7POS INLINE W/PINS RoHS:否 类别:连接器,互连式 >> 圆形 系列:军用, MIL-DTL-5015, MS 标准包装:1 系列:0B 连接器类型:插座,母形插口 位置数:3 外壳尺寸 - 插件:303 外壳尺寸,MIL:- 安装类型:面板安装,隔墙式(后端螺母) 端子:焊杯 紧固型:推挽式 方向:G 防护等级:- 外壳材料,表面处理:黄铜,镍上镀铬 触点表面涂层:金 特点:屏蔽 包装:散装 触点涂层厚度:- 额定电流:7A 电压 - 额定:- 工作温度:-55°C ~ 250°C 其它名称:Q6787373
MS3108E22-28PZ 制造商:Amphenol Corporation 功能描述:CONN MIL-DTL-5015 CIRC PIN 7 POS SLDR RA CBL MNT 7TERM - Bulk