- 您现在的位置：买卖IC网 > PDF目录69037 > MSC1210SS (LAPIS SEMICONDUCTOR CO LTD) 0 TIMER(S), REAL TIME CLOCK, PDIP30 PDF资料下载
参数资料
| 型号： | MSC1210SS |
| 厂商： | LAPIS SEMICONDUCTOR CO LTD |
| 元件分类： | 时钟/数据恢复及定时提取 |
| 英文描述： | 0 TIMER(S), REAL TIME CLOCK, PDIP30 |
| 封装： | 0.400 INCH, 1.778 MM PITCH, SHRINK, PLASTIC, DIP-30 |
| 文件页数： | 11/12页 |
| 文件大小： | 168K |
| 代理商： | MSC1210SS |
7/11
MSC1210
Semiconductor
FEDL1210-03
Display Mode
4-digit display of hours/minutes on a 12-hour format.
Hours display ............. between 1 and 12
Minutes display .......... between 00 and 59
The most significant digit will not appear if it is zero. (Most significant digit zero suppress
mechanism)
Correcting Clock
Hour/minute fast advance function.
Hour digits and minute digits can fast advance, separately.
The hour digit can fast advance via HS pin (Hour Set), and the minute digit via MS pin (Minute
Set) with 2 Hz period.
The hour counter or minute counter is incremented by 1 each time of pressing.
If keeping it depressed, these counters are incremented continuously with 2 Hz intervals.
The HS and MS pins, when they are open, are kept at "1" level with a pull-up resistor, and
become non-active.
These pins become active when "0" level voltage is supplied from the external source.
The hour digit and minute digit can fast advance simultaneously.
In doing the fast advance operation, the low order digit of the counter continues a normal
operation, but a carry out of the minute digit into the hour digit does not occur.
In doing the minute digit fast advance, a carry into the hour digit does not occur.
Zero Adjust Function (
±30 minutes Zero Reset)
The ZA pin (Zero Adjust), when it is open, is kept at "1" level thith a pull-up resisitor, and
becomes non-active.
This pin becomes active when "0" level voltage is supplied from the external source in order
to execute Zero Adjust operation.
If the minute digits are smaller than 30, the minute digits and second digits are reset to 00'00".
If the minute digits are larger than 30, the minute digits and second digits are reset to 00'00",
and a carry into the hour digit is executed.
Pre-second resetting of the counter is performed up to 16 Hz.
(Zero Adjust Example)
(X – 1) (hour) 30'00"
X (hour) 00'00"
X (hour) 29'59"
X (hour) 30'00"
X (hour) 59'59"
(X + 1) (hour) 00'00"
(X + 1) (hour) 29'59"
相关PDF资料 |
PDF描述 |
|---|---|
| MSC1210GS-K | 0 TIMER(S), REAL TIME CLOCK, PDSO32 |
| MSC7110VF800 | FLUORESCENT DSPL CTRL, PBGA400 |
| MSC7110VM800 | FLUORESCENT DSPL CTRL, PBGA400 |
| MSC7110VM1000 | FLUORESCENT DSPL CTRL, PBGA400 |
| MSC7118VF1200 | 0-BIT, 300 MHz, OTHER DSP, PBGA400 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MSC1210-W | 制造商:Texas Instruments 功能描述:WAFER FORM - Gel-pak, waffle pack, wafer, diced wafer on film |
| MSC1210Y2 | 制造商:TI 制造商全称:Texas Instruments 功能描述:Precision Analog-to-Digital Converter (ADC) with 8051 Microcontroller and Flash Memory |
| MSC1210Y2PAGR | 功能描述:模数转换器 - ADC Prec ADC w/ 8051 Mcntrl & Flash RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MSC1210Y2PAGRG4 | 功能描述:模数转换器 - ADC Prec Ana-to-Digital Converter RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
| MSC1210Y2PAGT | 功能描述:模数转换器 - ADC Prec ADC w/ 8051 Mcntrl & Flash RoHS:否 制造商:Texas Instruments 通道数量:2 结构:Sigma-Delta 转换速率:125 SPs to 8 KSPs 分辨率:24 bit 输入类型:Differential 信噪比:107 dB 接口类型:SPI 工作电源电压:1.7 V to 3.6 V, 2.7 V to 5.25 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-32 |
发布紧急采购，3分钟左右您将得到回复。