- 您现在的位置：买卖IC网 > Datasheet目录990 > MSLB9061 (Atmel)LED BCKLT DVR MOD 6CH I2C QFN Datasheet资料下载
参数资料
| 型号： | MSLB9061 |
| 厂商： | Atmel |
| 文件页数： | 6/16页 |
| 文件大小： | 0K |
| 描述： | LED BCKLT DVR MOD 6CH I2C QFN |
| 标准包装： | 1 |
| 输出及类型： | 6，非隔离 |
| 特点： | 可调光，I²C 接口 |
| 输入电压： | 3.3 ~ 28 V |
| 已供物品： | 板 |
| 已用 IC / 零件： | MSL1061 |
PARAMETER
CONDITIONS AND NOTES
MIN
TYP
MAX
UNIT
I2C SWITCHING CHARACTERISTICS
SCL clock frequency
Bus timeout
Bus free time between a STOP and START
condition
Hold time for a repeated START condition
Set-up time for a repeated START condition
Set-up time for STOP condition
Data hold time
I 2 C timeout disabled (Note 2)
0.5
0.26
0.26
0.26
10
25
1000
kHz
ms
μs
μs
μs
μs
ns
Data valid acknowledge time
Data valid time
Data set-up time
LOW period of the SCL clock
HIGH period of the SCL clock
Fall time of SDA and SCL signals
Rise time of both SDA and SCL signals
Pulse width of spikes that must be
suppressed by the input filter
SDA, SCL, AD0 input capacitance
(Note 3)
(Note 4)
(Note 5,6)
(Note 7)
0.05
0.05
100
0.5
0.26
50
10
0.45
0.45
120
120
μs
μs
ns
μs
μs
ns
ns
ns
pF
Note 1. Full power available with PWR input voltage greater than 6.5V. For 3.1V to 3.6V operation, doubling charge pump(U2)
and C12, C13 are required.
Note 2. Minimum SCL clock frequency is limited by the bus timeout feature, which resets the serial bus interface if either SDA or SCL
is held low for 25ms. Disable bus timeout feature for DC operation.
Note 3. Time for acknowledge signal from SCL low to SDA (out) low.
Note 4. Minimum time for SDA data out to be valid following SCL low.
Note 5. A master device must internally provide a hold time of at least 300ns for the SDA signal (refer to the V IL of the SCL signal)
in order to bridge the undefined region of SCL falling edge.
Note 6. The maximum fall times for the SDA and SCL bus lines are specified at 300ns. The maximum fall time for the SDA output
stage is specified at 250ns. This allows series protection resistors to be connected between SDA and SCL and the
SDA/SCL bus lines without exceeding the maximum specified tall time.
Note 7. Input filters on the SDA, SCL, and AD0 inputs suppress noise less than 50ns.
6
Atmel LED Driver-MSLB9061
相关PDF资料 |
PDF描述 |
|---|---|
| MSLB9082 | LED BCKLT DVR MOD 8CH I2C QFN |
| MT2000A-3.0-X-SP | HEAT SHRINK TUBING |
| MT323012 | RELAY GEN PURPOSE 3PDT 10A 12V |
| MT3330C4 | RELAY GEN PURPOSE 3PDT 10A 24V |
| MT5000-3/4-X-SP | HEAT SHRINK TUBING |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MSLB9061BC | 功能描述:LED照明驱动器 Compact 6-Channel LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MSLB9061BG | 功能描述:LED照明驱动器 Compact 6-Channel LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MSLB9061BH | 功能描述:LED照明驱动器 Compact 6-Channel LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MSLB9061CC | 功能描述:LED照明驱动器 Compact 6-Channel LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
| MSLB9061CF | 功能描述:LED照明驱动器 Compact 6-Channel LED Driver RoHS:否 制造商:STMicroelectronics 输入电压:11.5 V to 23 V 工作频率: 最大电源电流:1.7 mA 输出电流: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:SO-16N |
发布紧急采购，3分钟左右您将得到回复。