- 您现在的位置：买卖IC网 > PDF目录80594 > MSM6782-01MS-K (LAPIS SEMICONDUCTOR CO LTD) 0 TIMER(S), REAL TIME CLOCK, PDSO8 PDF资料下载
参数资料
| 型号： | MSM6782-01MS-K |
| 厂商： | LAPIS SEMICONDUCTOR CO LTD |
| 元件分类： | 时钟/数据恢复及定时提取 |
| 英文描述： | 0 TIMER(S), REAL TIME CLOCK, PDSO8 |
| 封装： | 0.250 INCH, PLASTIC, SOP-8 |
| 文件页数： | 2/18页 |
| 文件大小： | 144K |
| 代理商： | MSM6782-01MS-K |
128
Semiconductor
MSM6782-01
fr Flag
The fr flag bit indicates a carry when the CE input is at “H” level.
This bit is checked when the clock/calendar registers are read out. If this bit is set to “1”, it
is possible to read out these registers without using the HOLD bit.
This bit is cleared by setting the CE input to “L” level.
CD REGISTER (Control D Register)
30-sec ADJ (30-second adjustment bit)
When writing to this bit, if the second digits are smaller than 30, the second digits are reset
to 00, and if it is larger than 30, the second digits are reset to 00 and a carry into the minute
digit is executed. Data can not be written into the S1 ~ W registers and a “1” can not be written
into the REST bit of the CF register 125ms after writing into this bit because internal processing
is being executed. This bit holds “1” 125ms after writing, and returns to “0” automatically.
Therefore, data should be written into the S1 ~ W registers after checking that this bit has
returned to “0”.
IRQ - F
This bit is set to “1” and the STD.P output goes low in the cycle period specified by the
combination of bit t1 and bit t0 of the CE register. If INT/STND = “1”, the bit status “1” and
output level “L” are kept until reading of the CD register is complete.
After the CD register is read out, the IRQ - F bit returns to “0” and the STD.P output goes into
high impedance automatically.
If INT/STD = “0”, the IRQ -F bit returns to “0” about 7.8 ms later or immediately after the CD
register is read out, and the STD.P returns to “high impedance” about 7.8 ms later.
CAL/HW (Clock range switching bit)
CAL/HW = “1” : Seconds, minutes, hours, days, month, year, day of week
CAL/HW = “0” : Seconds, minutes, hours, day of week
If this bit is “0”, the D1, D10, MO1, MO10, Y1, Y10 registers can be used as 4-bit data RAM and
the * bits and fr bits of the D10 and MO10 registers also can be used as independent RAM,
because these registers stop clock operation.
HOLD
“1” of this bit inhibits a carry into 1-second digit.
Clock operation continues before reaching a second.
During Hold = “1”, if a carry occurs, the S1 counter is incremented by 1 second after Hold =
“0”.
This bit is cleared to zero by writing “0”.
相关PDF资料 |
PDF描述 |
|---|---|
| M32170F6VFP | 32-BIT, FLASH, 40 MHz, RISC MICROCONTROLLER, PQFP240 |
| MPPM5P2300A | 32-BIT, 300 MHz, MICROPROCESSOR, XMA |
| M41ST84W-85MH6TR | 1 TIMER(S), REAL TIME CLOCK, PDSO28 |
| MB89F969APFM | 8-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP48 |
| MB89P965APFM | 8-BIT, OTPROM, 10 MHz, MICROCONTROLLER, PQFP48 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MSM6786 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:1/3, 1/4 DUTY LCD DRIVER WITH 4-DOT COMMON DRIVER AND 29-DOT SEGMENT DRIVER |
| MSM6786G3-2K | 制造商:ROHM Semiconductor 功能描述: |
| MSM6789 | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:SBC Solid-State Recorder IC |
| MSM6789A | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:SBC Solid-State Recorder IC |
| MSM6789L | 制造商:OKI 制造商全称:OKI electronic componets 功能描述:SBC Solid-State Recorder IC |
发布紧急采购，3分钟左右您将得到回复。