参数资料
型号: MSP430CG4617IZQW
厂商: TEXAS INSTRUMENTS INC
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 8 MHz, RISC MICROCONTROLLER, PBGA113
封装: PLASTIC, BGA-113
文件页数: 22/110页
文件大小: 1605K
代理商: MSP430CG4617IZQW
MSP430xG461x
MIXED SIGNAL MICROCONTROLLER
SLAS508I APRIL 2006 REVISED MARCH 2011
19
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
LCD_A drive with regulated charge pump
The LCD_A driver generates the segment and common signals required to drive an LCD display. The LCD_A
controller has dedicated data memory to hold segment drive information. Common and segment signals are
generated as defined by the mode. Static, 2-MUX, 3-MUX, and 4-MUX LCDs are supported by this peripheral.
The module can provide a LCD voltage independent of the supply voltage with its integrated charge pump.
Furthermore it is possible to control the level of the LCD voltage and, thus, contrast by software.
watchdog timer (WDT+)
The primary function of the WDT+ module is to perform a controlled system restart after a software problem
occurs. If the selected time interval expires, a system reset is generated. If the watchdog function is not needed
in an application, the module can be configured as an interval timer and can generate interrupts at selected time
intervals.
universal serial communication interface (USCI)
The USCI modules are used for serial data communication. The USCI module supports synchronous
communication protocols like SPI (3 or 4 pin), I2C and asynchronous communication protocols like UART,
enhanced UART with automatic baudrate detection, and IrDA.
The USCI_A0 module provides support for SPI (3 or 4 pin), UART, enhanced UART and IrDA.
The USCI_B0 module provides support for SPI (3 or 4 pin) and I2C.
USART1
The hardware universal synchronous/asynchronous receive transmit (USART) peripheral module is used for
serial data communication. The USART supports synchronous SPI (3 or 4 pin) and asynchronous UART
communication protocols, using double-buffered transmit and receive channels.
hardware multiplier
The multiplication operation is supported by a dedicated peripheral module. The module performs 16
16,
16
8, 8
16, and 8
8 bit operations. The module is capable of supporting signed and unsigned multiplication,
as well as signed and unsigned multiply and accumulate operations. The result of an operation can be accessed
immediately after the operands have been loaded into the peripheral registers. No additional clock cycles are
required.
相关PDF资料
PDF描述
MC9S08QG44CDTE 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDSO16
MC9S08DN16VLC 8-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP32
M30626FJPFPU7C 16-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP100
MC9S12XEQ512CAAR 32-BIT, FLASH, 50 MHz, RISC MICROCONTROLLER, PQFP80
MC9S08RC8PE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PDIP28
相关代理商/技术参数
参数描述
MSP430CG4618IPZ 制造商:TI 制造商全称:Texas Instruments 功能描述:MIXED SIGNAL MICROCONTROLLER
MSP430CG4618IZQW 制造商:TI 制造商全称:Texas Instruments 功能描述:MIXED SIGNAL MICROCONTROLLER
MSP430CG4619IPZ 制造商:TI 制造商全称:Texas Instruments 功能描述:MIXED SIGNAL MICROCONTROLLER
MSP430CG4619IZQW 制造商:TI 制造商全称:Texas Instruments 功能描述:MIXED SIGNAL MICROCONTROLLER
MSP430E325AFZ 制造商:Rochester Electronics LLC 功能描述: 制造商:Texas Instruments 功能描述: