参数资料
型号: MSPPLAD15KP15TR
厂商: MICROSEMI CORP-SCOTTSDALE
元件分类: 参考电压二极管
英文描述: 15000 W, UNIDIRECTIONAL, SILICON, TVS DIODE
封装: PLASTIC PACKAGE-1
文件页数: 1/5页
文件大小: 247K
代理商: MSPPLAD15KP15TR
15,000 W SURFACE MOUNT TRANSIENT
VOLTAGE SUPPRESSOR
WWW
.Microse
m
i
.CO
M
S C O T TS DALE DIVISION
PLAD15KP5.0 thru PLAD15KP400CA, e3
PLAD15KP5.0-
400CA,
e3
DESCRIPTION
APPEARANCE
These Microsemi 15 kW Transient Voltage Suppressors (TVSs)
are designed for applications requiring protection of voltage-
sensitive electronic devices that may be damaged by harsh or
severe voltage transients including lightning per IEC61000-4-5 and
classes with various source impedances described herein. This
series is available in 5.0 to 400 volt standoff voltages (VWM) in both
unidirectional and bidirectional offered in one surface mount
device. Microsemi also offers numerous other TVS products to
meet higher and lower power demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
Microsemi
Scottsdale Division
Page 1
FEATURES
APPLICATIONS / BENEFITS
Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
Low profile surface mount
Available in tape-and-reel or waffle pack
Selections for 5.0 to 400 volts standoff voltages (VWM)
Suppresses transients up to 15,000 watts @ 10/1000 s
(see Figure 1)
Fast response
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55
oC to +150oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are also
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding “e3” suffix
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2
and IEC 61000-4-4
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: PLAD15KP5.0A to 400A or CA
Class 5: PLAD15KP5.0A to 400A or CA
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1,2,3,4: PLAD15KP5.0A to 400A or CA
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2,3: PLAD15KP5.0A to 400A or CA
Class 4: PLAD15KP5.0 to 54A or CA
Pin injection protection per RTCA/DO-160D for
Waveform 4 (6.4/69 s):
Level 4: PLAD15KP5.0A to 400A or CA
Level 5: PLAD15KP5.0A to 100A or CA
Pin injection protection per RTCA/DO-160D for
Waveform 5A (40/120 s):
Level 4: PLAD15KP5.0A to 28A or CA
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Operating and Storage temperature: -55C to +150C
Peak Pulse Power dissipation at 25C: 15,000 watts at
10/1000 μs (also see Figures 1 and 2)
Impulse repetition rate (duty factor): 0.05%
tclamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Thermal resistance: 0.2 C/W junction to case or 50C/W
junction to ambient when mounted on FR4 PC board with
recommended mounting pad (see last page)
Steady-State Power dissipation: 50 watts at TC = 100oC
with good heat sink, or 2.5 watts at TA = 25
C if mounted on
FR4 PC board as described for thermal resistance
Forward Surge Voltage: 3.5 V maximum @ 500 Amps 8.3
ms half-sine wave (unidirectional devices only)
Solder temperatures: 260 C for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
TERMINALS: Tin-Lead or RoHS Compliant
annealed matte-Tin plating readily solderable per
MIL-STD-750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode. Bidirectional
not marked for polarity
WEIGHT: 1 gram (approximate)
TAPE & Reel: Standard per EIA-481-B (add “TR”
suffix to part number)
See package dimensions on last page
Copyright
2006
7-19-2006 REV D
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
相关PDF资料
PDF描述
MSPPLAD15KP16CA 15000 W, BIDIRECTIONAL, SILICON, TVS DIODE
MSPPLAD15KP170ATR 15000 W, UNIDIRECTIONAL, SILICON, TVS DIODE
MSPPLAD15KP22C 15000 W, BIDIRECTIONAL, SILICON, TVS DIODE
MSPPLAD15KP24CTR 15000 W, BIDIRECTIONAL, SILICON, TVS DIODE
MSPPLAD15KP28CE3 15000 W, BIDIRECTIONAL, SILICON, TVS DIODE
相关代理商/技术参数
参数描述
MSP-PRGS430 功能描述:程序设计器 - 基于处理器 MSP-PRGS430 Serial Programmer RoHS:否 制造商:Olimex Ltd. 产品:Programmers 工具用于评估:XMEGA, MegaAVR, tinyAVR 核心:AVR 接口类型:USB 工作电源电压:1.8 V to 5.5 V
MSPRTA046WRE0 制造商:Sharp 功能描述:LATCH SPRING R1800
MSPRTA161WRE0 制造商:Sharp 功能描述:SPRING R9H84B
MSPS- 3-01 制造商:Richco 功能描述:Bulk
MSPS- 5-01 制造商:Richco 功能描述:Bulk