参数资料
型号: MT9234ZBA-USB-CP
厂商: Multi-Tech Systems
文件页数: 13/66页
文件大小: 0K
描述: MODEM V.92 DATA/FAX USB WORLD
标准包装: 1
系列: MultiModem® ZBA
数据格式: V.34,V.92
安装类型: 台式
封装/外壳: 5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm)
包装: 散装
Chapter 1 – AT Commands, S-Registers, and Result Codes
X
Description:
Select Result Code and Monitor Call Progress
Use this command to enable tone detection options used in the dialing process. As
each function is chosen, the modem’s result codes are also affected. Therefore, this
command is frequently used to control the modem’s responses. The primary function
of this command is to control call response capabilities.
Function
Ext Result Codes
Dial Tone Detect
Busy Tone Detect
Enabled
Modem displays basic result
codes, connect messages with
data rate, and an indication of
the modems error correction
and data compression
operations.
Modem dials upon detection of
a dial tone, and disconnects the
call if the dial tone is not
detected within 10 seconds.
Modem monitors for busy tones.
Disabled
Modem displays the basic
result codes.
Modem dials a call regardless
of whether it detects a dial
tone. Register S6 contains
the dial delay.
Modem ignores any busy
tones it receives.
Syntax:
Values:
ATX<value>
Command Extended Result Codes Dial Tone Detect Busy Tone Detect
0
Disabled Disabled Disabled
1 Enabled Disabled Disabled
2 Enabled Enabled Disabled
3 Enabled Disabled Enabled
4 Enabled Enabled Enabled
5, 6 Enabled Enabled Enabled
7 Disabled Enabled Enabled
Default: 4
Result Codes: OK if <value> = 0 to 7.
ERROR if <value> ≠ 0 to 7.
Call Progress Result Codes:
Command Result Codes
0
1
2
3
4
5, 6
7
OK, RING, ERROR, CONNECT, NO CARRIER
OK, RING, ERROR, CONNECT<RATE>, NO CARRIER
OK, RING, ERROR, CONNECT<RATE>, NO CARRIER, NO DIALTONE
OK, RING, ERROR, CONNECT<RATE>, NO CARRIER, BUSY,
BLACKLISTED
OK, RING, ERROR, CONNECT<RATE>, NO CARRIER, BUSY,
BLACKLISTED, DELAYED, NO DIALTONE, CALL WAITING
DETECTED
OK, RING, ERROR, CONNECT<RATE>, NO CARRIER, BUSY,
BLACKLISTED, DELAYED, NO DIALTONE, CALL WAITING
DETECTED
OK, RING, ERROR, CONNECT, NO CARRIER
Z
Description:
Syntax:
Values:
Default:
Result Codes:
Reset and Recall Stored Profile
Use this command to make the modem go on-hook and restore the profile saved by
the last &W command.
Note: Both Z0 or Z1 restore the same profile (See &W – Store Current Configuration).
Agere Systems controller-based modems have only one stored profile.
ATZ<value>
0 Reset and restore stored profile (saved by the last &W command).
1 Same as Z0 .
None
OK if <value> = 0 to 1.
ERROR if <value> ≠ 0 to 1.
Multi-Tech Systems, Inc. AT Commands for the MultiModem & SocketModem MT9234 Series (S000434H)
13
相关PDF资料
PDF描述
MT9234ZBA-USB MODEM V.92 DATA/FAX WORLD USB
MT9234ZPX-PCIE-CP MODEM V.92 DATA/FAX/VOICE WORLD
MT9M032I12STCH ES KIT HEAD BOARD FOR MT9M032
MT9T031P12STCH ES KIT HEAD BOARD FOR MT9T031
MT9V022I77ATMH ES KIT HEAD BOARD FOR MT9V022
相关代理商/技术参数
参数描述
MT9234ZBA-V-EU 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-GB/IE 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-IEC 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-NAM 功能描述:MODEM V.92 DATA/FAX/VOICE WORLD RoHS:是 类别:计算机,办公室 - 元件,配件 >> 调制解调器 系列:MultiModem® ZBA 标准包装:1 系列:MultiModem® ZBA 数据格式:V.34,V.92 波特率:- 电源电压:- 安装类型:台式 封装/外壳:5.7" L x 4.3" W x 1.0" H(145mm x 109mm x 25mm) 供应商设备封装:- 包装:散装
MT9234ZBA-V-NPS-CP 制造商:Multi-Tech Systems 功能描述:V.92 VOICE/DATA/FAX WORLD MODEM (NO POWER SUPPLY) (25 MODEMS - Bulk